Machine categories
- Benders [9]
- Boring Machines [12]
- CNC Lathes and Turning Centers [123]
- CNC Milling Machines and Machining Centers [191]
- Compressors [3]
- Drilling Machines [17]
- Electrical Discharge Machines [3]
- Folding machines [7]
- Forklifts [11]
- Grinding Machines [10]
- Guillotine shears [27]
- Hydraulic Presses [9]
- Industrial Robots [1]
- Laboratory Machines [1]
- Lasers [6]
- Lathes [93]
- Mechanical Presses [8]
- Milling Machines [26]
- Plasma and Gas Cutting Machines [4]
- Plate Bending Machines [12]
- Press Brakes [61]
- Punching Machines for sheet metal [28]
- Saw Machines [53]
- Slotting Machines [2]
UniMachines - Marketplace for used machines / page 10
Year of manufacture : 1987
Maximum length of the turning : 19 in
Turning diameter over bed (max) : 7 in
3-jaw chuck
Cooling system
Maximum length of the turning : 19 in
Turning diameter over bed (max) : 7 in
3-jaw chuck
Cooling system
3667 USD
United Kingdom
Kent
Kent
Year of manufacture : 2004
Length of the working table : 60 in
Width of the working table : 12 in
Maximum table load (evenly distributed) : 2204.6 lb
Power of the spindle drive : 7.5 hp
Length of the working table : 60 in
Width of the working table : 12 in
Maximum table load (evenly distributed) : 2204.6 lb
Power of the spindle drive : 7.5 hp
16667 USD
United Kingdom
Kent
Kent
Year of manufacture : 1998
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 11.8 in
Maximum feed rate in X-axis : 984.3 in/min
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 11.8 in
Maximum feed rate in X-axis : 984.3 in/min
30000 USD
United Kingdom
Kent
Kent
Year of manufacture : 1998
Maximum length of the turning : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.6 in
Turning diameter in gap : 23 in
Maximum length of the turning : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.6 in
Turning diameter in gap : 23 in
17267 USD
United Kingdom
Kent
Kent
Year of manufacture : 1991
Length of the working table : 48 in
Width of the working table : 9.1 in
Power of the spindle drive : 14.7 hp
Minimum rotary speed of the spindle : 50 1/min
Length of the working table : 48 in
Width of the working table : 9.1 in
Power of the spindle drive : 14.7 hp
Minimum rotary speed of the spindle : 50 1/min
6600 USD
United Kingdom
Kent
Kent
Year of manufacture : 1994
CNC control model : HEIDENHAIN 2500
Length of the working table : 33.1 in
Width of the working table : 16.5 in
Maximum table load (evenly distributed) : 1102.3 lb
CNC control model : HEIDENHAIN 2500
Length of the working table : 33.1 in
Width of the working table : 16.5 in
Maximum table load (evenly distributed) : 1102.3 lb
19933 USD
United Kingdom
Kent
Kent
Year of manufacture : 2006
CNC control model : FANUC 21 iTB
Maximum turning length (Z-axis) : 21.3 in
Turning diameter over bed (max) : 20.1 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : FANUC 21 iTB
Maximum turning length (Z-axis) : 21.3 in
Turning diameter over bed (max) : 20.1 in
Maximum feed rate in X-axis : 1181.1 in/min
39933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1998
Maximum length of the turning : 39.4 in
Turning diameter over bed (max) : 13 in
Turning diameter over cross slide (max) : 8.3 in
Spindle bore : 1.6 in
Maximum length of the turning : 39.4 in
Turning diameter over bed (max) : 13 in
Turning diameter over cross slide (max) : 8.3 in
Spindle bore : 1.6 in
13267 USD
United Kingdom
Kent
Kent
Year of manufacture : 1998
Maximum length of the turning : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.6 in
Turning diameter in gap : 23 in
Maximum length of the turning : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.6 in
Turning diameter in gap : 23 in
17267 USD
United Kingdom
Kent
Kent
Year of manufacture : 1996
