DOOSAN
Year of manufacture : 2004
Maximum turning length (Z-axis) : 31.5 in
Maximum travel length in the X-axis : 10 in
Maximum travel length in the Y-axis : 4.7 in
Maximum power of the main spindle : 34.9 hp
Maximum turning length (Z-axis) : 31.5 in
Maximum travel length in the X-axis : 10 in
Maximum travel length in the Y-axis : 4.7 in
Maximum power of the main spindle : 34.9 hp
Netherlands
Gelderland
Gelderland
Year of manufacture : 1997
CNC control model : Fanuc OT
Maximum turning length (Z-axis) : 42.3 in
Turning diameter over bed (max) : 35.4 in
Maximum travel length in the X-axis : 14.6 in
CNC control model : Fanuc OT
Maximum turning length (Z-axis) : 42.3 in
Turning diameter over bed (max) : 35.4 in
Maximum travel length in the X-axis : 14.6 in
Netherlands
Year of manufacture : 1998
CNC control model : Fanuc 18-T
Maximum turning length (Z-axis) : 52.4 in
Turning diameter over bed (max) : 22.4 in
Maximum travel length in the X-axis : 11.1 in
CNC control model : Fanuc 18-T
Maximum turning length (Z-axis) : 52.4 in
Turning diameter over bed (max) : 22.4 in
Maximum travel length in the X-axis : 11.1 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1998
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2200 lb
United States
Colorado
Colorado
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 20.5 in
Width of the working table : 53.2 in
Number of tools in the magazine : 24 pcs
CNC control model : FANUC 0i-MB
Length of the working table : 20.5 in
Width of the working table : 53.2 in
Number of tools in the magazine : 24 pcs
United States
California
California
Year of manufacture : 2003
CNC control model : FANUC CNC CONTROL
CNC control model : FANUC CNC CONTROL
United States
California
California
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 53.1 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1870 lb
CNC control model : FANUC 0i-MB
Length of the working table : 53.1 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1870 lb
United States
South Carolina
South Carolina
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Number of spindles : 2 pcs
Maximum power of the main spindle : 30 hp
Maximum rotary speed of the main spindle : 5000 rpm
CNC control model : FANUC 18i-TB
Number of spindles : 2 pcs
Maximum power of the main spindle : 30 hp
Maximum rotary speed of the main spindle : 5000 rpm
United States
Wisconsin
Wisconsin
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 33.5 in
Maximum turning diameter : 39.4 in
Maximum travel length in the X-axis : 18.5 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 33.5 in
Maximum turning diameter : 39.4 in
Maximum travel length in the X-axis : 18.5 in
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP CONTROL
Maximum turning length (Z-axis) : 36.3 in
Turning diameter over bed (max) : 13.8 in
Subspindle
CNC control model : OKUMA OSP CONTROL
Maximum turning length (Z-axis) : 36.3 in
Turning diameter over bed (max) : 13.8 in
Subspindle
United States
California
California
Year of manufacture : 1997
CNC control model : FANUC i SERIES
Maximum turning length (Z-axis) : 41 in
Turning diameter over bed (max) : 30.3 in
Turning diameter over cross slide (max) : 23.2 in
CNC control model : FANUC i SERIES
Maximum turning length (Z-axis) : 41 in
Turning diameter over bed (max) : 30.3 in
Turning diameter over cross slide (max) : 23.2 in
United States
New York
New York
Year of manufacture : 2000
CNC control model : FANUC 32i-A
Maximum turning length (Z-axis) : 126 in
Turning diameter over bed (max) : 40.5 in
Turning diameter over cross slide (max) : 31.5 in
CNC control model : FANUC 32i-A
Maximum turning length (Z-axis) : 126 in
Turning diameter over bed (max) : 40.5 in
Turning diameter over cross slide (max) : 31.5 in
United States
New York
New York
Year of manufacture : 1999
CNC control model : FANUC 32i-A
Maximum turning length (Z-axis) : 63 in
Turning diameter over bed (max) : 40.5 in
Turning diameter over cross slide (max) : 31.5 in
CNC control model : FANUC 32i-A
Maximum turning length (Z-axis) : 63 in
Turning diameter over bed (max) : 40.5 in
Turning diameter over cross slide (max) : 31.5 in
United States
New York
New York
Year of manufacture : 1997
