DOOSAN
Year of manufacture : 2009
CNC control model : FANUC
Length of the working table : 55.1 in
Width of the working table : 25.2 in
Travel length X-axis (mechanical feed) : 50 in
CNC control model : FANUC
Length of the working table : 55.1 in
Width of the working table : 25.2 in
Travel length X-axis (mechanical feed) : 50 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 2008
CNC control model : FANUC
Maximum turning length (Z-axis) : 84.8 in
Turning diameter over bed (max) : 30.3 in
Maximum travel length in the X-axis : 14.1 in
CNC control model : FANUC
Maximum turning length (Z-axis) : 84.8 in
Turning diameter over bed (max) : 30.3 in
Maximum travel length in the X-axis : 14.1 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2008
CNC control model : FANUC 18i-M
Maximum turning length (Z-axis) : 43.5 in
Turning diameter over bed (max) : 22 in
C-axis indexed
CNC control model : FANUC 18i-M
Maximum turning length (Z-axis) : 43.5 in
Turning diameter over bed (max) : 22 in
C-axis indexed
Netherlands
Gelderland
Gelderland
Year of manufacture : 2004
Maximum turning length (Z-axis) : 31.5 in
Maximum travel length in the X-axis : 10 in
Maximum travel length in the Y-axis : 4.7 in
Maximum power of the main spindle : 34.9 hp
Maximum turning length (Z-axis) : 31.5 in
Maximum travel length in the X-axis : 10 in
Maximum travel length in the Y-axis : 4.7 in
Maximum power of the main spindle : 34.9 hp
Netherlands
Gelderland
Gelderland
Year of manufacture : 1997
CNC control model : Fanuc OT
Maximum turning length (Z-axis) : 42.3 in
Turning diameter over bed (max) : 35.4 in
Maximum travel length in the X-axis : 14.6 in
CNC control model : Fanuc OT
Maximum turning length (Z-axis) : 42.3 in
Turning diameter over bed (max) : 35.4 in
Maximum travel length in the X-axis : 14.6 in
Netherlands
Year of manufacture : 1998
CNC control model : Fanuc 18-T
Maximum turning length (Z-axis) : 52.4 in
Turning diameter over bed (max) : 22.4 in
Maximum travel length in the X-axis : 11.1 in
CNC control model : Fanuc 18-T
Maximum turning length (Z-axis) : 52.4 in
Turning diameter over bed (max) : 22.4 in
Maximum travel length in the X-axis : 11.1 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 2008
CNC control model : 2008 DOOSAN LYNX 220LC - S/N: L2203136 1 2008 DOOSAN LYNX 220
CNC control model : 2008 DOOSAN LYNX 220LC - S/N: L2203136 1 2008 DOOSAN LYNX 220
9467 USD
United Kingdom
Year of manufacture : 2008
Travel length X-axis (mechanical feed) : 31.5 in
Travel length Y-axis (mechanical feed) : 25.6 in
Travel length Z-axis (mechanical feed) : 29.5 in
Travel length X-axis (mechanical feed) : 31.5 in
Travel length Y-axis (mechanical feed) : 25.6 in
Travel length Z-axis (mechanical feed) : 29.5 in
25000 USD
United States
California
California
Year of manufacture : 2007
CNC control model : FANUC 0i-TC
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 43.3 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : FANUC 0i-TC
Maximum turning length (Z-axis) : 39.4 in
Maximum turning diameter : 43.3 in
Maximum travel length in the X-axis : 22.8 in
United States
Colorado
Colorado
Year of manufacture : 1998
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2200 lb
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 2200 lb
United States
Colorado
Colorado
Year of manufacture : 2003
CNC control model : FANUC CNC CONTROL
CNC control model : FANUC CNC CONTROL
United States
California
California
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 20.5 in
Width of the working table : 53.2 in
Number of tools in the magazine : 24 pcs
CNC control model : FANUC 0i-MB
Length of the working table : 20.5 in
Width of the working table : 53.2 in
Number of tools in the magazine : 24 pcs
United States
California
California
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 53.1 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1870 lb
CNC control model : FANUC 0i-MB
Length of the working table : 53.1 in
Width of the working table : 20.5 in
Maximum table load (evenly distributed) : 1870 lb
United States
South Carolina
South Carolina
Year of manufacture : 2008
CNC control model : FANUC 21i-TB
Diameter of the table : 20 in
Total number of tools in the turret : 4 pcs
Number of CNC controlled axles : 3 pcs
CNC control model : FANUC 21i-TB
Diameter of the table : 20 in
Total number of tools in the turret : 4 pcs
Number of CNC controlled axles : 3 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Number of spindles : 2 pcs
Maximum power of the main spindle : 30 hp
Maximum rotary speed of the main spindle : 5000 rpm
CNC control model : FANUC 18i-TB
Number of spindles : 2 pcs
Maximum power of the main spindle : 30 hp
Maximum rotary speed of the main spindle : 5000 rpm
United States
Wisconsin
Wisconsin
Year of manufacture : 2008
CNC control model : FANUC 21i-MB
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 35 hp
CNC control model : FANUC 21i-MB
