OKUMA / page 3
Year of manufacture : 2001
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : OKUMA OSP-700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP-700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 15.8 in
United States
Michigan
Michigan
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
Number of spindles : 2 pcs
CNC control model : OKUMA OSP U 100
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
Number of spindles : 2 pcs
United States
Michigan
Michigan
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
United States
Michigan
Michigan
Year of manufacture : 2003
CNC control model : OKUMA U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Michigan
Michigan
Year of manufacture : 2003
CNC control model : OKUMA OSPE 100 M
Length of the working table : 30 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKUMA OSPE 100 M
Length of the working table : 30 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 880 lb
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Ohio
Ohio
Year of manufacture : 2002
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Ohio
Ohio
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 28 in
Turning diameter over cross slide (max) : 18.9 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 28 in
Turning diameter over cross slide (max) : 18.9 in
United States
Ohio
Ohio
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
United States
Illinois
Illinois
Year of manufacture : 2000
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1990
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1993
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
United States
Illinois
Illinois
Year of manufacture : 1988
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
United States
Illinois
Illinois
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
Year of manufacture : 1996
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 36.2 in
Turning diameter over bed (max) : 19.3 in
Turning diameter over cross slide (max) : 16.9 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 36.2 in
Turning diameter over bed (max) : 19.3 in
Turning diameter over cross slide (max) : 16.9 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : OKUMA OSP-U 100 L
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP-U 100 L
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 5020 M
Length of the working table : 47.2 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 700 lb
CNC control model : OKUMA OSP 5020 M
Length of the working table : 47.2 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 700 lb
United States
Illinois
Illinois
Year of manufacture : 1989
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
8147 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Spain
Barcelona
Barcelona
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA CROWN 762 SBB [2]CNC Lathes and Turning Centers OKUMA MACTURN 250 W [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MA-40 HA [3]CNC Milling Machines and Machining Centers OKUMA MX-60 HB [3]
