Surface Grinding Machines / page 15
Year of manufacture : 1990
Length of the working table : 59.1 in
Width of the working table : 15.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Maximum length of grinding (without the grinding wheel output) X-axis : 59.1 in
Length of the working table : 59.1 in
Width of the working table : 15.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Maximum length of grinding (without the grinding wheel output) X-axis : 59.1 in
India
Maharashtra
Maharashtra
Year of manufacture : 1980
Length of the working table : 82.7 in
Width of the working table : 29.1 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Permanent magnetic chuck
Length of the working table : 82.7 in
Width of the working table : 29.1 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Permanent magnetic chuck
India
Maharashtra
Maharashtra
Year of manufacture : 1986
Length of the working table : 118.1 in
Width of the working table : 27.6 in
Length of the working table : 118.1 in
Width of the working table : 27.6 in
India
Maharashtra
Maharashtra
Year of manufacture : 1980
Length of the working table : 36 in
Width of the working table : 36 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 11 in
Power of the spindle drive : 40.2 hp
Length of the working table : 36 in
Width of the working table : 36 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 11 in
Power of the spindle drive : 40.2 hp
India
Maharashtra
Maharashtra
Year of manufacture : 1988
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Maximum length of grinding (without the grinding wheel output) X-axis : 39.4 in
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Maximum length of grinding (without the grinding wheel output) X-axis : 39.4 in
India
Maharashtra
Maharashtra
Year of manufacture : 1993
Length of the working table : 63 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 25.6 in
Power of the spindle drive : 14.7 hp
Length of the working table : 63 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 25.6 in
Power of the spindle drive : 14.7 hp
Italy
Brescia
Brescia
Year of manufacture : 1991
Length of the working table : 157.5 in
Width of the working table : 27.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Power of the spindle drive : 26.8 hp
Length of the working table : 157.5 in
Width of the working table : 27.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Power of the spindle drive : 26.8 hp
Italy
Brescia
Brescia
Year of manufacture : 1992
Length of the working table : 98.4 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 29.5 in
Power of the spindle drive : 20.1 hp
Length of the working table : 98.4 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 29.5 in
Power of the spindle drive : 20.1 hp
Italy
Brescia
Brescia
Year of manufacture : 1983
Length of the working table : 39.4 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Power of the spindle drive : 10.1 hp
Length of the working table : 39.4 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Power of the spindle drive : 10.1 hp
Italy
Bolzano
Bolzano
Year of manufacture : 1989
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.8 in
Power of the spindle drive : 7.4 hp
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.8 in
Power of the spindle drive : 7.4 hp
Italy
Brescia
Brescia
Year of manufacture : 1990
Length of the working table : 25 in
Width of the working table : 8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 16.1 in
Power of the spindle drive : 2.7 hp
Length of the working table : 25 in
Width of the working table : 8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 16.1 in
Power of the spindle drive : 2.7 hp
Italy
Brescia
Brescia
Year of manufacture : 1993
Length of the working table : 27.6 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 17.7 in
Power of the spindle drive : 16.1 hp
Length of the working table : 27.6 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 17.7 in
Power of the spindle drive : 16.1 hp
Italy
Brescia
Brescia
Year of manufacture : 1985
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 11.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 19.7 in
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 11.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 19.7 in
Italy
Brescia
Brescia
Year of manufacture : 1993
Length of the working table : 24.8 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.6 in
Power of the spindle drive : 2.9 hp
Length of the working table : 24.8 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.6 in
Power of the spindle drive : 2.9 hp
Italy
Year of manufacture : 1983
Length of the working table : 47.2 in
Width of the working table : 23.6 in
Power of the spindle drive : 14.8 hp
Minimum longitudinal feed rate (Z-axis) : 0.03937 in/min
Length of the working table : 47.2 in
Width of the working table : 23.6 in
Power of the spindle drive : 14.8 hp
Minimum longitudinal feed rate (Z-axis) : 0.03937 in/min
Italy
Year of manufacture : 1988
Maximum length of grinding (without the grinding wheel output) X-axis : 7.1 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 4.7 in
Diameter of a new grinding wheel : 7.1 in
Maximum length of grinding (without the grinding wheel output) X-axis : 7.1 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 4.7 in
Diameter of a new grinding wheel : 7.1 in
Italy
Year of manufacture : 1987
Length of the working table : 27.6 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 21.7 in
Power of the spindle drive : 16.1 hp
Length of the working table : 27.6 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 21.7 in
Power of the spindle drive : 16.1 hp
Italy
Year of manufacture : 1992
Length of the working table : 133.9 in
Width of the working table : 13.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Power of the spindle drive : 13.4 hp
Length of the working table : 133.9 in
Width of the working table : 13.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Power of the spindle drive : 13.4 hp
Italy
Year of manufacture : 1986
Length of the working table : 35.4 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Power of the spindle drive : 10.7 hp
Length of the working table : 35.4 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Power of the spindle drive : 10.7 hp
Italy
Year of manufacture : 1986
CNC control model : SINUMERIK 805 SINUMERIK 805
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
CNC control model : SINUMERIK 805 SINUMERIK 805
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
10627 USD
Poland
Year of manufacture : 1988
Central lubrication
Lighting
Technical documentation
Central lubrication
Lighting
Technical documentation
3270 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1954
CNC control model : więcej informacji telefonicznie więcej informacji te
CNC control model : więcej informacji telefonicznie więcej informacji te
1144 USD
Poland
Świętokrzyskie
Świętokrzyskie
Year of manufacture : 1972
Length of the working table : 31.5 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 12.6 in
Total power demand : 29.5 hp
Machine weight : 7.2 short ton
Length of the working table : 31.5 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 12.6 in
Total power demand : 29.5 hp
Machine weight : 7.2 short ton
5313 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1990
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.4 in
Total power demand : 40.2 hp
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.4 in
Total power demand : 40.2 hp
6267 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1980
Length of the working table : 19.7 in
Width of the working table : 7.9 in
Central lubrication
Lighting
Length of the working table : 19.7 in
Width of the working table : 7.9 in
Central lubrication
Lighting
2452 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1990
Electromagnetic chuck
Dust extractor
Magnetic coolant filter (magnetic separator)
Central lubrication
Electromagnetic chuck
Dust extractor
Magnetic coolant filter (magnetic separator)
Central lubrication
3134 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1980
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Total power demand : 16.1 hp
Machine height : 89 in
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Total power demand : 16.1 hp
Machine height : 89 in
9264 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1983
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Machine weight : 5.5 short ton
Central lubrication
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Machine weight : 5.5 short ton
Central lubrication
3542 USD
Poland
Dolnośląskie
Dolnośląskie
