MORI SEIKI
Year of manufacture : 2000
CNC control model : MAPPS FANUC
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 9.8 in
Maximum travel length in the X-axis : 7.9 in
CNC control model : MAPPS FANUC
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 9.8 in
Maximum travel length in the X-axis : 7.9 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2000
CNC control model : MAPPS FANUC
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 5.9 in
Maximum travel length in the X-axis : 7.9 in
CNC control model : MAPPS FANUC
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 5.9 in
Maximum travel length in the X-axis : 7.9 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2000
CNC control model : MSC - 501
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2204.6 lb
CNC control model : MSC - 501
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2204.6 lb
Netherlands
Gelderland
Gelderland
Year of manufacture : 2000
CNC control model : MSC 803
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 15.7 in
Maximum travel length in the X-axis : 7.9 in
CNC control model : MSC 803
Maximum turning length (Z-axis) : 15.7 in
Turning diameter over bed (max) : 15.7 in
Maximum travel length in the X-axis : 7.9 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2000
CNC control model : MORI SEIKI MSC-501
Machine weight : 11.1 short ton
Technical documentation
CNC control model : MORI SEIKI MSC-501
Machine weight : 11.1 short ton
Technical documentation
68665 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 2001
CNC control model : MORI MSG 803
Maximum turning length (Z-axis) : 9.1 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 13.4 in
CNC control model : MORI MSG 803
Maximum turning length (Z-axis) : 9.1 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 13.4 in
United States
Wisconsin
Wisconsin
Year of manufacture : 2002
CNC control model : MORI SEIKI MSG-803
Maximum turning length (Z-axis) : 5.9 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.4 in
CNC control model : MORI SEIKI MSG-803
Maximum turning length (Z-axis) : 5.9 in
Turning diameter over bed (max) : 15.6 in
Turning diameter over cross slide (max) : 9.4 in
United States
Minnesota
Minnesota
Year of manufacture : 2001
CNC control model : FANUC 18i-M
Length of the working table : 66.9 in
Width of the working table : 26 in
Maximum table load (evenly distributed) : 4400 lb
CNC control model : FANUC 18i-M
Length of the working table : 66.9 in
Width of the working table : 26 in
Maximum table load (evenly distributed) : 4400 lb
United States
California
California
Year of manufacture : 2000
CNC control model : FANUC CNC CONTROL
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 7.8 in
Maximum travel length in the X-axis : 9.3 in
CNC control model : FANUC CNC CONTROL
Maximum turning length (Z-axis) : 9.8 in
Turning diameter over bed (max) : 7.8 in
Maximum travel length in the X-axis : 9.3 in
United States
New York
New York
Year of manufacture : 2000
CNC control model : MORIC MSC-501
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Maximum travel length in the X-axis : 9.3 in
CNC control model : MORIC MSC-501
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Maximum travel length in the X-axis : 9.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : FANUC 18i-MA
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18i-MA
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2200 lb
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 19.5 in
Turning diameter over bed (max) : 26.7 in
Turning diameter over cross slide (max) : 20.1 in
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 19.5 in
Turning diameter over bed (max) : 26.7 in
Turning diameter over cross slide (max) : 20.1 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 9.4 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 9.4 in
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 31.5 in
Turning diameter over bed (max) : 28.1 in
Turning diameter over cross slide (max) : 19.7 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 31.5 in
Turning diameter over bed (max) : 28.1 in
Turning diameter over cross slide (max) : 19.7 in
United States
New York
New York
Year of manufacture : 2001
CNC control model : FANUC F 31i-A
Maximum turning length (Z-axis) : 60.7 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 29.5 in
CNC control model : FANUC F 31i-A
Maximum turning length (Z-axis) : 60.7 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 29.5 in
United States
Wisconsin
Wisconsin
Year of manufacture : 2000
CNC control model : FANUC 18 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2200 lb
United States
California
California
Year of manufacture : 2002
CNC control model : MORI SEIKI MSG-803