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 35 hp
United States
California
California
Year of manufacture : 2008
CNC control model : FANUC 21i-M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 25 hp
CNC control model : FANUC 21i-M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 25 hp
United States
California
California
Year of manufacture : 2008
CNC control model : FANUC 21i-M
Length of the working table : 25.6 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 660 lb
CNC control model : FANUC 21i-M
Length of the working table : 25.6 in
Width of the working table : 17.7 in
Maximum table load (evenly distributed) : 660 lb
United States
California
California
Year of manufacture : 2008
CNC control model : FA 21i-TB
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 15.7 in
Maximum travel length in the X-axis : 11.1 in
CNC control model : FA 21i-TB
Maximum turning length (Z-axis) : 24.8 in
Turning diameter over bed (max) : 15.7 in
Maximum travel length in the X-axis : 11.1 in
United States
California
California
Year of manufacture : 2007
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 31.5 in
Maximum travel length in the X-axis : 15.4 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 29.5 in
Maximum turning diameter : 31.5 in
Maximum travel length in the X-axis : 15.4 in
United States
California
California
Year of manufacture : 2006
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 33.5 in
Maximum turning diameter : 39.4 in
Maximum travel length in the X-axis : 18.5 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 33.5 in
Maximum turning diameter : 39.4 in
Maximum travel length in the X-axis : 18.5 in
United States
California
California
Year of manufacture : 2007
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
United States
California
California
Year of manufacture : 1999
CNC control model : OKUMA OSP CONTROL
Maximum turning length (Z-axis) : 36.3 in
Turning diameter over bed (max) : 13.8 in
Subspindle
CNC control model : OKUMA OSP CONTROL
Maximum turning length (Z-axis) : 36.3 in
Turning diameter over bed (max) : 13.8 in
Subspindle
United States
California
California
Year of manufacture : 2007
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
Maximum turning length (Z-axis) : 29.9 in
Maximum turning diameter : 29.1 in
Maximum travel length in the X-axis : 15 in
Maximum feed rate in X-axis : 787 in/min
United States
California
California
Year of manufacture : 2007
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 20.1 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 20.1 in
Turning diameter over bed (max) : 23.6 in
Turning diameter over cross slide (max) : 21.7 in
United States
California
California
Year of manufacture : 2009
CNC control model : FANUC CNC CONTROL
Maximum turning length (Z-axis) : 81.7 in
Turning diameter over bed (max) : 30.3 in
Turning diameter over cross slide (max) : 21.7 in
CNC control model : FANUC CNC CONTROL
Maximum turning length (Z-axis) : 81.7 in
Turning diameter over bed (max) : 30.3 in
Turning diameter over cross slide (max) : 21.7 in
United States
Florida
Florida
Year of manufacture : 2007
CNC control model : FANUC Oi-TB
Diameter of the table : 32 in
Maximum turning diameter : 50 in
Maximum height of the workpiece : 39.4 in
CNC control model : FANUC Oi-TB
Diameter of the table : 32 in
Maximum turning diameter : 50 in
Maximum height of the workpiece : 39.4 in
United States
Florida
Florida
Year of manufacture : 2007
CNC control model : FANUC 18i-MB
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
CNC control model : FANUC 18i-MB
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : FANUC 21i-TB
Diameter of the table : 40 in
Maximum turning diameter : 50 in
Maximum height of the workpiece : 39.4 in
CNC control model : FANUC 21i-TB
Diameter of the table : 40 in
Maximum turning diameter : 50 in
Maximum height of the workpiece : 39.4 in
United States
New York
New York
Year of manufacture : 1999
CNC control model : FANUC 32i-A
Maximum turning length (Z-axis) : 63 in
Turning diameter over bed (max) : 40.5 in
Turning diameter over cross slide (max) : 31.5 in
CNC control model : FANUC 32i-A
Maximum turning length (Z-axis) : 63 in
Turning diameter over bed (max) : 40.5 in
Turning diameter over cross slide (max) : 31.5 in
United States
New York
New York
Lathes DOOSAN
Lathes DOOSAN PUMA 300LC [1]Lathes DOOSAN LYNX 220LC [1]
CNC Lathes and Turning Centers DOOSAN
CNC Lathes and Turning Centers DOOSAN PUMA 2600 B [4]CNC Lathes and Turning Centers DOOSAN PUMA TT 1800 SY [3]
CNC Milling Machines and Machining Centers DOOSAN
CNC Milling Machines and Machining Centers DOOSAN HM 1250 [5]CNC Milling Machines and Machining Centers DOOSAN Lynx 220 Lc [3]
Boring Machines DOOSAN
Boring Machines DOOSAN DBC 130 [4]Boring Machines DOOSAN DB 130-CX [2]
Industrial Robots DOOSAN
Industrial Robots DOOSAN M0617 [1]Forklifts DOOSAN
Forklifts DOOSAN B25X-7 [1]
