Technical parameters |
|---|
| Maximum force (pressing) |
33.1 short ton |
| Maximum thickness of the sheet metal |
0.314961 in |
| Maximum travel length X-axis |
101.7 in |
| Maximum travel length Y-axis |
51.9 in |
| Maximum length of the sheet metal (X) |
99.6 in |
| Maximum width of the sheet metal (Y) |
50 in |
| Maximum table load (evenly distributed) |
440.9 lb |
| Maximum punching speed (number of impacts per minute) |
1100 1/min |
| Maximum marking speed (number of impacts per minute) |
3000 1/min |
| Maximum tool diameter |
3.5 in |
| Tool change time (from magazine) |
3 s |
| Maximum feed rate in X-axis |
3543.3 in/min |
| Maximum feed rate in Y-axis |
2362.2 in/min |
| Number of clamps for gripping the sheet metal |
2 pcs |
| Oil tank capacity |
105.7 US gallon |
| Pressure in the hydraulic system |
4133.6 psi |
| Machine weight |
14.3 short ton |
