- UniMachines
- ›
- Milling Machines
- ›
- Toolroom Milling Machines
- ›
- Toolroom Milling Machines DECKEL
- ›
- Toolroom Milling Machines DECKEL FP 4 M
Toolroom Milling Machine DECKEL FP 4 M
Toolroom Milling Machine DECKEL FP 4 M was manufactured by the machine manufacturer DECKEL. Machine DECKEL FP 4 M was built in 1991 year.
General data | |
|---|---|
| Location | Italy |
| region | Brescia |
| Year of manufacture | 1991 |
| Warranty | Without warranty |
Technical parameters | |
|---|---|
| Length of the working table | 33.1 in |
| Width of the working table | 10.8 in |
| Maximum table load (evenly distributed) | 1322.8 lb |
| Minimum rotary speed of the vertical spindle | 1410 1/min |
| Maximum rotary speed of the vertical spindle | 2850 1/min |
| Maximum distance of the spindle from the table | 15.4 in |
| Travel length X-axis (mechanical feed) | 19.7 in |
| Travel length Y-axis (mechanical feed) | 15.7 in |
| Travel length Z-axis (mechanical feed) | 15.7 in |
| Total power demand | 12.7 hp |
| Machine length | 55.1 in |
| Machine width | 70.9 in |
| Machine weight | 1.6 short ton |
Equipment | |
|---|---|
| no data | |
