MAZAK / page 18
Yamazaki Mazak Corporation
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 41.1 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 41.1 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2001
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 21.3 in
Maximum travel length in the X-axis : 20.9 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 21.3 in
Maximum travel length in the X-axis : 20.9 in
France
Isère
Isère
Year of manufacture : 2011
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 39.8 in
Maximum turning diameter : 25.9 in
Maximum travel length in the X-axis : 24.2 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 39.8 in
Maximum turning diameter : 25.9 in
Maximum travel length in the X-axis : 24.2 in
France
Isère
Isère
Year of manufacture : 2007
CNC control model : MAZAK MATRIX
Length of the working table : 24.8 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
CNC control model : MAZAK MATRIX
Length of the working table : 24.8 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
France
Isère
Isère
Year of manufacture : 2008
CNC control model : MAZAK MATRIX
Length of the working table : 137.8 in
Width of the working table : 32.3 in
Maximum table load (evenly distributed) : 5511.6 lb
CNC control model : MAZAK MATRIX
Length of the working table : 137.8 in
Width of the working table : 32.3 in
Maximum table load (evenly distributed) : 5511.6 lb
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 88.2 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 5511.6 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 88.2 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 5511.6 lb
France
Isère
Isère
Year of manufacture : 2008
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 17.9 in
Turning diameter over bed (max) : 11 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 17.9 in
Turning diameter over bed (max) : 11 in
Maximum travel length in the X-axis : 7.3 in
France
Isère
Isère
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 12.2 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 12.2 in
France
Isère
Isère
Year of manufacture : 2001
CNC control model : FANUC PC FUSION 640 MT
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 21.3 in
Maximum travel length in the X-axis : 20.9 in
CNC control model : FANUC PC FUSION 640 MT
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 21.3 in
Maximum travel length in the X-axis : 20.9 in
France
Isère
Isère
Year of manufacture : 2007
CNC control model : MAZAK MATRIX
Diameter of the table : 24 in
Maximum turning diameter : 28.7 in
Maximum height of the workpiece : 39.4 in
CNC control model : MAZAK MATRIX
Diameter of the table : 24 in
Maximum turning diameter : 28.7 in
Maximum height of the workpiece : 39.4 in
France
Isère
Isère
Year of manufacture : 1995
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 11.2 in
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 6.3 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 11.2 in
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 6.3 in
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 881.8 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 881.8 lb
France
Isère
Isère
Year of manufacture : 1998
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
France
Isère
Isère
Year of manufacture : 2010
CNC control model : MAZAK MATRIX
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
CNC control model : MAZAK MATRIX
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK PC FUSION 640 T
Maximum turning length (Z-axis) : 22.6 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK PC FUSION 640 T
Maximum turning length (Z-axis) : 22.6 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK PC FUSION
Maximum turning length (Z-axis) : 40 in
Maximum turning diameter : 26 in
Maximum feed rate in X-axis : 1496.1 in/min
CNC control model : MAZAK PC FUSION
Maximum turning length (Z-axis) : 40 in
Maximum turning diameter : 26 in
Maximum feed rate in X-axis : 1496.1 in/min
France
Isère
Isère
Year of manufacture : 2006
CNC control model : MAZAK MATRIX
Diameter of the table : 39.4 in
Maximum turning diameter : 49.2 in
Maximum height of the workpiece : 49.2 in
CNC control model : MAZAK MATRIX
Diameter of the table : 39.4 in
Maximum turning diameter : 49.2 in
Maximum height of the workpiece : 49.2 in
France
Isère
Isère
Year of manufacture : 2013
CNC control model : MAZAK MATRIX 2
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 20.9 in
Maximum travel length in the X-axis : 17.7 in
CNC control model : MAZAK MATRIX 2
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 20.9 in
Maximum travel length in the X-axis : 17.7 in
France
Isère
Isère
Year of manufacture : 1999
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
France
Isère
Isère
Year of manufacture : 2011
CNC control model : MAZAK MATRIX
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 3306.9 lb
CNC control model : MAZAK MATRIX
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 3306.9 lb
France
Isère
Isère
Year of manufacture : 2007
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
France
Isère
Isère
Year of manufacture : 2010
CNC control model : MAZAK MATRIX
Length of the working table : 19.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 661.4 lb
CNC control model : MAZAK MATRIX
Length of the working table : 19.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 661.4 lb
France
Isère
Isère
Year of manufacture : 2006
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2007
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK PC FUSION 640 MT PRO
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 29.9 in
Maximum travel length in the X-axis : 24.8 in
CNC control model : MAZAK PC FUSION 640 MT PRO
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 29.9 in
Maximum travel length in the X-axis : 24.8 in
France
Isère
Isère
Year of manufacture : 2013
CNC control model : MAZAK MATRIX 2
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 25.9 in
Maximum travel length in the X-axis : 24.2 in
CNC control model : MAZAK MATRIX 2
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 25.9 in
Maximum travel length in the X-axis : 24.2 in
France
Isère
Isère
Year of manufacture : 2011
CNC control model : MATRIX CNC CONTROL
Maximum turning length (Z-axis) : 29.6 in
Maximum turning diameter : 21.5 in
Maximum travel length in the X-axis : 16.1 in
CNC control model : MATRIX CNC CONTROL
Maximum turning length (Z-axis) : 29.6 in
Maximum turning diameter : 21.5 in
Maximum travel length in the X-axis : 16.1 in
France
Isère
Isère
CNC Lathes and Turning Centers MAZAK
CNC Lathes and Turning Centers MAZAK SLANT TURN 60 [2]CNC Lathes and Turning Centers MAZAK INTEGREX 200 SY [2]
CNC Milling Machines and Machining Centers MAZAK
CNC Milling Machines and Machining Centers MAZAK VCN 510 C-II [2]CNC Milling Machines and Machining Centers MAZAK H 415 [2]
Lasers MAZAK
Lasers MAZAK Super Turbo - x510 Hi-Pro-Supercharged [1]Lasers MAZAK SUPER TURBO X510 Hi PRO Supercharged [1]
