- UniMachines
- ›
- CNC Lathes and Turning Centers
- ›
- CNC Lathes
- ›
- CNC Lathes MAX MUELLER
- ›
- CNC Lathes MAX MUELLER MD5 SHAFT
CNC Lathe MAX MUELLER MD5 SHAFT
CNC Lathe MAX MUELLER MD5 SHAFT was manufactured by the machine manufacturer MAX MUELLER. Machine MAX MUELLER MD5 SHAFT was built in 1992 year.
General data | |
|---|---|
| Location | Turkey |
| region | İzmir |
| Year of manufacture | 1992 |
| Warranty | Without warranty |
| Technical condition | Sufficient |
| Loading | The seller organizes the loading - paid separately |
| Payment | At receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum turning length (Z-axis) | 78.7 in |
| Turning diameter over bed (max) | 235 in |
| Turning diameter over cross slide (max) | 23.8 in |
| Maximum travel length in the X-axis | 245 in |
| Maximum feed rate in X-axis | 196.9 in/min |
| Maximum feed rate in Z-axis | 196.9 in/min |
| Number of spindles | 2 pcs |
| Maximum power of the main spindle | 91.2 hp |
| Diameter of the spindle bore | 100 in |
| Minimum rotary speed of the main spindle | 28 rpm |
| Maximum rotary speed of the main spindle | 4000 rpm |
| Number of tool turrets | 2 pcs |
| Total number of tools in the turret | 12 pcs |
| Number of CNC controlled axles | 6 pcs |
| Number of synchronous axles | 4 pcs |
| Total power demand | 214.5 hp |
| Length of the lathe | 291.3 in |
| Width of the lathe | 1090.6 in |
| Height of the lathe | 94.5 in |
| Weight of the lathe | 11 short ton |
Equipment | |
|---|---|
| Heidenhein Eltropilot | |
| CNC technology cycles | |
| Linear encoders in the X-axis | |
| Z-axis linear motor | |
| X-axis linear motor | |
| Subspindle | |
| Spindle with a through hole | |
| Hydraulic chuck | |
| Liquid cooling system | |
| Technical documentation | |
