OKUMA / page 4
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 2011
CNC control model : FANUC 31-A
Diameter of the table : 35.8 in
Maximum turning diameter : 31.5 in
Minimum table rotary speed : 13 rpm
CNC control model : FANUC 31-A
Diameter of the table : 35.8 in
Maximum turning diameter : 31.5 in
Minimum table rotary speed : 13 rpm
United States
Florida
Florida
Year of manufacture : 2011
CNC control model : OKUMA OSP P 200 LA
Maximum turning length (Z-axis) : 26 in
Maximum turning diameter : 24 in
Maximum feed rate in X-axis : 945 in/min
CNC control model : OKUMA OSP P 200 LA
Maximum turning length (Z-axis) : 26 in
Maximum turning diameter : 24 in
Maximum feed rate in X-axis : 945 in/min
United States
New York
New York
Year of manufacture : 2008
CNC control model : OKUMA 200 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.8 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OKUMA 200 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.8 in
Turning diameter over cross slide (max) : 16.5 in
United States
New York
New York
Year of manufacture : 2004
CNC control model : OKUMA OSP U100M-H
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2600 lb
CNC control model : OKUMA OSP U100M-H
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2600 lb
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : OKUMA OSP-700 L
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 10.6 in
CNC control model : OKUMA OSP-700 L
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 10.6 in
United States
Michigan
Michigan
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP U 100 L
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Michigan
Michigan
Year of manufacture : 1992
CNC control model : OKUMA OSP-5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP-5000 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 15.7 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 1991
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 25.5 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.7 in
CNC control model : OKUMA OSP-5020 L
Maximum turning length (Z-axis) : 25.5 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.7 in
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : OKUMA OSP 700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 G
Maximum length of the grinding (shaft) : 25.6 in
Maximum diameter of the grinding (shaft) : 13 in
Maximum weight of the shaft between the centers : 110 lb
CNC control model : OKUMA OSP 700 G
Maximum length of the grinding (shaft) : 25.6 in
Maximum diameter of the grinding (shaft) : 13 in
Maximum weight of the shaft between the centers : 110 lb
United States
Michigan
Michigan
Year of manufacture : 2001
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 23.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 13 in
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : OKUMA OSP-700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP-700
Maximum turning length (Z-axis) : 19.9 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Michigan
Michigan
Year of manufacture : 2000
CNC control model : OKUMA OSP U 100
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
Number of spindles : 2 pcs
CNC control model : OKUMA OSP U 100
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 11.8 in
Number of spindles : 2 pcs
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : OKUMA OSP 7000
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
Michigan
Michigan
Year of manufacture : 2001
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 15.8 in
United States
Michigan
Michigan
Year of manufacture : 1992
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
CNC control model : OKUMA OSP 5020 L
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 18.9 in
Turning diameter over cross slide (max) : 14.2 in
United States
Michigan
Michigan
Year of manufacture : 2003
CNC control model : OKUMA U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA U 10 M
Length of the working table : 48 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1500 lb
United States
Michigan
Michigan
Year of manufacture : 2004
CNC control model : OKUMA OSP-E 100 M-H
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2600 lb
CNC control model : OKUMA OSP-E 100 M-H
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 2600 lb
United States
Michigan
Michigan
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 35.4 in
Maximum turning diameter : 17.7 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 35.4 in
Maximum turning diameter : 17.7 in
Maximum travel length in the X-axis : 22.8 in
United States
Michigan
Michigan
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LU-15 [2]CNC Lathes and Turning Centers OKUMA LU-15/2SC [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MX-50 HB [3]CNC Milling Machines and Machining Centers OKUMA MA-40 HA [3]
