OKUMA
Year of manufacture : 2013
CNC control model : OSP OSP-P300L-R
Maximum turning length (Z-axis) : 40.2 in
Turning diameter over bed (max) : 13.4 in
Maximum travel length in the X-axis : 9.3 in
CNC control model : OSP OSP-P300L-R
Maximum turning length (Z-axis) : 40.2 in
Turning diameter over bed (max) : 13.4 in
Maximum travel length in the X-axis : 9.3 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 2006
CNC control model : Fanuc
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 10.6 in
Diameter of the spindle bore : 2 in
CNC control model : Fanuc
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 10.6 in
Diameter of the spindle bore : 2 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2008
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum rotary speed of the spindle : 8000 1/min
Travel length X-axis (mechanical feed) : 22 in
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum rotary speed of the spindle : 8000 1/min
Travel length X-axis (mechanical feed) : 22 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2010
Length of the lathe : 318.9 in
Width of the lathe : 108.3 in
Height of the lathe : 82.7 in
Weight of the lathe : 14.3 short ton
Length of the lathe : 318.9 in
Width of the lathe : 108.3 in
Height of the lathe : 82.7 in
Weight of the lathe : 14.3 short ton
Netherlands
Gelderland
Gelderland
Year of manufacture : 2009
CNC control model : OSP-P200M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3306.9 lb
CNC control model : OSP-P200M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3306.9 lb
Netherlands
Gelderland
Gelderland
Year of manufacture : 2007
CNC control model : OSP-P200L
Maximum length of the turning : 41.9 in
Turning diameter over bed (max) : 18.5 in
Diameter of the spindle bore : 3.1 in
CNC control model : OSP-P200L
Maximum length of the turning : 41.9 in
Turning diameter over bed (max) : 18.5 in
Diameter of the spindle bore : 3.1 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2007
Diameter of the table : 31.5 in
Maximum turning diameter : 35.4 in
Maximum table rotary speed : 2000 1/min
Total power demand : 40.2 hp
Diameter of the table : 31.5 in
Maximum turning diameter : 35.4 in
Maximum table rotary speed : 2000 1/min
Total power demand : 40.2 hp
Netherlands
Gelderland
Gelderland
Year of manufacture : 2007
CNC control model : OSP-200
Maximum turning length (Z-axis) : 23.2 in
Maximum travel length in the X-axis : 11.4 in
Chip transporter
CNC control model : OSP-200
Maximum turning length (Z-axis) : 23.2 in
Maximum travel length in the X-axis : 11.4 in
Chip transporter
Netherlands
Gelderland
Gelderland
Year of manufacture : 2007
CNC control model : OSP-P200L
Diameter of the table : 8.3 in
Maximum turning diameter : 11 in
Maximum height of the workpiece : 8.3 in
CNC control model : OSP-P200L
Diameter of the table : 8.3 in
Maximum turning diameter : 11 in
Maximum height of the workpiece : 8.3 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2017
CNC control model : Okuma OSP-P300LA
Maximum turning length (Z-axis) : 10.2 in
Turning diameter over bed (max) : 22.8 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : Okuma OSP-P300LA
Maximum turning length (Z-axis) : 10.2 in
Turning diameter over bed (max) : 22.8 in
Maximum travel length in the X-axis : 10.2 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2009
CNC control model : OSP-P200M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2645.6 lb
CNC control model : OSP-P200M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2645.6 lb
Netherlands
Gelderland
Gelderland
Year of manufacture : 2012
CNC control model : CNC OSP-P300MA
Maximum table load (evenly distributed) : 2645.6 lb
Power of the spindle drive : 40.2 hp
Number of CNC controlled axles : 4 pcs
CNC control model : CNC OSP-P300MA
Maximum table load (evenly distributed) : 2645.6 lb
Power of the spindle drive : 40.2 hp
Number of CNC controlled axles : 4 pcs
147139 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2006
CNC control model : OKUMA OSP P 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : OKUMA OSP P 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Maximum table load (evenly distributed) : 2200 lb
United States
Illinois
Illinois
Year of manufacture : 2010
CNC control model : OSP P 200 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : OSP P 200 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
United States
Colorado
Colorado
Year of manufacture : 2009
CNC control model : OSP 100 M
Length of the working table : 48 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OSP 100 M
Length of the working table : 48 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Colorado
Colorado
Year of manufacture : 2012
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 35 in
Maximum turning diameter : 49.2 in
Maximum travel length in the X-axis : 33.1 in
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 35 in
Maximum turning diameter : 49.2 in
Maximum travel length in the X-axis : 33.1 in
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : OSP P 200 M
Length of the working table : 86.6 in
Width of the working table : 33.5 in
Number of tools in the magazine : 36 pcs
CNC control model : OSP P 200 M
Length of the working table : 86.6 in
Width of the working table : 33.5 in
Number of tools in the magazine : 36 pcs
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Colorado
Colorado
Year of manufacture : 2007
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 26 in
Maximum turning diameter : 24 in
Maximum feed rate in X-axis : 944 in/min
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 26 in
Maximum turning diameter : 24 in
Maximum feed rate in X-axis : 944 in/min
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : OKUMA P 2000 L
Maximum turning length (Z-axis) : 29.5 in
Turning diameter over cross slide (max) : 23.6 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : OKUMA P 2000 L
Maximum turning length (Z-axis) : 29.5 in
Turning diameter over cross slide (max) : 23.6 in
Maximum travel length in the X-axis : 19.7 in
United States
Colorado
Colorado
Year of manufacture : 2007
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
CNC control model : OKUMA OSP-P100
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 20.9 in
225000 USD
United States
California
California
Year of manufacture : 2009
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 37.2 in
Turning diameter over bed (max) : 24.8 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 37.2 in
Turning diameter over bed (max) : 24.8 in
Maximum travel length in the X-axis : 22.8 in
184000 USD
United States
California
California
Year of manufacture : 2010
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 2008
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.8 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.8 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 2012
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
United States
New York
New York
Year of manufacture : 2007
Length of the working table : 55.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 20 hp
Number of CNC controlled axles : 4 pcs
Length of the working table : 55.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 20 hp
Number of CNC controlled axles : 4 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 2006
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
United States
Arkansas
Arkansas
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
United States
Georgia
Georgia
Lathes OKUMA
Lathes OKUMA SIMULTURN LU-300MY [1]Lathes OKUMA LS 450x1250 [1]
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB 15 [4]CNC Lathes and Turning Centers OKUMA LT-25 [3]
Milling Machines OKUMA
Milling Machines OKUMA 5VS-NC [1]Milling Machines OKUMA 6VAE [1]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MC-V 4020 [6]CNC Milling Machines and Machining Centers OKUMA MX 45 VAE [4]
Grinding Machines OKUMA
Grinding Machines OKUMA GI-5 N [1]Grinding Machines OKUMA GP-26 T X 65 [1]
