Universal Milling Machine TOS Olomouc FGU-32

Category Milling Machines TOS Olomouc ›
Manufacturer TOS Olomouc ›

ARCHIVED AD
Universal Milling Machine TOS Olomouc FGU-32 was manufactured by the machine manufacturer TOS Olomouc. Machine TOS Olomouc FGU-32 was built in 1989 year.

General data

Location Poland
region Dolnośląskie
Year of manufacture 1989
Warranty Without warranty
Technical condition Very good
Payment Before receipt
Transport The buyer organizes the transport at his own cost

Technical parameters

Length of the working table 49.2 in
Width of the working table 12.6 in
Maximum table load (evenly distributed) 661.4 lb
Power of the spindle drive 7.4 hp
Number of rotary speeds of the vertical spindle 12 pcs
Maximum rotary speed of the vertical spindle 2000 1/min
Maximum distance of the spindle from the table 16.5 in
Travel length X-axis (mechanical feed) 33.5 in
Travel length Y-axis (mechanical feed) 16.5 in
Travel length Z-axis (mechanical feed) 10.8 in
Number of feed rates 13 pcs
Maximum feed rate in X-axis 0.590551 in/s
Maximum feed rate in Y-axis 0.164042 in/s
Maximum feed rate in Z-axis 0.590551 in/s
Total power demand 9.1 hp
Minimum feed rate in X-axis 0.00918635 in/s
Minimum feed rate in Y-axis 0.00262467 in/s
Minimum feed rate in Z-axis 0.00918635 in/s
Number of T-slots in the table 4 pcs
Machine height 66.9 in
Machine length 98.4 in
Machine width 59.1 in
Machine weight 2.9 short ton

Equipment

Lighting
‹ previous TMP VORONEZH K274A --- X8126B TOS Olomouc FGU-32 SV METAL PNB-2E LANDIS 3SE next ›