HITACHI SEIKI
Year of manufacture : 1986
CNC control model : FANUC 11-M
Length of the working table : 131.9 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 11-M
Length of the working table : 131.9 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : SEIKI SEICOS 16 M
Power of the spindle drive : 40 hp
Number of CNC controlled axles : 4 pcs
Number of tools in the magazine : 60 pcs
CNC control model : SEIKI SEICOS 16 M
Power of the spindle drive : 40 hp
Number of CNC controlled axles : 4 pcs
Number of tools in the magazine : 60 pcs
United States
Colorado
Colorado
Year of manufacture : 1987
CNC control model : FANUC 11 MA
Length of the working table : 20 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
CNC control model : FANUC 11 MA
Length of the working table : 20 in
Width of the working table : 20 in
Power of the spindle drive : 15 hp
United States
New York
New York
Year of manufacture : 1997
CNC control model : FANUC 15 MB
Length of the working table : 16 in
Width of the working table : 16 in
Power of the spindle drive : 15 hp
CNC control model : FANUC 15 MB
Length of the working table : 16 in
Width of the working table : 16 in
Power of the spindle drive : 15 hp
United States
New York
New York
Year of manufacture : 1993
CNC control model : SEICO L MULTI
Maximum turning length (Z-axis) : 44 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 13 in
CNC control model : SEICO L MULTI
Maximum turning length (Z-axis) : 44 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 13 in
United States
South Carolina
South Carolina
Year of manufacture : 1993
CNC control model : SEICO L MULTI
Maximum turning length (Z-axis) : 44 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 13 in
CNC control model : SEICO L MULTI
Maximum turning length (Z-axis) : 44 in
Turning diameter over bed (max) : 27.6 in
Maximum travel length in the X-axis : 13 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 11.4 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 24.4 in
Maximum travel length in the X-axis : 11.4 in
United States
South Carolina
South Carolina
Year of manufacture : 1983
Travel length X-axis (mechanical feed) : 21 in
Travel length Y-axis (mechanical feed) : 16 in
Travel length Z-axis (mechanical feed) : 20 in
Technical documentation
Travel length X-axis (mechanical feed) : 21 in
Travel length Y-axis (mechanical feed) : 16 in
Travel length Z-axis (mechanical feed) : 20 in
Technical documentation
United States
California
California
Year of manufacture : 1995
CNC control model : HITACHI SEIKI CNC CONTROL
Travel length X-axis (mechanical feed) : 16 in
Travel length Y-axis (mechanical feed) : 24 in
Travel length Z-axis (mechanical feed) : 16 in
CNC control model : HITACHI SEIKI CNC CONTROL
Travel length X-axis (mechanical feed) : 16 in
Travel length Y-axis (mechanical feed) : 24 in
Travel length Z-axis (mechanical feed) : 16 in
United States
California
California
Year of manufacture : 1992
CNC control model : SEICOS CNC CONTROL
Maximum turning length (Z-axis) : 24 in
Maximum travel length in the X-axis : 12 in
Maximum power of the main spindle : 20 hp
CNC control model : SEICOS CNC CONTROL
Maximum turning length (Z-axis) : 24 in
Maximum travel length in the X-axis : 12 in
Maximum power of the main spindle : 20 hp
United States
California
California
Year of manufacture : 1997
CNC control model : SEICOS CNC CONTROL
Maximum turning length (Z-axis) : 24 in
Turning diameter over bed (max) : 17 in
Turning diameter over cross slide (max) : 13 in
CNC control model : SEICOS CNC CONTROL
Maximum turning length (Z-axis) : 24 in
Turning diameter over bed (max) : 17 in
Turning diameter over cross slide (max) : 13 in
United States
California
California
Year of manufacture : 1996
CNC control model : SEICOS CNC CONTROL
Maximum turning length (Z-axis) : 24 in
Maximum travel length in the X-axis : 12 in
Maximum power of the main spindle : 20 hp
CNC control model : SEICOS CNC CONTROL
Maximum turning length (Z-axis) : 24 in
Maximum travel length in the X-axis : 12 in
Maximum power of the main spindle : 20 hp
United States
California
California
Year of manufacture : 1993
CNC control model : YASNAC CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 40 hp
CNC control model : YASNAC CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 40 hp
United States
Florida
Florida
Year of manufacture : 1992
CNC control model : YASNAC CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 40 hp
CNC control model : YASNAC CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 40 hp
United States
Florida
Florida
Year of manufacture : 1997
CNC control model : SEICOS SIGMA 10 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 15 hp
CNC control model : SEICOS SIGMA 10 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 1988
CNC control model : SEICOS M II
Length of the working table : 55 in
