MORI SEIKI / page 4
Year of manufacture : 1991
CNC control model : FANUC O-TT
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 9 in
CNC control model : FANUC O-TT
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 9 in
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : MORI SEIKI MSG 803
Maximum turning length (Z-axis) : 7 in
Turning diameter over bed (max) : 15.5 in
Maximum travel length in the X-axis : 7.5 in
CNC control model : MORI SEIKI MSG 803
Maximum turning length (Z-axis) : 7 in
Turning diameter over bed (max) : 15.5 in
Maximum travel length in the X-axis : 7.5 in
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : MORI SEIKI MSC 518
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 17.9 in
CNC control model : MORI SEIKI MSC 518
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 17.9 in
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : FANUC 16 TT
Maximum turning length (Z-axis) : 35 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 16.7 in
CNC control model : FANUC 16 TT
Maximum turning length (Z-axis) : 35 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 16.7 in
United States
Michigan
Michigan
Year of manufacture : 1996
CNC control model : FANUC 16 M
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : FANUC 16 M
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2640 lb
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : FANUC 16 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1100 lb
CNC control model : FANUC 16 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1100 lb
United States
Michigan
Michigan
Year of manufacture : 1999
CNC control model : MORI SEIKI MSC-803
Maximum turning length (Z-axis) : 11.4 in
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.1 in
CNC control model : MORI SEIKI MSC-803
Maximum turning length (Z-axis) : 11.4 in
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.1 in
United States
Michigan
Michigan
Year of manufacture : 1999
CNC control model : MORI SEIKI MSC-803
Maximum turning length (Z-axis) : 11.4 in
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.1 in
CNC control model : MORI SEIKI MSC-803
Maximum turning length (Z-axis) : 11.4 in
Turning diameter over bed (max) : 20.3 in
Turning diameter over cross slide (max) : 16.1 in
United States
Michigan
Michigan
Year of manufacture : 1997
CNC control model : FANUC 16 T-B
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 7.8 in
CNC control model : FANUC 16 T-B
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 7.8 in
United States
Ohio
Ohio
Year of manufacture : 2003
CNC control model : FANUC 18i-TA
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 20.1 in
CNC control model : FANUC 18i-TA
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Turning diameter over cross slide (max) : 20.1 in
United States
Ohio
Ohio
Year of manufacture : 1996
CNC control model : MORI SEIKI MSC-801
Maximum turning length (Z-axis) : 2 in
Turning diameter over bed (max) : 12.6 in
Turning diameter over cross slide (max) : 3.3 in
CNC control model : MORI SEIKI MSC-801
Maximum turning length (Z-axis) : 2 in
Turning diameter over bed (max) : 12.6 in
Turning diameter over cross slide (max) : 3.3 in
United States
Ohio
Ohio
Year of manufacture : 1984
CNC control model : FANUC 3 TF
Maximum turning length (Z-axis) : 40.1 in
Turning diameter over bed (max) : 24.4 in
Maximum power of the main spindle : 25 hp
CNC control model : FANUC 3 TF
Maximum turning length (Z-axis) : 40.1 in
Turning diameter over bed (max) : 24.4 in
Maximum power of the main spindle : 25 hp
United States
Illinois
Illinois
Year of manufacture : 1996
CNC control model : FANUC 16-T
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 35 in
Maximum power of the main spindle : 50 hp
CNC control model : FANUC 16-T
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 35 in
Maximum power of the main spindle : 50 hp
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : MORI SEIKI MSC 501
Length of the working table : 55.1 in
Width of the working table : 21.7 in
Maximum table load (evenly distributed) : 3300 lb
CNC control model : MORI SEIKI MSC 501
Length of the working table : 55.1 in
Width of the working table : 21.7 in
Maximum table load (evenly distributed) : 3300 lb
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : MORI SEIKI MSG-803
Length of the working table : 66.9 in
Width of the working table : 26 in
Maximum table load (evenly distributed) : 4400 lb
CNC control model : MORI SEIKI MSG-803
Length of the working table : 66.9 in
Width of the working table : 26 in
Maximum table load (evenly distributed) : 4400 lb
United States
Illinois
