Surface Grinding Machines / page 13
Year of manufacture : 1983
Length of the working table : 7.9 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 0.393701 in
Power of the spindle drive : 2.7 hp
Length of the working table : 7.9 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 0.393701 in
Power of the spindle drive : 2.7 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1980
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 11.8 in
Maximum table load (evenly distributed) : 661.4 lb
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 11.8 in
Maximum table load (evenly distributed) : 661.4 lb
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1988
Length of the working table : 59.1 in
Width of the working table : 59.1 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 29.5 in
Maximum table load (evenly distributed) : 4409.3 lb
Length of the working table : 59.1 in
Width of the working table : 59.1 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 29.5 in
Maximum table load (evenly distributed) : 4409.3 lb
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1975
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Rotary working table
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Rotary working table
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1976
Length of the working table : 27.6 in
Width of the working table : 27.6 in
Minimum rotary speed of the spindle : 3000 1/min
Minimum longitudinal feed rate (Z-axis) : 5.9 in/min
Length of the working table : 27.6 in
Width of the working table : 27.6 in
Minimum rotary speed of the spindle : 3000 1/min
Minimum longitudinal feed rate (Z-axis) : 5.9 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1983
Length of the working table : 39.4 in
Width of the working table : 29.5 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Maximum table load (evenly distributed) : 2204.6 lb
Length of the working table : 39.4 in
Width of the working table : 29.5 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Maximum table load (evenly distributed) : 2204.6 lb
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1971
Length of the working table : 9.8 in
Width of the working table : 5.9 in
Power of the spindle drive : 1.6 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 9.8 in
Length of the working table : 9.8 in
Width of the working table : 5.9 in
Power of the spindle drive : 1.6 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 9.8 in
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1980
Length of the working table : 23.6 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 19.7 in
Length of the working table : 23.6 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 19.7 in
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1990
CNC control model : SIEMENS SINUMERIK 810 GA 1
Length of the working table : 31.5 in
Width of the working table : 11.8 in
Power of the spindle drive : 12.1 hp
CNC control model : SIEMENS SINUMERIK 810 GA 1
Length of the working table : 31.5 in
Width of the working table : 11.8 in
Power of the spindle drive : 12.1 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1959
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 23.6 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Diameter of a new grinding wheel : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 23.6 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Diameter of a new grinding wheel : 7.9 in
872 USD
Germany
Year of manufacture : 1987
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.6 in
Maximum length of grinding (without the grinding wheel output) X-axis : 24.8 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Diameter of a new grinding wheel : 9.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.6 in
Maximum length of grinding (without the grinding wheel output) X-axis : 24.8 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Diameter of a new grinding wheel : 9.8 in
Germany
Year of manufacture : 1983
Length of the working table : 98.4 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 26.1 in
Maximum rotary speed of the spindle : 960 1/min
Length of the working table : 98.4 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 26.1 in
Maximum rotary speed of the spindle : 960 1/min
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1981
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 24.8 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 24.8 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1988
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 7.7 in
Power of the spindle drive : 10.1 hp
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 7.7 in
Power of the spindle drive : 10.1 hp
Switzerland
Bern
Bern
Year of manufacture : 1988
Length of the working table : 52 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Maximum longitudinal feed rate (Z-axis) : 7.9 in/min
Length of the working table : 52 in
Width of the working table : 11.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Maximum longitudinal feed rate (Z-axis) : 7.9 in/min
Switzerland
Bern
Bern
Year of manufacture : 1991
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Permanent magnetic chuck
Length of the working table : 23.6 in
Width of the working table : 23.6 in
Permanent magnetic chuck
Switzerland
Bern
Bern
Year of manufacture : 1972
Length of the working table : 29.9 in