Width of the working table : 22 in
Power of the spindle drive : 15 hp
CNC control model : SEICOS M II
Length of the working table : 55 in
Width of the working table : 22 in
Power of the spindle drive : 15 hp
United States
Illinois
Illinois
Year of manufacture : 1994
CNC control model : FANUC CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2000 lb
CNC control model : FANUC CNC CONTROL
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2000 lb
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : SEICOS LAMDA 10 L
Maximum turning length (Z-axis) : 43 in
Turning diameter over bed (max) : 21.3 in
Turning diameter over cross slide (max) : 15 in
CNC control model : SEICOS LAMDA 10 L
Maximum turning length (Z-axis) : 43 in
Turning diameter over bed (max) : 21.3 in
Turning diameter over cross slide (max) : 15 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : FANUC 15-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : FANUC 15-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2640 lb
United States
Illinois
Illinois
Year of manufacture : 1987
CNC control model : FANUC 11-M
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Number of tools in the magazine : 60 pcs
CNC control model : FANUC 11-M
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Number of tools in the magazine : 60 pcs
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : HITACHI SEIKI SEICOS A 10L
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 13.8 in
Maximum feed rate in X-axis : 984.3 in/min
CNC control model : HITACHI SEIKI SEICOS A 10L
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 13.8 in
Maximum feed rate in X-axis : 984.3 in/min
14 USD
Italy
Ravenna
Ravenna
Year of manufacture : 1997
C-axis indexed
Y-axis
C-axis indexed
Y-axis
Poland
Year of manufacture : 1985
CNC control model : FANUC 6T
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 29.5 in
Turning diameter over cross slide (max) : 21.7 in
CNC control model : FANUC 6T
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 29.5 in
Turning diameter over cross slide (max) : 21.7 in
30000 USD
Peru
Lima
Lima
Year of manufacture : 1983
CNC control model : FANUC SYSTEM 6T
Maximum turning length (Z-axis) : 17.7 in
Turning diameter over cross slide (max) : 17.7 in
Maximum power of the main spindle : 24.1 hp
CNC control model : FANUC SYSTEM 6T
Maximum turning length (Z-axis) : 17.7 in
Turning diameter over cross slide (max) : 17.7 in
Maximum power of the main spindle : 24.1 hp
Italy
Perugia
Perugia
Year of manufacture : 1997
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
Power of the spindle drive : 10 hp
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
Power of the spindle drive : 10 hp
Canada
Alberta
Alberta
Year of manufacture : 1991
CNC control model : YASNAC
Maximum turning length (Z-axis) : 15 in
Turning diameter over bed (max) : 8.3 in
Diameter of the spindle bore : 2 in
CNC control model : YASNAC
Maximum turning length (Z-axis) : 15 in
Turning diameter over bed (max) : 8.3 in
Diameter of the spindle bore : 2 in
United Kingdom
West Sussex
West Sussex
Year of manufacture : 1998
Maximum turning length (Z-axis) : 5.9 in
Maximum turning diameter : 15.7 in
Maximum travel length in the X-axis : 51.2 in
Maximum power of the main spindle : 14.7 hp
Maximum turning length (Z-axis) : 5.9 in
Maximum turning diameter : 15.7 in
Maximum travel length in the X-axis : 51.2 in
Maximum power of the main spindle : 14.7 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1995
CNC control model : FANUC YASNAC
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 15 in
CNC control model : FANUC YASNAC
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 15 in
12209 USD
Italy
Year of manufacture : 1995
CNC control model : SEICOS L 111
Maximum turning length (Z-axis) : 98.4 in
Maximum turning diameter : 27.6 in
Maximum power of the main spindle (turning) : 40.2 hp
CNC control model : SEICOS L 111
Maximum turning length (Z-axis) : 98.4 in
Maximum turning diameter : 27.6 in
Maximum power of the main spindle (turning) : 40.2 hp
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
Year of manufacture : 1997
CNC control model : SIECOS CNC CONTROL
Length of the working table : 44.1 in
Width of the working table : 19.1 in
Number of tools in the magazine : 30 pcs
CNC control model : SIECOS CNC CONTROL
Length of the working table : 44.1 in
Width of the working table : 19.1 in
Number of tools in the magazine : 30 pcs
Germany
Nordrhein-Westfalen
Nordrhein-Westfalen
CNC Lathes and Turning Centers HITACHI SEIKI
CNC Lathes and Turning Centers HITACHI SEIKI HT-20-S-II [2]CNC Lathes and Turning Centers HITACHI SEIKI HICELL 40 [2]
CNC Milling Machines and Machining Centers HITACHI SEIKI
CNC Milling Machines and Machining Centers HITACHI SEIKI HG-630 [3]CNC Milling Machines and Machining Centers HITACHI SEIKI HG-400 III [3]