Illinois
Year of manufacture : 1991
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 39.9 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 39.9 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 13.8 in
United States
Illinois
Illinois
Year of manufacture : 1996
CNC control model : FANUC MSC-501
Length of the working table : 55.1 in
Width of the working table : 21.7 in
Power of the spindle drive : 10 hp
CNC control model : FANUC MSC-501
Length of the working table : 55.1 in
Width of the working table : 21.7 in
Power of the spindle drive : 10 hp
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : MORI SEIKI MSC-501
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 20 hp
CNC control model : MORI SEIKI MSC-501
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1986
CNC control model : FANUC 11-M
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 10 hp
CNC control model : FANUC 11-M
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 10 hp
United States
Illinois
Illinois
Year of manufacture : 1999
CNC control model : FANUC 16-M
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 16-M
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6600 lb
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : FANUC MSC-516
Length of the working table : 20 in
Width of the working table : 20 in
Power of the spindle drive : 33.5 hp
CNC control model : FANUC MSC-516
Length of the working table : 20 in
Width of the working table : 20 in
Power of the spindle drive : 33.5 hp
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : FANUC 16-M
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 20 hp
CNC control model : FANUC 16-M
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 1986
CNC control model : FANUC 10-T
Maximum turning length (Z-axis) : 12.4 in
Turning diameter over bed (max) : 16.5 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : FANUC 10-T
Maximum turning length (Z-axis) : 12.4 in
Turning diameter over bed (max) : 16.5 in
Turning diameter over cross slide (max) : 11.8 in
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 68.9 in
Turning diameter over bed (max) : 35.8 in
Diameter of the spindle bore : 6.3 in
CNC control model : FANUC 18-T
Maximum turning length (Z-axis) : 68.9 in
Turning diameter over bed (max) : 35.8 in
Diameter of the spindle bore : 6.3 in
United States
Illinois
Illinois
Year of manufacture : 1982
CNC control model : FANUC 6-T
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 27.5 in
Turning diameter over cross slide (max) : 22.1 in
CNC control model : FANUC 6-T
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 27.5 in
Turning diameter over cross slide (max) : 22.1 in
United States
Illinois
Illinois
Year of manufacture : 1996
CNC control model : FANUC 16-T
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 35 in
Turning diameter over cross slide (max) : 22 in
CNC control model : FANUC 16-T
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 35 in
Turning diameter over cross slide (max) : 22 in
United States
Illinois
Illinois
Year of manufacture : 1989
CNC control model : FANUC 10-T
Maximum turning length (Z-axis) : 24.6 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : FANUC 10-T
Maximum turning length (Z-axis) : 24.6 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 13.8 in
United States
Illinois
Illinois
Year of manufacture : 1989
CNC control model : FANUC 10-T
Maximum turning length (Z-axis) : 23.4 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 6.3 in
CNC control model : FANUC 10-T
Maximum turning length (Z-axis) : 23.4 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 6.3 in
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : FANUC 16-TT
Maximum turning length (Z-axis) : 32.9 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 16.7 in
CNC control model : FANUC 16-TT
Maximum turning length (Z-axis) : 32.9 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 16.7 in
United States
Illinois
Illinois
Year of manufacture : 1986
CNC control model : FANUC 11-M
Length of the working table : 55.1 in
Width of the working table : 21.7 in
Power of the spindle drive : 15 hp
CNC control model : FANUC 11-M
Length of the working table : 55.1 in
Width of the working table : 21.7 in
Power of the spindle drive : 15 hp
United States
Illinois
Illinois
CNC Lathes and Turning Centers MORI SEIKI
CNC Lathes and Turning Centers MORI SEIKI CL-25 A [2]CNC Lathes and Turning Centers MORI SEIKI SL-75 B [2]
CNC Milling Machines and Machining Centers MORI SEIKI
CNC Milling Machines and Machining Centers MORI SEIKI MV-40B [2]CNC Milling Machines and Machining Centers MORI SEIKI SH-40 [2]
