TOS
Year of manufacture : 2004
Maximum length of the turning : 393.7 in
Turning diameter over cross slide (max) : 41.3 in
Spindle bore : 4.8 in
Workpiece weight between centers (max) : 8.8 short ton
Maximum length of the turning : 393.7 in
Turning diameter over cross slide (max) : 41.3 in
Spindle bore : 4.8 in
Workpiece weight between centers (max) : 8.8 short ton
Netherlands
Gelderland
Gelderland
Year of manufacture : 2011
Maximum length of the turning : 59.1 in
Maximum turning diameter : 19.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 10.6 in
Maximum length of the turning : 59.1 in
Maximum turning diameter : 19.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 10.6 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1992
CNC control model : HeidenHain TNC 355
Length of the working table : 70.9 in
Width of the working table : 63 in
Maximum table load (evenly distributed) : 26455.5 lb
CNC control model : HeidenHain TNC 355
Length of the working table : 70.9 in
Width of the working table : 63 in
Maximum table load (evenly distributed) : 26455.5 lb
Netherlands
Gelderland
Gelderland
Year of manufacture : 2000
CNC control model : HeidenHain TNC 426
Length of the working table : 44.1 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
CNC control model : HeidenHain TNC 426
Length of the working table : 44.1 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
Netherlands
Gelderland
Gelderland
Year of manufacture : 2012
Maximum length of the turning : 118.1 in
Maximum turning diameter : 34.3 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 20.5 in
Maximum length of the turning : 118.1 in
Maximum turning diameter : 34.3 in
Turning diameter over bed (max) : 31.5 in
Turning diameter over cross slide (max) : 20.5 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1992
CNC control model : HeidenHain TNC 355
Maximum boring diameter : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 63 in
CNC control model : HeidenHain TNC 355
Maximum boring diameter : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 63 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2006
CNC control model : HeidenHain iTNC 530
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
Travel length X-axis (mechanical feed) : 137.8 in
CNC control model : HeidenHain iTNC 530
Width of the working table : 70.9 in
Maximum table load (evenly distributed) : 26455.5 lb
Travel length X-axis (mechanical feed) : 137.8 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1994
Length of the working table : 55.1 in
Width of the working table : 15.7 in
Maximum rotary speed of the vertical spindle : 1800 1/min
Travel length X-axis (mechanical feed) : 39.4 in
Length of the working table : 55.1 in
Width of the working table : 15.7 in
Maximum rotary speed of the vertical spindle : 1800 1/min
Travel length X-axis (mechanical feed) : 39.4 in
Netherlands
Friesland
Friesland
Year of manufacture : 1981
Spindle bore : 2.5 in
Length of the working table : 34.6 in
Width of the working table : 31.5 in
Travel length X-axis (mechanical feed) : 39.4 in
Spindle bore : 2.5 in
Length of the working table : 34.6 in
Width of the working table : 31.5 in
Travel length X-axis (mechanical feed) : 39.4 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1996
CNC control model : HEIDENHAIN TNC 360
Spindle bore : 5.1 in
Length of the working table : 63 in
Width of the working table : 70.9 in
CNC control model : HEIDENHAIN TNC 360
Spindle bore : 5.1 in
Length of the working table : 63 in
Width of the working table : 70.9 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1987
Maximum length of the turning : 78.7 in
Turning diameter over bed (max) : 24.8 in
Turning diameter over cross slide (max) : 15.7 in
Spindle bore : 3.1 in
Maximum length of the turning : 78.7 in
Turning diameter over bed (max) : 24.8 in
Turning diameter over cross slide (max) : 15.7 in
Spindle bore : 3.1 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1999
CNC control model : FAGAR 8050
Maximum turning length (Z-axis) : 157.5 in
Turning diameter over bed (max) : 49.2 in
Turning diameter over cross slide (max) : 37 in
CNC control model : FAGAR 8050
Maximum turning length (Z-axis) : 157.5 in
Turning diameter over bed (max) : 49.2 in
Turning diameter over cross slide (max) : 37 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1991
Maximum drilling diameter in steel : 2 in
Maximum reach (maximum distance of the spindle axis from the column) : 59.1 in
Maximum drilling diameter in steel : 2 in
Maximum reach (maximum distance of the spindle axis from the column) : 59.1 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1986
Maximum length of the turning : 78.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 8.7 in
Spindle bore : 2.2 in
Maximum length of the turning : 78.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 8.7 in
