Vertical Milling Machine STANKOIMPORT 6 Т 13-29

Category Milling Machines STANKOIMPORT ›
Manufacturer STANKOIMPORT ›

ARCHIVED AD
Vertical Milling Machine STANKOIMPORT 6 Т 13-29 was manufactured by the machine manufacturer STANKOIMPORT. Machine STANKOIMPORT 6 Т 13-29 was built in 1992 year.

General data

Location Ukraine
region Житомирська область
Year of manufacture 1992
Warranty Without warranty

Technical parameters

Length of the working table 63 in
Width of the working table 15.7 in
Maximum table load (evenly distributed) 1388.9 lb
Power of the spindle drive 14.7 hp
Number of rotary speeds of the spindle 18 pcs
Minimum rotary speed of the spindle 31.5 1/min
Maximum rotary speed of the spindle 1600 1/min
Minimum distance of the spindle from the table 2.8 in
Maximum distance of the spindle from the table 19.7 in
Throat depth (distance of the spindle axis from the frame) 16.5 in
Travel length X-axis (mechanical feed) 39.4 in
Travel length Y-axis (mechanical feed) 13.4 in
Travel length Z-axis (mechanical feed) 16.9 in
Number of feed rates 22 pcs
Maximum feed rate in X-axis 2.6 in/s
Maximum feed rate in Y-axis 2.6 in/s
Maximum feed rate in Z-axis 0.872703 in/s
Number of T-slots in the table 3 pcs
Machine height 95.7 in
Machine length 101.2 in
Machine width 88.7 in
Machine weight 4.7 short ton

Equipment

no data
‹ previous STANKOIMPORT 6 Р 83 Г STANKOIMPORT 6 Р 83 Ш STANKOIMPORT 6 Т 13-29 STANKOIMPORT 6 Т 13-29 STANKOIMPORT 6 Т 80 Ш next ›