OKUMA / page 5
Year of manufacture : 1993
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
Year of manufacture : 1996
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 36.2 in
Turning diameter over bed (max) : 19.3 in
Turning diameter over cross slide (max) : 16.9 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 36.2 in
Turning diameter over bed (max) : 19.3 in
Turning diameter over cross slide (max) : 16.9 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : OKUMA OSP-U 100 L
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP-U 100 L
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
Year of manufacture : 2007
CNC control model : OKUMA OSP P 200 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP P 200 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 5020 M
Length of the working table : 47.2 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 700 lb
CNC control model : OKUMA OSP 5020 M
Length of the working table : 47.2 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 700 lb
United States
Illinois
Illinois
Year of manufacture : 1989
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
8147 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2008
CNC control model : OSP 200 L CNC
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 28 in
Maximum travel length in the X-axis : 27.2 in
CNC control model : OSP 200 L CNC
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 28 in
Maximum travel length in the X-axis : 27.2 in
161512 USD
Germany
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15 in
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1999
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Maximum turning length (Z-axis) : 25.2 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
Maximum travel length in the X-axis : 6.7 in
Spain
Barcelona
Barcelona
Year of manufacture : 2007
CNC control model : OKUMA MF 46 VA
CNC control model : OKUMA MF 46 VA
44186 USD
Italy
Cuneo
Cuneo
Year of manufacture : 2006
CNC control model : OKUMA P200L
Maximum travel length in the Y-axis : 1.7 in
Number of spindles : 2 pcs
Diameter of the spindle bore : 2.6 in
CNC control model : OKUMA P200L
Maximum travel length in the Y-axis : 1.7 in
Number of spindles : 2 pcs
Diameter of the spindle bore : 2.6 in
Italy
Vicenza
Vicenza
Year of manufacture : 1983
CNC control model : OSP 500 G-G
Minimum diameter of the grinded hole : 0.11811 in
Maximum diameter of the grinded hole : 2 in
CNC control model : OSP 500 G-G
Minimum diameter of the grinded hole : 0.11811 in
Maximum diameter of the grinded hole : 2 in
Italy
Milano
Milano
Year of manufacture : 1997
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : FANUC 18
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 9.8 in
France
Rhône
Rhône
Year of manufacture : 2003
CNC control model : OSP U 100 M
Length of the working table : 29.9 in
Width of the working table : 18.1 in
Number of tools in the magazine : 20 pcs
CNC control model : OSP U 100 M
Length of the working table : 29.9 in
Width of the working table : 18.1 in
Number of tools in the magazine : 20 pcs
Italy
Year of manufacture : 1998
Number of tools in the magazine : 154 pcs
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 24 in
Number of tools in the magazine : 154 pcs
Maximum rotary speed of the spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 24 in
Italy
Year of manufacture : 1989
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 7.1 in
Diameter of the spindle bore : 1.7 in
Number of tool turrets : 2 pcs
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1980
Maximum turning length (Z-axis) : 49.2 in
Maximum travel length in the X-axis : 13.4 in
Maximum feed rate in X-axis : 236.2 in/min
Maximum feed rate in Z-axis : 0 ft/min
Maximum turning length (Z-axis) : 49.2 in
Maximum travel length in the X-axis : 13.4 in
Maximum feed rate in X-axis : 236.2 in/min
Maximum feed rate in Z-axis : 0 ft/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2000
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Number of tools in the magazine : 20 pcs
Minimum rotary speed of the vertical spindle : 50 1/min
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Number of tools in the magazine : 20 pcs
Minimum rotary speed of the vertical spindle : 50 1/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1997
CNC control model : OKUMA OSP U 10 N
Length of the working table : 39.4 in
Width of the working table : 16.9 in
Maximum table load (evenly distributed) : 1322.8 lb
CNC control model : OKUMA OSP U 10 N
Length of the working table : 39.4 in
Width of the working table : 16.9 in
Maximum table load (evenly distributed) : 1322.8 lb
Germany
Baden-Württemberg
Baden-Württemberg
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LT10M [2]CNC Lathes and Turning Centers OKUMA ES-L 6 [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MC-40 VA [2]CNC Milling Machines and Machining Centers OKUMA MA-650 VB [2]
