OKUMA / page 4
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 G
Maximum length of the grinding (shaft) : 25.6 in
Maximum diameter of the grinding (shaft) : 13 in
Maximum weight of the shaft between the centers : 110 lb
CNC control model : OKUMA OSP 700 G
Maximum length of the grinding (shaft) : 25.6 in
Maximum diameter of the grinding (shaft) : 13 in
Maximum weight of the shaft between the centers : 110 lb
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : OKUMA OSP 700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : OKUMA OSP-700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP-700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
Number of spindles : 2 pcs
CNC control model : OKUMA OSP U 100
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
Number of spindles : 2 pcs
United States
Michigan
Michigan
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 15.8 in
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
Michigan
Michigan
Year of manufacture : 2001
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
United States
Michigan
Michigan
Year of manufacture : 2004
CNC control model : OKUMA OSP-E 100 M-H
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2600 lb
CNC control model : OKUMA OSP-E 100 M-H
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2600 lb
United States
Michigan
Michigan
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 35.4 in
Maximum turning diameter : 17.7 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 35.4 in
Maximum turning diameter : 17.7 in
Maximum travel length in the X-axis : 22.8 in
United States
Michigan
Michigan
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
United States
Michigan
Michigan
Year of manufacture : 2003
CNC control model : OKUMA U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Michigan
Michigan
Year of manufacture : 2002
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Ohio
Ohio
Year of manufacture : 1998
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
Ohio
Ohio
Year of manufacture : 2003
CNC control model : OKUMA OSPE 100 M
Length of the working table : 30 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKUMA OSPE 100 M
Length of the working table : 30 in
Width of the working table : 18.1 in
Maximum table load (evenly distributed) : 880 lb
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Ohio
Ohio
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 28 in
Turning diameter over cross slide (max) : 18.9 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 28 in
Turning diameter over cross slide (max) : 18.9 in
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 17.7 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 17.7 in
Maximum travel length in the X-axis : 22.8 in
United States
Ohio
Ohio
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 40 in
Width of the working table : 20 in
Power of the spindle drive : 7.5 hp
United States
Illinois
Illinois
Year of manufacture : 2000
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1990
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
CNC control model : OKUMA OSP 3000
Maximum power of the main spindle : 50 hp
Minimum rotary speed of the main spindle : 10 rpm
Maximum rotary speed of the main spindle : 1000 rpm
United States
Illinois
Illinois
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 19.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 19.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 14.6 in
United States
Illinois
Illinois
Year of manufacture : 1988
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 20 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 10 in
United States
Illinois
Illinois
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.5 in
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 10.6 in
United States
Illinois
Illinois
Year of manufacture : 1993
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP 5000 M
Length of the working table : 60 in
Width of the working table : 25 in
Power of the spindle drive : 30 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 22.8 in
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020
Maximum turning length (Z-axis) : 16.3 in
Turning diameter over bed (max) : 15 in
Turning diameter over cross slide (max) : 14.2 in
United States
Illinois
Illinois
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LC 20 [2]CNC Lathes and Turning Centers OKUMA LB 15 II [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MX-45 VAE [3]CNC Milling Machines and Machining Centers OKUMA MX-50 HB [3]
