Jig borer STANKOIMPORT 2B440A

Category Drilling Machines STANKOIMPORT ›
Manufacturer STANKOIMPORT ›

ARCHIVED AD
Jig borer STANKOIMPORT 2B440A was manufactured by the machine manufacturer STANKOIMPORT. Machine STANKOIMPORT 2B440A was built in 1966 year.

General data

Location Poland
region Dolnośląskie
Year of manufacture 1966
Warranty Without warranty
Technical condition Good
Payment Before receipt
Transport The buyer organizes the transport at his own cost
Status A test can be performed

Technical parameters

Maximum drilling diameter in steel 0.984252 in
Maximum boring diameter 9.8 in
Length of the working table 31.5 in
Width of the working table 15.7 in
Throat depth (distance of the spindle axis from the frame) 19.7 in
Maximum distance from the spindle to the table 24.8 in
Maximum table load (evenly distributed) 705.5 lb
Travel length X-axis (mechanical feed) 28 in
Travel length Y-axis (mechanical feed) 15.7 in
Travel length Z-axis (mechanical feed) 10.6 in
Maximum feed rate in X-axis 0.524934 in/s
Minimum feed rate in X-axis 0.010499 in/s
Machine height 93.9 in
Machine length 99.2 in
Machine width 86.4 in
Machine weight 3.7 short ton

Equipment

Automatic travel of the quill
Automatic travel of the headstock
Rapid feed of the headstock
The working table enables feed in the X and Y axis
The working table enables feed in the Z axis
Rapid feed of the table
Boring head
C-frame type
Central lubrication
Liquid cooling system
Lighting
Technical documentation
‹ previous WMW HECKERT FZ 1250-1250-2000 JAFO Jarocin FYD 32 STANKOIMPORT 2B440A MECHANICY FYM 50 NM KTK T-80 A next ›