OKUMA / page 5
Year of manufacture : 2013
CNC control model : OKUMA OSP- P 300 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKUMA OSP- P 300 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
Ohio
Ohio
Year of manufacture : 2003
CNC control model : OKUMA OSPE 100 M
Length of the working table : 30 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKUMA OSPE 100 M
Length of the working table : 30 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 880 lb
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Ohio
Ohio
Year of manufacture : 2002
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 28 in
Turning diameter over cross slide (max) : 18.9 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 28 in
Turning diameter over cross slide (max) : 18.9 in
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 17.7 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 17.7 in
Maximum travel length in the X-axis : 22.8 in
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Ohio
Ohio
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
United States
Illinois
Illinois
Year of manufacture : 2000
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1990
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
United States
Illinois
Illinois
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 19.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 19.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 14.6 in
United States
Illinois
Illinois
Year of manufacture : 1988
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
United States
Illinois
Illinois
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1993
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
Year of manufacture : 1996
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 36.2 in
Turning diameter over bed (max) : 19.3 in
Turning diameter over cross slide (max) : 16.9 in
CNC control model : OKUMA OSP 7000 L
Maximum turning length (Z-axis) : 36.2 in
Turning diameter over bed (max) : 19.3 in
Turning diameter over cross slide (max) : 16.9 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 11.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : OKUMA OSP-U 100 L
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP-U 100 L
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
Year of manufacture : 2007
CNC control model : OKUMA OSP P 200 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP P 200 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 5020 M
Length of the working table : 47.2 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 700 lb
CNC control model : OKUMA OSP 5020 M
Length of the working table : 47.2 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 700 lb
United States
Illinois
Illinois
Year of manufacture : 2013
CNC control model : OSP OSP-P300L-R
Maximum turning length (Z-axis) : 40.2 in
Turning diameter over bed (max) : 13.4 in
Maximum travel length in the X-axis : 9.3 in
CNC control model : OSP OSP-P300L-R
Maximum turning length (Z-axis) : 40.2 in
Turning diameter over bed (max) : 13.4 in
Maximum travel length in the X-axis : 9.3 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 2012
Digital readouts
Inverter controls the spindle speed
Hardened guideways
Removable gap
Digital readouts
Inverter controls the spindle speed
Hardened guideways
Removable gap
29467 USD
United Kingdom
Year of manufacture : 2014
CNC control model : FANUC 0i 0i
Diameter of the table : 118.1 in
Maximum turning diameter : 147.6 in
Maximum height of the workpiece : 63 in
CNC control model : FANUC 0i 0i
Diameter of the table : 118.1 in
Maximum turning diameter : 147.6 in
Maximum height of the workpiece : 63 in
988372 USD
Poland
Mazowieckie
Mazowieckie
Year of manufacture : 2014
CNC control model : OKUMA OSP-P300L
Maximum turning length (Z-axis) : 20.1 in
Maximum travel length in the X-axis : 10.2 in
Maximum travel length in the Y-axis : 4.7 in
CNC control model : OKUMA OSP-P300L
Maximum turning length (Z-axis) : 20.1 in
Maximum travel length in the X-axis : 10.2 in
Maximum travel length in the Y-axis : 4.7 in
87193 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2016
CNC control model : OKUMA OSP-P300M-R
Length of the working table : 39.4 in
Width of the working table : 18.1 in
Number of tools in the magazine : 32 pcs
CNC control model : OKUMA OSP-P300M-R
Length of the working table : 39.4 in
Width of the working table : 18.1 in
Number of tools in the magazine : 32 pcs
98093 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1989
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
CNC control model : OSP 5000L CNC System
Maximum turning length (Z-axis) : 19.7 in
Maximum travel length in the X-axis : 15.7 in
Minimum rotary speed of the main spindle : 70 rpm
8147 USD
Poland
Dolnośląskie
Dolnośląskie
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB-15 [2]CNC Lathes and Turning Centers OKUMA LT10M [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MA-600 HB Space Center [2]CNC Milling Machines and Machining Centers OKUMA MA-550 VB [2]
