MAZAK / page 14
Yamazaki Mazak Corporation
Year of manufacture : 2008
CNC control model : MAZAK MAZATROL MATRIX
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 29.5 hp
CNC control model : MAZAK MAZATROL MATRIX
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 29.5 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1990
CNC control model : MAZAK MAZATROL T 32
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 45.6 hp
CNC control model : MAZAK MAZATROL T 32
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 45.6 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 15 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 15 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2006
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 60.6 in
Turning diameter over bed (max) : 16.5 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 60.6 in
Turning diameter over bed (max) : 16.5 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2007
CNC control model : MAZAK MAZATROL 640 M
Length of the working table : 78.7 in
Width of the working table : 29.9 in
Power of the spindle drive : 14.7 hp
CNC control model : MAZAK MAZATROL 640 M
Length of the working table : 78.7 in
Width of the working table : 29.9 in
Power of the spindle drive : 14.7 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2000
CNC control model : EIA CNC CONTROL
Turning diameter over bed (max) : 3.7 in
Maximum feed rate in X-axis : 787.4 in/min
Maximum feed rate in Z-axis : 787.4 in/min
CNC control model : EIA CNC CONTROL
Turning diameter over bed (max) : 3.7 in
Maximum feed rate in X-axis : 787.4 in/min
Maximum feed rate in Z-axis : 787.4 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1992
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 88.2 in
Width of the working table : 29.5 in
Power of the spindle drive : 29.5 hp
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 88.2 in
Width of the working table : 29.5 in
Power of the spindle drive : 29.5 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2001
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 49.6 hp
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 49.6 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 15 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 15 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2000
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 39.6 in
Turning diameter over bed (max) : 21.3 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 39.6 in
Turning diameter over bed (max) : 21.3 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2008
CNC control model : MAZAK MAZATROL MATRIX
Maximum turning length (Z-axis) : 46.2 in
Turning diameter over bed (max) : 16.5 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL MATRIX
Maximum turning length (Z-axis) : 46.2 in
Turning diameter over bed (max) : 16.5 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1989
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20.1 hp
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20.1 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1994
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 35.4 in
Width of the working table : 16.1 in
Power of the spindle drive : 10.1 hp
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 35.4 in
Width of the working table : 16.1 in
Power of the spindle drive : 10.1 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2008
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 29.5 hp
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 29.5 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2003
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 20.7 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 20.7 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 22.6 in
Turning diameter over bed (max) : 15 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL 640 T NEXUS
Maximum turning length (Z-axis) : 22.6 in
Turning diameter over bed (max) : 15 in
Maximum feed rate in X-axis : 1181.1 in/min
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2008
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3306.9 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3306.9 lb
France
Isère
Isère
Year of manufacture : 2006
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 60.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 60.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
France
Isère
Isère
Year of manufacture : 2002
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 18.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 18.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
France
Isère
Isère
Year of manufacture : 2000
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3306.9 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3306.9 lb
France
Isère
Isère
Year of manufacture : 2001
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 11.8 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 11.8 in
Maximum feed rate in X-axis : 1181.1 in/min
France
Isère
Isère
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 38.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 38.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
France
Isère
Isère
Year of manufacture : 2008
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 25.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
France
Isère
Isère
Year of manufacture : 1998
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 47.2 in
Width of the working table : 21.7 in
Maximum table load (evenly distributed) : 2645.6 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 47.2 in
Width of the working table : 21.7 in
Maximum table load (evenly distributed) : 2645.6 lb
France
Isère
Isère
Year of manufacture : 2000
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2204.6 lb
Power of the spindle drive : 34.9 hp
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2204.6 lb
Power of the spindle drive : 34.9 hp
France
Isère
Isère
Year of manufacture : 1995
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 20.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15.7 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 20.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15.7 in
France
Isère
Isère
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 18.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 18.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
France
Isère
Isère
Year of manufacture : 2000
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 4850.2 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 4850.2 lb
France
Isère
Isère
Year of manufacture : 1994
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 17.1 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 17.1 in
Turning diameter over cross slide (max) : 14.6 in
France
Isère
Isère
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 18.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 18.7 in
Turning diameter over bed (max) : 13.8 in
Maximum travel length in the X-axis : 7.5 in
France
Isère
Isère
CNC Lathes and Turning Centers MAZAK
CNC Lathes and Turning Centers MAZAK INTEGREX 300 Y [2]CNC Lathes and Turning Centers MAZAK QT 280 [2]
CNC Milling Machines and Machining Centers MAZAK
CNC Milling Machines and Machining Centers MAZAK VQC-15/40 [2]CNC Milling Machines and Machining Centers MAZAK PFH 4800 [2]
Lasers MAZAK
Lasers MAZAK SPACEGEAR 510 MK II [1]Lasers MAZAK space gear SG48 / LS-05 [1]
