TOS
Year of manufacture : 2006
CNC control model : MEFI CNC 859
Diameter of the table : 30.7 in
Maximum turning diameter : 41.3 in
Maximum height of the workpiece : 24.8 in
CNC control model : MEFI CNC 859
Diameter of the table : 30.7 in
Maximum turning diameter : 41.3 in
Maximum height of the workpiece : 24.8 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2017
Diameter of the table : 31.5 in
Maximum height of the workpiece : 24.8 in
Maximum table load : 2.8 short ton
Maximum table rotary speed : 400 1/min
Diameter of the table : 31.5 in
Maximum height of the workpiece : 24.8 in
Maximum table load : 2.8 short ton
Maximum table rotary speed : 400 1/min
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2016
Length of the working table : 44.1 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
Power of the spindle drive : 10.1 hp
Length of the working table : 44.1 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
Power of the spindle drive : 10.1 hp
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2007
Length of the working table : 49.2 in
Width of the working table : 39.4 in
Travel length X-axis (mechanical feed) : 78.7 in
Travel length Y-axis (mechanical feed) : 51.2 in
Length of the working table : 49.2 in
Width of the working table : 39.4 in
Travel length X-axis (mechanical feed) : 78.7 in
Travel length Y-axis (mechanical feed) : 51.2 in
Czech Republic
Year of manufacture : 2016
Spindle bore : 3.9 in
Length of the working table : 44.1 in
Width of the working table : 39.4 in
Maximum rotary speed of the spindle : 1250 1/min
Spindle bore : 3.9 in
Length of the working table : 44.1 in
Width of the working table : 39.4 in
Maximum rotary speed of the spindle : 1250 1/min
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2013
CNC control model : Heidenhain iTNC 530
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
CNC control model : Heidenhain iTNC 530
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2011
Maximum length of the turning : 59.1 in
Maximum turning diameter : 19.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 10.6 in
Maximum length of the turning : 59.1 in
Maximum turning diameter : 19.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 10.6 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2012
Maximum length of the turning : 118.1 in
Maximum turning diameter : 34.3 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 20.5 in
Maximum length of the turning : 118.1 in
Maximum turning diameter : 34.3 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 20.5 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2006
CNC control model : HeidenHain iTNC 530
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
Travel length X-axis (mechanical feed) : 137.8 in
CNC control model : HeidenHain iTNC 530
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
Travel length X-axis (mechanical feed) : 137.8 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2008
CNC control model : HEIDENHAIN TNC 530
Spindle bore : 5 in
Length of the working table : 98 in
Width of the working table : 72 in
CNC control model : HEIDENHAIN TNC 530
Spindle bore : 5 in
Length of the working table : 98 in
Width of the working table : 72 in
United States
Michigan
Michigan
Year of manufacture : 2007
CNC control model : SINUMERIC 840D
Maximal module : 0.314961 in
Minimal module : 0.0393701 in
Maximum diameter of the gear wheel (external gear wheel) : 19.7 in
CNC control model : SINUMERIC 840D
Maximal module : 0.314961 in
Minimal module : 0.0393701 in
Maximum diameter of the gear wheel (external gear wheel) : 19.7 in
Poland
Year of manufacture : 2010
Maximal module : 0.314961 in
Minimal module : 0.0393701 in
Maximum diameter of the gear wheel (external gear wheel) : 19.7 in
Smooth adjustment of the speed of the slider
Maximal module : 0.314961 in
Minimal module : 0.0393701 in
Maximum diameter of the gear wheel (external gear wheel) : 19.7 in
Smooth adjustment of the speed of the slider
Poland
Year of manufacture : 2013
CNC control model : Siemens 840 Dsl
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
CNC control model : Siemens 840 Dsl
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Poland
Year of manufacture : 2016
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
347674 USD
Italy
Year of manufacture : 2012
Spindle bore : 5.9 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 55115.6 lb
Spindle bore : 5.9 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 55115.6 lb
366279 USD
Italy
Year of manufacture : 2014
Spindle bore : 5.1 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 55115.6 lb