Width of the working table : 7.9 in
Power of the spindle drive : 2.9 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 17.7 in
Length of the working table : 29.9 in
Width of the working table : 7.9 in
Power of the spindle drive : 2.9 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 17.7 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1987
Length of the working table : 39.4 in
Width of the working table : 12.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 16.5 in
Maximum length of grinding (without the grinding wheel output) X-axis : 39.4 in
Length of the working table : 39.4 in
Width of the working table : 12.6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 16.5 in
Maximum length of grinding (without the grinding wheel output) X-axis : 39.4 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1988
Length of the working table : 48.4 in
Width of the working table : 11.8 in
Electromagnetic chuck
Demagnetizing of the chuck
Length of the working table : 48.4 in
Width of the working table : 11.8 in
Electromagnetic chuck
Demagnetizing of the chuck
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1960
Length of the working table : 23.6 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Power of the spindle drive : 4 hp
Length of the working table : 23.6 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Power of the spindle drive : 4 hp
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1984
Width of the working table : 24.4 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Power of the spindle drive : 93.8 hp
Minimum longitudinal feed rate (Z-axis) : 39.4 in/min
Width of the working table : 24.4 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.6 in
Power of the spindle drive : 93.8 hp
Minimum longitudinal feed rate (Z-axis) : 39.4 in/min
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1991
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.2 in
Power of the spindle drive : 30.8 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 118.1 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 29.5 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 27.2 in
Power of the spindle drive : 30.8 hp
Maximum length of grinding (without the grinding wheel output) X-axis : 118.1 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 29.5 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1992
CNC control model : MARPOS E 9
Power of the spindle drive : 174.3 hp
Minimum rotary speed of the spindle : 55 1/min
Maximum rotary speed of the spindle : 1470 1/min
CNC control model : MARPOS E 9
Power of the spindle drive : 174.3 hp
Minimum rotary speed of the spindle : 55 1/min
Maximum rotary speed of the spindle : 1470 1/min
Ukraine
Київська область
Київська область
Year of manufacture : 1982
Maximum height of the grinded workpieces (for a new grinding wheel) : 9.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 17.7 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Permanent magnetic chuck
Maximum height of the grinded workpieces (for a new grinding wheel) : 9.8 in
Maximum length of grinding (without the grinding wheel output) X-axis : 17.7 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 7.9 in
Permanent magnetic chuck
Austria
Oberösterreich
Oberösterreich
Year of manufacture : 1980
Length of the working table : 59.1 in
Width of the working table : 19.7 in
Power of the spindle drive : 60.3 hp
Diameter of a new grinding wheel : 22.8 in
Length of the working table : 59.1 in
Width of the working table : 19.7 in
Power of the spindle drive : 60.3 hp
Diameter of a new grinding wheel : 22.8 in
Austria
Oberösterreich
Oberösterreich
Year of manufacture : 1980
Length of the working table : 59.1 in
Width of the working table : 19.7 in
Power of the spindle drive : 60.3 hp
Length of the working table : 59.1 in
Width of the working table : 19.7 in
Power of the spindle drive : 60.3 hp
Austria
Oberösterreich
Oberösterreich
Year of manufacture : 1971
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Diameter of a new grinding wheel : 11.8 in
Maximum diameter of a grinding wheel : 2 in
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Diameter of a new grinding wheel : 11.8 in
Maximum diameter of a grinding wheel : 2 in
Austria
Oberösterreich
Oberösterreich
Year of manufacture : 1963
Length of the working table : 59.1 in
Width of the working table : 15.7 in
Maximum length of grinding (without the grinding wheel output) X-axis : 59.1 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 19.7 in
Length of the working table : 59.1 in
Width of the working table : 15.7 in
Maximum length of grinding (without the grinding wheel output) X-axis : 59.1 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 19.7 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1971
Length of the working table : 78.7 in
Width of the working table : 35.4 in
Length of the working table : 78.7 in
Width of the working table : 35.4 in
11076 USD
Poland
Małopolskie
Małopolskie
Year of manufacture : 1988
Length of the working table : 31.5 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 1650 1/min
Maximum length of grinding (without the grinding wheel output) X-axis : 31.5 in
Length of the working table : 31.5 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 1650 1/min
Maximum length of grinding (without the grinding wheel output) X-axis : 31.5 in
Spain
Barcelona
Barcelona