CNC control model : HEIDENHAIN 360 CNC
Length of the working table : 44.1 in
Width of the working table : 20.1 in
Power of the spindle drive : 14.7 hp
CNC control model : HEIDENHAIN 360 CNC
Length of the working table : 44.1 in
Width of the working table : 20.1 in
Power of the spindle drive : 14.7 hp
16667 USD
United Kingdom
Kent
Kent
Year of manufacture : 1999
CNC control model : MITSUBISHI KWS 960 MAGIC
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 18.9 in
Maximum power of the main spindle : 14.7 hp
CNC control model : MITSUBISHI KWS 960 MAGIC
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 18.9 in
Maximum power of the main spindle : 14.7 hp
15933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1997
CNC control model : FANUC CNC CONTROL
Turning diameter over bed (max) : 13 in
Diameter of the spindle bore : 1.6 in
CNC control model : FANUC CNC CONTROL
Turning diameter over bed (max) : 13 in
Diameter of the spindle bore : 1.6 in
13267 USD
United Kingdom
Kent
Kent
Year of manufacture : 2000
Maximum shaft diameter (cut at 90 degree) : 18.1 in
Minimum speed of the bandsaw blade : 0 ft/min
Maximum speed of the bandsaw blade : 0 ft/min
Machine weight : 2.9 short ton
Maximum shaft diameter (cut at 90 degree) : 18.1 in
Minimum speed of the bandsaw blade : 0 ft/min
Maximum speed of the bandsaw blade : 0 ft/min
Machine weight : 2.9 short ton
10000 USD
United Kingdom
Kent
Kent
Year of manufacture : 1974
Length of the working table : 41.9 in
Width of the working table : 9.1 in
Power of the spindle drive : 14.7 hp
Minimum rotary speed of the spindle : 50 1/min
Length of the working table : 41.9 in
Width of the working table : 9.1 in
Power of the spindle drive : 14.7 hp
Minimum rotary speed of the spindle : 50 1/min
3933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1995
Maximum length of the turning : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.7 in
Turning diameter in gap : 23 in
Maximum length of the turning : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.7 in
Turning diameter in gap : 23 in
10000 USD
United Kingdom
Kent
Kent
Year of manufacture : 2007
CNC control model : FANUC 21 iTB
Maximum turning length (Z-axis) : 21.3 in
Turning diameter over bed (max) : 20.1 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : FANUC 21 iTB
Maximum turning length (Z-axis) : 21.3 in
Turning diameter over bed (max) : 20.1 in
Maximum feed rate in X-axis : 1181.1 in/min
43333 USD
United Kingdom
Kent
Kent
Year of manufacture : 1980
Maximum length of the turning : 25 in
Turning diameter over bed (max) : 13 in
Turning diameter over cross slide (max) : 8.2 in
Turning diameter in gap : 19 in
Maximum length of the turning : 25 in
Turning diameter over bed (max) : 13 in
Turning diameter over cross slide (max) : 8.2 in
Turning diameter in gap : 19 in
3933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1985
Length of the working table : 39.4 in
Width of the working table : 8.9 in
Power of the spindle drive : 2 hp
Minimum rotary speed of the vertical spindle : 75 1/min
Length of the working table : 39.4 in
Width of the working table : 8.9 in
Power of the spindle drive : 2 hp
Minimum rotary speed of the vertical spindle : 75 1/min
3933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1998
CNC control model : FANUC 210i TA
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.6 in
CNC control model : FANUC 210i TA
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.6 in
21267 USD
United Kingdom
Kent
Kent
Year of manufacture : 1988
CNC control model : FANUC OTA
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 15.4 in
Turning diameter over cross slide (max) : 9.4 in
CNC control model : FANUC OTA
Maximum turning length (Z-axis) : 49.2 in
Turning diameter over bed (max) : 15.4 in
