MORI SEIKI / page 3
Year of manufacture : 2011
CNC control model : MORI MSX-850
Maximum turning length (Z-axis) : 31.3 in
Turning diameter over bed (max) : 36.2 in
Turning diameter over cross slide (max) : 29.2 in
CNC control model : MORI MSX-850
Maximum turning length (Z-axis) : 31.3 in
Turning diameter over bed (max) : 36.2 in
Turning diameter over cross slide (max) : 29.2 in
United States
South Carolina
South Carolina
Year of manufacture : 1986
CNC control model : FANUC 11 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : FANUC 11 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 51.2 in
Turning diameter over cross slide (max) : 43.3 in
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 51.2 in
Turning diameter over cross slide (max) : 43.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : FANUC MSC-504
Length of the working table : 53.1 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC MSC-504
Length of the working table : 53.1 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2200 lb
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 13.8 in
United States
South Carolina
South Carolina
Year of manufacture : 1982
CNC control model : FANUC 6 TB
Maximum turning length (Z-axis) : 33.9 in
Turning diameter over bed (max) : 35 in
Maximum travel length in the X-axis : 13.8 in
CNC control model : FANUC 6 TB
Maximum turning length (Z-axis) : 33.9 in
Turning diameter over bed (max) : 35 in
Maximum travel length in the X-axis : 13.8 in
United States
South Carolina
South Carolina
Year of manufacture : 1979
CNC control model : YASNAC 2000 G
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 25.5 in
Turning diameter over cross slide (max) : 15.3 in
CNC control model : YASNAC 2000 G
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 25.5 in
Turning diameter over cross slide (max) : 15.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : SIEMENS SINUMERIK 840 D
Maximum turning length (Z-axis) : 51.2 in
Turning diameter over bed (max) : 19.7 in
Maximum travel length in the X-axis : 17.7 in
CNC control model : SIEMENS SINUMERIK 840 D
Maximum turning length (Z-axis) : 51.2 in
Turning diameter over bed (max) : 19.7 in
Maximum travel length in the X-axis : 17.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : FANUC 16 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : FANUC 16 M
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : MORIC MSC-501
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Maximum travel length in the X-axis : 9.3 in
CNC control model : MORIC MSC-501
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 26.8 in
Maximum travel length in the X-axis : 9.3 in
United States
South Carolina
South Carolina
Year of manufacture : 2012
CNC control model : FANUC 21i-TB
Maximum turning diameter : 25.5 in
Maximum height of the workpiece : 25.7 in
Maximum length of the vertical travel of the transverse beam : 26 in
CNC control model : FANUC 21i-TB
Maximum turning diameter : 25.5 in
Maximum height of the workpiece : 25.7 in
Maximum length of the vertical travel of the transverse beam : 26 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : MORIC MSX-853
Length of the working table : 53.1 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : MORIC MSX-853
Length of the working table : 53.1 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2640 lb
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : FANUC 18i-MA
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18i-MA
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2200 lb
United States
South Carolina
South Carolina
Year of manufacture : 2008
CNC control model : MORIC MSX-501 III
Length of the working table : 52 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : MORIC MSX-501 III
Length of the working table : 52 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2640 lb
United States
South Carolina
South Carolina
Year of manufacture : 2009
CNC control model : MITSUBISHI CNC CONTROL
Maximum turning length (Z-axis) : 31.3 in
Turning diameter over bed (max) : 36.4 in
Turning diameter over cross slide (max) : 29.7 in
CNC control model : MITSUBISHI CNC CONTROL
Maximum turning length (Z-axis) : 31.3 in
Turning diameter over bed (max) : 36.4 in
Turning diameter over cross slide (max) : 29.7 in
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : FANUC 16 M
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Power of the spindle drive : 7.5 hp
CNC control model : FANUC 16 M
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Power of the spindle drive : 7.5 hp
United States
South Carolina
South Carolina
Year of manufacture : 2007
CNC control model : MORIC MSX-701 I
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1100 lb