Maximum turning length (Z-axis) : 18.8 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 16.1 in
CNC control model : MORI SEIKI MSG-803
Maximum turning length (Z-axis) : 18.8 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 16.1 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2000
CNC control model : MORI SEIKI MSC-501
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 17.9 in
CNC control model : MORI SEIKI MSC-501
Maximum turning length (Z-axis) : 13.8 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 17.9 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2000
CNC control model : MORI SEIKI MSC 501
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.3 in
Turning diameter over cross slide (max) : 7 in
CNC control model : MORI SEIKI MSC 501
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 15.3 in
Turning diameter over cross slide (max) : 7 in
United States
New York
New York
Year of manufacture : 2001
CNC control model : MORI SEIKI MDG-501
Turning diameter over bed (max) : 26.7 in
Turning diameter over cross slide (max) : 15.3 in
Number of spindles : 2 pcs
CNC control model : MORI SEIKI MDG-501
Turning diameter over bed (max) : 26.7 in
Turning diameter over cross slide (max) : 15.3 in
Number of spindles : 2 pcs
United States
New York
New York
Year of manufacture : 2003
CNC control model : MORI SEIKI MSG 805
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over cross slide (max) : 20.1 in
Maximum travel length in the X-axis : 9.3 in
CNC control model : MORI SEIKI MSG 805
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over cross slide (max) : 20.1 in
Maximum travel length in the X-axis : 9.3 in
United States
New York
New York
Year of manufacture : 2000
CNC control model : FANUC 18i
Length of the working table : 66.9 in
Width of the working table : 26 in
Power of the spindle drive : 25 hp
CNC control model : FANUC 18i
Length of the working table : 66.9 in
Width of the working table : 26 in
Power of the spindle drive : 25 hp
United States
New York
New York
Year of manufacture : 2003
CNC control model : FANUC 18i-TA
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 20.1 in
CNC control model : FANUC 18i-TA
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 20.1 in
United States
Ohio
Ohio
Year of manufacture : 2002
CNC control model : MORI SEIKI MSG-805
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 20.1 in
CNC control model : MORI SEIKI MSG-805
Maximum turning length (Z-axis) : 29.6 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 20.1 in
United States
Illinois
Illinois
Year of manufacture : 2001
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 14.9 in
Minimum rotary speed of the main spindle : 40 rpm
Maximum rotary speed of the main spindle : 4000 rpm
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 14.9 in
Minimum rotary speed of the main spindle : 40 rpm
Maximum rotary speed of the main spindle : 4000 rpm
52326 USD
United Kingdom
Warwickshire
Warwickshire
Year of manufacture : 2001
CNC control model : Fanuc MSD-501II
Maximum turning length (Z-axis) : 16.7 in
Number of spindles : 2 pcs
Diameter of the spindle bore : 2.6 in
CNC control model : Fanuc MSD-501II
Maximum turning length (Z-axis) : 16.7 in
Number of spindles : 2 pcs
Diameter of the spindle bore : 2.6 in
Italy
Vicenza
Vicenza
Year of manufacture : 2003
CNC control model : FANUC
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Number of tools in the magazine : 28 pcs
CNC control model : FANUC
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Number of tools in the magazine : 28 pcs
Italy
Year of manufacture : 2003
Power of the spindle drive : 49.6 hp
Number of tools in the magazine : 150 pcs
Maximum rotary speed of the spindle : 6000 1/min
Travel length X-axis (mechanical feed) : 42.5 in
Power of the spindle drive : 49.6 hp
Number of tools in the magazine : 150 pcs
Maximum rotary speed of the spindle : 6000 1/min
Travel length X-axis (mechanical feed) : 42.5 in
Italy
Year of manufacture : 2001
CNC control model : FANUC MSG 501
Maximum turning length (Z-axis) : 51.2 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 11.8 in
CNC control model : FANUC MSG 501
Maximum turning length (Z-axis) : 51.2 in
Turning diameter over bed (max) : 21.7 in
Maximum travel length in the X-axis : 11.8 in
220930 USD
Italy
Lathes MORI SEIKI
Lathes MORI SEIKI DuraTurn 2550 [1]Lathes MORI SEIKI NL2500-700 [1]
CNC Lathes and Turning Centers MORI SEIKI
CNC Lathes and Turning Centers MORI SEIKI CL-200 B [3]CNC Lathes and Turning Centers MORI SEIKI NL 1500 SY [3]
CNC Milling Machines and Machining Centers MORI SEIKI
CNC Milling Machines and Machining Centers MORI SEIKI MV-55/50 [5]CNC Milling Machines and Machining Centers MORI SEIKI NH 4000 DCG [4]
