OKUMA / page 2
Year of manufacture : 2001
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 28.7 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 7.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : OSP U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OSP U 100 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
CNC control model : OSP 5020 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Maximum travel length in the X-axis : 6.9 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 2002
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 1998
CNC control model : OKUMA CNC CONTROL
Length of the working table : 40 in
Width of the working table : 20 in
Maximum rotary speed of the vertical spindle : 6000 1/min
CNC control model : OKUMA CNC CONTROL
Length of the working table : 40 in
Width of the working table : 20 in
Maximum rotary speed of the vertical spindle : 6000 1/min
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 5000 1/min
CNC control model : OKUMA OSP 7000 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 5000 1/min
United States
California
California
Year of manufacture : 1991
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
California
California
Year of manufacture : 1990
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
California
California
Year of manufacture : 1981
CNC control model : OKUMA OSP-2200 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : OKUMA OSP-2200 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.4 in
United States
California
California
Year of manufacture : 1989
CNC control model : OKUMA CNC CONTROL
CNC control model : OKUMA CNC CONTROL
United States
California
California
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 47.2 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP 700 M
Length of the working table : 47.2 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1500 lb
19500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1989
CNC control model : OKUMA OSP 5000 L-G
Maximum turning length (Z-axis) : 50 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
CNC control model : OKUMA OSP 5000 L-G
Maximum turning length (Z-axis) : 50 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 39.4 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 39.4 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 1992
CNC control model : OKUMA OSP-5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP-5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 1991
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 25.5 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.7 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 25.5 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.7 in
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : OKUMA OSP-700 L
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-700 L
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 10.6 in
United States
Michigan
Michigan
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Michigan
Michigan
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 G
Maximum length of the grinding (shaft) : 25.6 in
Maximum diameter of the grinding (shaft) : 13 in
Maximum weight of the shaft between the centers : 110 lb
CNC control model : OKUMA OSP 700 G
Maximum length of the grinding (shaft) : 25.6 in
Maximum diameter of the grinding (shaft) : 13 in
Maximum weight of the shaft between the centers : 110 lb
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : OKUMA OSP 700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Lathes OKUMA
Lathes OKUMA V80R [1]CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB-25 [3]CNC Lathes and Turning Centers OKUMA LU-15/2SC [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA CADET MATE [4]CNC Milling Machines and Machining Centers OKUMA MA 50 HB [4]
