OKUMA / page 3
Year of manufacture : 2002
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
CNC control model : OSP U 100 L
Maximum turning length (Z-axis) : 46.1 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 18.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1994
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
CNC control model : OSP 5020
Maximum turning length (Z-axis) : 26.4 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 9.1 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : OKUMA OSP 700 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.8 in
Turning diameter over cross slide (max) : 9.8 in
United States
Colorado
Colorado
Year of manufacture : 1997
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
CNC control model : OKUMA OSP 7000
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 21.6 in
Turning diameter over cross slide (max) : 15.8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 2012
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
United States
New York
New York
Year of manufacture : 2007
Length of the working table : 55.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 20 hp
Number of CNC controlled axles : 4 pcs
Length of the working table : 55.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 20 hp
Number of CNC controlled axles : 4 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 2002
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
CNC control model : OSP E 100 L
Turning diameter over bed (max) : 8.6 in
Turning diameter over cross slide (max) : 4.7 in
Number of spindles : 2 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 1998
CNC control model : OKUMA CNC CONTROL
Length of the working table : 40 in
Width of the working table : 20 in
Maximum rotary speed of the vertical spindle : 6000 1/min
CNC control model : OKUMA CNC CONTROL
Length of the working table : 40 in
Width of the working table : 20 in
Maximum rotary speed of the vertical spindle : 6000 1/min
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP 7000 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 5000 1/min
CNC control model : OKUMA OSP 7000 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum rotary speed of the spindle : 5000 1/min
United States
California
California
Year of manufacture : 2004
CNC control model : OKUMA OSP 700
Length of the working table : 35 in
Width of the working table : 16 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP 700
Length of the working table : 35 in
Width of the working table : 16 in
Maximum table load (evenly distributed) : 1500 lb
United States
California
California
Year of manufacture : 2005
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 20.8 in
Maximum power of the main spindle : 10 hp
CNC control model : OKUMA OSP-U 10 L
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 20.8 in
Maximum power of the main spindle : 10 hp
United States
California
California
Year of manufacture : 2006
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
CNC control model : OKUMA OSP E 100 L
Maximum turning length (Z-axis) : 49 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 18 in
United States
Arkansas
Arkansas
Year of manufacture : 1997
CNC control model : OKUMA OSP 700 M
Length of the working table : 47.2 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1500 lb
CNC control model : OKUMA OSP 700 M
Length of the working table : 47.2 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1500 lb
19500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
United States
Georgia
Georgia
Year of manufacture : 2008
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 15.8 in
Maximum power of the main spindle : 15 hp
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 15.8 in
Maximum power of the main spindle : 15 hp
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Florida
Florida
Year of manufacture : 2005
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 68.9 in
Turning diameter over bed (max) : 40.6 in
Turning diameter over cross slide (max) : 25.6 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 68.9 in
Turning diameter over bed (max) : 40.6 in
Turning diameter over cross slide (max) : 25.6 in
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA OSP-200 L
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 26.4 in
Turning diameter over cross slide (max) : 18.9 in
CNC control model : OKUMA OSP-200 L
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 26.4 in
Turning diameter over cross slide (max) : 18.9 in
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 11.8 in
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP-U 10 M
Length of the working table : 39 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 39.4 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 39.4 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 1999
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 30 in
Width of the working table : 16 in
Power of the spindle drive : 10 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA U 100
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2000
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : OKUMA OSP 700 M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA MACTURN 250 W [2]CNC Lathes and Turning Centers OKUMA LC 20 [2]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MA-40 HA [3]CNC Milling Machines and Machining Centers OKUMA MX-60 HB [3]