CNC control model : FANUC 21i-TB
Maximum turning length (Z-axis) : 126 in
Turning diameter over bed (max) : 40.6 in
Turning diameter over cross slide (max) : 31.5 in
CNC control model : FANUC 21i-TB
Maximum turning length (Z-axis) : 126 in
Turning diameter over bed (max) : 40.6 in
Turning diameter over cross slide (max) : 31.5 in
United States
New York
New York
Year of manufacture : 2005
CNC control model : FANUC 21i-T
Diameter of the table : 15 in
Maximum turning diameter : 22.8 in
Maximum feed rate of the transverse beam : 787.4 in/min
CNC control model : FANUC 21i-T
Diameter of the table : 15 in
Maximum turning diameter : 22.8 in
Maximum feed rate of the transverse beam : 787.4 in/min
United States
Michigan
Michigan
Year of manufacture : 2006
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 17.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 12.2 in
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 17.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 12.2 in
United States
Illinois
Illinois
Year of manufacture : 2006
CNC control model : FANUC
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 11 in
CNC control model : FANUC
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 11 in
27907 USD
Poland
Year of manufacture : 2006
CNC control model : FANUC 21i-MB
Length of the working table : 33.9 in
Width of the working table : 22 in
Number of tools in the magazine : 24 pcs
CNC control model : FANUC 21i-MB
Length of the working table : 33.9 in
Width of the working table : 22 in
Number of tools in the magazine : 24 pcs
36785 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2003
CNC control model : FANUC 32i
Length of the working table : 47.2 in
Width of the working table : 21.3 in
Power of the spindle drive : 24.8 hp
CNC control model : FANUC 32i
Length of the working table : 47.2 in
Width of the working table : 21.3 in
Power of the spindle drive : 24.8 hp
France
Rhône
Rhône
Year of manufacture : 2001
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 11 in
Maximum power of the main spindle : 10.1 hp
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 11 in
Maximum power of the main spindle : 10.1 hp
France
Isère
Isère
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 59.8 in
Maximum turning diameter : 29.5 in
Maximum travel length in the X-axis : 21.9 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 59.8 in
Maximum turning diameter : 29.5 in
Maximum travel length in the X-axis : 21.9 in
France
Isère
Isère
Year of manufacture : 2006
CNC control model : FANUC 21i-TB
Maximum turning length (Z-axis) : 50.4 in
Turning diameter over bed (max) : 22.4 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : FANUC 21i-TB
Maximum turning length (Z-axis) : 50.4 in
Turning diameter over bed (max) : 22.4 in
Turning diameter over cross slide (max) : 14.6 in
France
Isère
Isère
Year of manufacture : 1997
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 22.4 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 22.4 in
Turning diameter over cross slide (max) : 14.6 in
France
Isère
Isère
Year of manufacture : 2003
CNC control model : FANUC 18i-MB
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 3527.4 lb
CNC control model : FANUC 18i-MB
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 3527.4 lb
France
Isère
Isère
Year of manufacture : 2001
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 12.2 in
Maximum feed rate in X-axis : 944.9 in/min
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 12.2 in
Maximum feed rate in X-axis : 944.9 in/min
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Lathes DOOSAN
Lathes DOOSAN PUMA 300 LC [1]Lathes DOOSAN 400B [1]
CNC Lathes and Turning Centers DOOSAN
CNC Lathes and Turning Centers DOOSAN PUMA 2600 B [4]CNC Lathes and Turning Centers DOOSAN PUMA V 550 [3]
CNC Milling Machines and Machining Centers DOOSAN
CNC Milling Machines and Machining Centers DOOSAN HM 1250 [5]CNC Milling Machines and Machining Centers DOOSAN Lynx 220 Lc [3]
Boring Machines DOOSAN
Boring Machines DOOSAN DBC 130 [4]Boring Machines DOOSAN DB 130-CX [2]
Industrial Robots DOOSAN
Industrial Robots DOOSAN M0617 [1]Forklifts DOOSAN
Forklifts DOOSAN B25X-7 [1]