Spindle bore : 2.2 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1979
Maximum length of the turning : 59.1 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 12.6 in
Spindle bore : 3.1 in
Maximum length of the turning : 59.1 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 12.6 in
Spindle bore : 3.1 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1987
Length of the working table : 70.9 in
Width of the working table : 24.8 in
Power of the spindle drive : 20.1 hp
Minimum rotary speed of the vertical spindle : 45 1/min
Length of the working table : 70.9 in
Width of the working table : 24.8 in
Power of the spindle drive : 20.1 hp
Minimum rotary speed of the vertical spindle : 45 1/min
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1987
Maximum length of the grinding (shaft) : 59.1 in
Maximum diameter of the grinding (shaft) : 12.6 in
Power of the workpiece spindle drive : 21.4 hp
Machine height : 65.7 in
Maximum length of the grinding (shaft) : 59.1 in
Maximum diameter of the grinding (shaft) : 12.6 in
Power of the workpiece spindle drive : 21.4 hp
Machine height : 65.7 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1994
CNC control model : HEIDENHAIN CNC CONTROL
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 24.8 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : HEIDENHAIN CNC CONTROL
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 24.8 in
Turning diameter over cross slide (max) : 13.8 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1986
CNC control model : HEIDENHAIN POSITIP 850
Spindle bore : 3.9 in
Length of the working table : 49.2 in
Width of the working table : 49.2 in
CNC control model : HEIDENHAIN POSITIP 850
Spindle bore : 3.9 in
Length of the working table : 49.2 in
Width of the working table : 49.2 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1983
Maximum length of the turning : 78.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 8.7 in
Turning diameter in gap : 23.6 in
Maximum length of the turning : 78.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 8.7 in
Turning diameter in gap : 23.6 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1984
Length of the working table : 54.1 in
Width of the working table : 11.8 in
Power of the spindle drive : 5.4 hp
Minimum rotary speed of the vertical spindle : 45 1/min
Length of the working table : 54.1 in
Width of the working table : 11.8 in
Power of the spindle drive : 5.4 hp
Minimum rotary speed of the vertical spindle : 45 1/min
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1984
CNC control model : HEIDENHAIN CNC CONTROL
Length of the working table : 27.6 in
Width of the working table : 15.7 in
Minimum rotary speed of the vertical spindle : 10 1/min
CNC control model : HEIDENHAIN CNC CONTROL
Length of the working table : 27.6 in
Width of the working table : 15.7 in
Minimum rotary speed of the vertical spindle : 10 1/min
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1992
CNC control model : HEIDENHAIN iTNC 530
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 86.6 in
CNC control model : HEIDENHAIN iTNC 530
Spindle bore : 5.1 in
Length of the working table : 70.9 in
Width of the working table : 86.6 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1991
CNC control model : HEIDENHAIN iTNC 530
Length of the working table : 70.9 in
Width of the working table : 78.7 in
Power of the spindle drive : 42.9 hp
CNC control model : HEIDENHAIN iTNC 530
Length of the working table : 70.9 in
Width of the working table : 78.7 in
Power of the spindle drive : 42.9 hp
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 2001
CNC control model : Heidenhain Manuel Plus
Turning diameter over bed (max) : 41.3 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 157.5 in
CNC control model : Heidenhain Manuel Plus
Turning diameter over bed (max) : 41.3 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 157.5 in
Netherlands
Gelderland
Gelderland
Lathes TOS
Lathes TOS SK 12 [6]Lathes TOS SUS 63 [2]
CNC Lathes and Turning Centers TOS
CNC Lathes and Turning Centers TOS SKJ-8 [2]CNC Lathes and Turning Centers TOS SKQ-12 NC [1]
Milling Machines TOS
Milling Machines TOS FO 10 [6]Milling Machines TOS FO 16 [4]
CNC Milling Machines and Machining Centers TOS
CNC Milling Machines and Machining Centers TOS KURIM FGSQ 63 [1]CNC Milling Machines and Machining Centers TOS MCFHD 80 [1]
Drilling Machines TOS
Drilling Machines TOS VO80 [1]Drilling Machines TOS VO-50 [1]
Grinding Machines TOS
Grinding Machines TOS BHU 32 [3]Grinding Machines TOS BRH 20 A [2]
Boring Machines TOS
Boring Machines TOS WH 10 NC [9]Boring Machines TOS 130 cnc [6]
Slotting Machines TOS
Slotting Machines TOS OH 6 [4]Slotting Machines TOS OHO 50 [3]
Planing Machines TOS
Planing Machines TOS OHA 16 B [1]Planing Machines TOS HJ8A [1]
Sheet Metal Lines TOS
Sheet Metal Lines TOS TAU 50 [1]