CNC control model : MORIC MSX-701 I
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1100 lb
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 9.4 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 9.4 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 19.5 in
Turning diameter over bed (max) : 26.7 in
Turning diameter over cross slide (max) : 20.1 in
CNC control model : FANUC 21 iT
Maximum turning length (Z-axis) : 19.5 in
Turning diameter over bed (max) : 26.7 in
Turning diameter over cross slide (max) : 20.1 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : MORI MSX-711 IV
Maximum turning length (Z-axis) : 18.1 in
Turning diameter over cross slide (max) : 14.5 in
Maximum travel length in the X-axis : 15 in
CNC control model : MORI MSX-711 IV
Maximum turning length (Z-axis) : 18.1 in
Turning diameter over cross slide (max) : 14.5 in
Maximum travel length in the X-axis : 15 in
United States
Colorado
Colorado
Year of manufacture : 2007
CNC control model : FANUC MSC 504
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : FANUC MSC 504
Length of the working table : 43.3 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 1760 lb
United States
New York
New York
Year of manufacture : 1999
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 18.5 in
Turning diameter over bed (max) : 20.5 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 18.5 in
Turning diameter over bed (max) : 20.5 in
Maximum travel length in the X-axis : 10.2 in
United States
New York
New York
Year of manufacture : 1999
CNC control model : FANUC MSC-502 16i-MA
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : FANUC MSC-502 16i-MA
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
New York
New York
Year of manufacture : 2001
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 31.5 in
Turning diameter over bed (max) : 28.1 in
Turning diameter over cross slide (max) : 19.7 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 31.5 in
Turning diameter over bed (max) : 28.1 in
Turning diameter over cross slide (max) : 19.7 in
United States
New York
New York
Year of manufacture : 2007
CNC control model : MORI SEIKI MSX-850 III
Maximum turning length (Z-axis) : 20.2 in
Turning diameter over bed (max) : 22.8 in
Turning diameter over cross slide (max) : 29.7 in
CNC control model : MORI SEIKI MSX-850 III
Maximum turning length (Z-axis) : 20.2 in
Turning diameter over bed (max) : 22.8 in
Turning diameter over cross slide (max) : 29.7 in
United States
New York
New York
Year of manufacture : 2007
CNC control model : FANUC - MORI MSX-850 FANUC - MORI MSX-850
Maximum turning length (Z-axis) : 27.8 in
Turning diameter over bed (max) : 14.1 in
Turning diameter over cross slide (max) : 14 in
CNC control model : FANUC - MORI MSX-850 FANUC - MORI MSX-850
Maximum turning length (Z-axis) : 27.8 in
Turning diameter over bed (max) : 14.1 in
Turning diameter over cross slide (max) : 14 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1999
CNC control model : FANUC MF-M6
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC MF-M6
Length of the working table : 32.7 in
Width of the working table : 21.3 in
Maximum table load (evenly distributed) : 1540 lb
United States
Wisconsin
Wisconsin
Year of manufacture : 2001
CNC control model : FANUC F 31i-A
Maximum turning length (Z-axis) : 60.7 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 29.5 in
CNC control model : FANUC F 31i-A
Maximum turning length (Z-axis) : 60.7 in
Turning diameter over cross slide (max) : 28.7 in
Maximum travel length in the X-axis : 29.5 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1999
CNC control model : FANUC 16 M
Length of the working table : 24 in
Width of the working table : 24 in
Number of tools in the magazine : 180 pcs
CNC control model : FANUC 16 M
Length of the working table : 24 in
Width of the working table : 24 in
Number of tools in the magazine : 180 pcs
United States
California
California
Year of manufacture : 2007
CNC control model : MORI SEIKI MSX-504 M
Length of the working table : 43 in
Width of the working table : 23 in
Number of tools in the magazine : 30 pcs
CNC control model : MORI SEIKI MSX-504 M
Length of the working table : 43 in
Width of the working table : 23 in
Number of tools in the magazine : 30 pcs
United States
California
California
Lathes MORI SEIKI
Lathes MORI SEIKI NL2500-700 [1]Lathes MORI SEIKI MR-1500 G [1]
CNC Lathes and Turning Centers MORI SEIKI
CNC Lathes and Turning Centers MORI SEIKI NTX 1000 SZM [2]CNC Lathes and Turning Centers MORI SEIKI RL-253 [2]
CNC Milling Machines and Machining Centers MORI SEIKI
CNC Milling Machines and Machining Centers MORI SEIKI NH 4000-DCG [3]CNC Milling Machines and Machining Centers MORI SEIKI MV-JR [2]