Turning diameter over cross slide (max) : 9.4 in
6600 USD
United Kingdom
Kent
Kent
Year of manufacture : 1989
Length of the working table : 43.3 in
Width of the working table : 9.4 in
Power of the spindle drive : 4 hp
Minimum rotary speed of the vertical spindle : 48 1/min
Length of the working table : 43.3 in
Width of the working table : 9.4 in
Power of the spindle drive : 4 hp
Minimum rotary speed of the vertical spindle : 48 1/min
3933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1998
CNC control model : HEIDENHAIN 426
Length of the working table : 45.3 in
Width of the working table : 19.3 in
Maximum table load (evenly distributed) : 1984.2 lb
CNC control model : HEIDENHAIN 426
Length of the working table : 45.3 in
Width of the working table : 19.3 in
Maximum table load (evenly distributed) : 1984.2 lb
30000 USD
United Kingdom
Kent
Kent
Year of manufacture : 2005
CNC control model : FANUC 21 iTB
Maximum turning length (Z-axis) : 21.3 in
Turning diameter over bed (max) : 20.1 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : FANUC 21 iTB
Maximum turning length (Z-axis) : 21.3 in
Turning diameter over bed (max) : 20.1 in
Maximum feed rate in X-axis : 1181.1 in/min
39333 USD
United Kingdom
Kent
Kent
Year of manufacture : 1999
CNC control model : HAAS CNC CONTROL
Length of the working table : 26 in
Width of the working table : 14 in
Power of the spindle drive : 20 hp
CNC control model : HAAS CNC CONTROL
Length of the working table : 26 in
Width of the working table : 14 in
Power of the spindle drive : 20 hp
19933 USD
United Kingdom
Kent
Kent
Year of manufacture : 1996
CNC control model : FANUC 21 TB
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 6.7 in
Maximum feed rate in X-axis : 590.6 in/min
CNC control model : FANUC 21 TB
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 6.7 in
Maximum feed rate in X-axis : 590.6 in/min
11945 USD
United Kingdom
Kent
Kent
Year of manufacture : 1997
Length of the working table : 49 in
Width of the working table : 9.1 in
Power of the spindle drive : 3 hp
Minimum rotary speed of the spindle : 70 1/min
Length of the working table : 49 in
Width of the working table : 9.1 in
Power of the spindle drive : 3 hp
Minimum rotary speed of the spindle : 70 1/min
4333 USD
United Kingdom
Kent
Kent
Year of manufacture : 2006
Length of the working table : 47.8 in
Width of the working table : 10.5 in
Maximum table load (evenly distributed) : 1000.9 lb
Power of the spindle drive : 7.5 hp
Length of the working table : 47.8 in
Width of the working table : 10.5 in
Maximum table load (evenly distributed) : 1000.9 lb
Power of the spindle drive : 7.5 hp
19933 USD
United Kingdom
Kent
Kent
Year of manufacture : 2001
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 78.7 in
Turning diameter over bed (max) : 21.8 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 78.7 in
Turning diameter over bed (max) : 21.8 in
Turning diameter over cross slide (max) : 14.6 in
36667 USD
United Kingdom
Kent
Kent
Year of manufacture : 1996
Maximum length of the turning : 39.4 in
Turning diameter over bed (max) : 21.8 in
Turning diameter over cross slide (max) : 14.6 in
Turning diameter in gap : 32.7 in
Maximum length of the turning : 39.4 in
Turning diameter over bed (max) : 21.8 in
Turning diameter over cross slide (max) : 14.6 in
Turning diameter in gap : 32.7 in
17267 USD
United Kingdom
Kent
Kent
Year of manufacture : 2003
CNC control model : FANUC 0 iTB
Maximum turning length (Z-axis) : 15 in
Turning diameter over bed (max) : 11.2 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : FANUC 0 iTB
Maximum turning length (Z-axis) : 15 in
Turning diameter over bed (max) : 11.2 in
Maximum feed rate in X-axis : 1181.1 in/min
25267 USD
United Kingdom
Kent
Kent