Spindle bore : 5.1 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 55115.6 lb
Italy
Year of manufacture : 2017
Spindle bore : 5.1 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 55115.6 lb
Spindle bore : 5.1 in
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 55115.6 lb
250000 USD
Italy
Year of manufacture : 2008
CNC control model : Heidenhain
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 70.9 in
CNC control model : Heidenhain
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 70.9 in
266279 USD
Italy
Year of manufacture : 2016
Spindle bore : 5.1 in
Width of the working table : 78.7 in
Maximum table load (evenly distributed) : 44092.5 lb
Maximum boring depth : 31.5 in
Spindle bore : 5.1 in
Width of the working table : 78.7 in
Maximum table load (evenly distributed) : 44092.5 lb
Maximum boring depth : 31.5 in
Italy
Year of manufacture : 2013
CNC control model : Heidenhain
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
CNC control model : Heidenhain
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Italy
Year of manufacture : 2009
Spindle bore : 5.9 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 35.3 lb
Spindle bore : 5.9 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 35.3 lb
284884 USD
Italy
Year of manufacture : 2010
CNC control model : Heidenhain 430
Spindle bore : 5.1 in
Length of the working table : 78.7 in
Width of the working table : 78.7 in
CNC control model : Heidenhain 430
Spindle bore : 5.1 in
Length of the working table : 78.7 in
Width of the working table : 78.7 in
Italy
Year of manufacture : 2008
CNC control model : CNC
Spindle bore : 4.3 in
Length of the working table : 51.2 in
Width of the working table : 47.2 in
CNC control model : CNC
Spindle bore : 4.3 in
Length of the working table : 51.2 in
Width of the working table : 47.2 in
75581 USD
Italy
Year of manufacture : 2009
CNC control model : cnc
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
CNC control model : cnc
Spindle bore : 5.1 in
Length of the working table : 86.6 in
Width of the working table : 70.9 in
231395 USD
Italy
Year of manufacture : 2012
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 86.6 in
Maximum table load (evenly distributed) : 26455.5 lb
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 86.6 in
Maximum table load (evenly distributed) : 26455.5 lb
Italy
Year of manufacture : 2014
CNC control model : CNC
Spindle bore : 5.1 in
Length of the working table : 63 in
Width of the working table : 70.9 in
CNC control model : CNC
Spindle bore : 5.1 in
Length of the working table : 63 in
Width of the working table : 70.9 in
Italy
Year of manufacture : 2013
CNC control model : SIEMENS SINUMERIK 840 D
Diameter of the table : 46.5 in
Maximum turning diameter : 53.1 in
Maximum height of the workpiece : 35.4 in
CNC control model : SIEMENS SINUMERIK 840 D
Diameter of the table : 46.5 in
Maximum turning diameter : 53.1 in
Maximum height of the workpiece : 35.4 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2010
CNC control model : HEIDENHAIN iTNC 530
Spindle bore : 4.4 in
Length of the working table : 49.2 in
Width of the working table : 55.1 in
CNC control model : HEIDENHAIN iTNC 530
Spindle bore : 4.4 in
Length of the working table : 49.2 in
Width of the working table : 55.1 in
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2008
CNC control model : HEIDENHAIN CNC CONTROL
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Travel length X-axis (mechanical feed) : 137.8 in
CNC control model : HEIDENHAIN CNC CONTROL
Length of the working table : 98.4 in
Width of the working table : 70.9 in
Travel length X-axis (mechanical feed) : 137.8 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Lathes TOS
Lathes TOS SK 12 [6]Lathes TOS SUS 63 [2]
CNC Lathes and Turning Centers TOS
CNC Lathes and Turning Centers TOS SKJ-8 [2]CNC Lathes and Turning Centers TOS SKIQ 20 B CNC [1]
Milling Machines TOS
Milling Machines TOS FO 10 [6]Milling Machines TOS FO 16 [4]
CNC Milling Machines and Machining Centers TOS
CNC Milling Machines and Machining Centers TOS FGS 40 [1]CNC Milling Machines and Machining Centers TOS FGS 40 CN [1]
Drilling Machines TOS
Drilling Machines TOS VO80 [1]Drilling Machines TOS WHN 13 CNC [1]
Grinding Machines TOS
Grinding Machines TOS BHU 32 [3]Grinding Machines TOS BRH 20 A [2]
Boring Machines TOS
Boring Machines TOS WH 10 NC [9]Boring Machines TOS 130 cnc [6]
Slotting Machines TOS
Slotting Machines TOS OH 6 [4]Slotting Machines TOS OHO 50 [3]
Planing Machines TOS
Planing Machines TOS HJ8A [1]Planing Machines TOS OHA 16 B [1]
Sheet Metal Lines TOS
Sheet Metal Lines TOS TAU 50 [1]
