Eccentric Press FPA PMS 63 CP

Category Mechanical Presses FPA ›
Manufacturer FPA ›

ARCHIVED AD
Eccentric Press FPA PMS 63 CP was manufactured by the machine manufacturer FPA. Machine FPA PMS 63 CP was built in 1983 year.

General data

Location Poland
region Dolnośląskie
Year of manufacture 1983
Warranty Without warranty
Technical condition Good
Payment Before receipt
Transport The buyer organizes the transport at his own cost
Status A test can be performed

Technical parameters

Maximum force (pressing) 63 t
Length of the bottom working table 31.5 in
Width of the bottom working table 22 in
Throat depth (distance from the frame to the slider axis) 11 in
Minimum length of the slider stroke 0.314961 in
Maximum length of the slider stroke 4.3 in
Adjustment of the slider 4.3 in
Maximum distance between the table and the slider (at the lower position of the slider) 12.4 in
Distance between frames 15 in
Thickness of the bolster plate 3.5 in
Power demand 7.4 hp
Compressed air pressure 64 psi
Diameter of the hole in the working table 11 in
Diameter of the hole in the bolster plate 5.5 in
Machine height 104.3 in
Machine length 61 in
Machine width 55.1 in
Machine weight 6.2 t

Equipment

Foot control
Technical documentation
‹ previous JOTES SPA 25/63 BAOMA BMD 703 FPA PMS 63 CP PONAR TSB 20 BAYKAL APHS 3108 X 150 next ›