- UniMachines
- ›
- CNC Lathes and Turning Centers
- ›
- CNC Lathes
- ›
- CNC Lathes DOOSAN
- ›
- CNC Lathes DOOSAN PUMA 300 LC
CNC Lathe DOOSAN PUMA 300 LC
CNC Lathe DOOSAN PUMA 300 LC was manufactured by the machine manufacturer DOOSAN. Machine DOOSAN PUMA 300 LC was built in 2012 year.
General data | |
|---|---|
| Location | United States |
| region | Wisconsin |
| Year of manufacture | 2012 |
| Warranty | Without warranty |
| Technical condition | Very good |
| Loading | The seller organizes the loading - included in the price of the machine |
| Payment | Before receipt |
| Transport | The seller organizes the transport at a surcharge |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum turning length (Z-axis) | 50.4 in |
| Turning diameter over bed (max) | 15.7 in |
| Turning diameter over cross slide (max) | 15.7 in |
| Maximum travel length in the X-axis | 11.1 in |
| Maximum feed rate in X-axis | 787 in/min |
| Maximum feed rate in Z-axis | 787 in/min |
| Number of spindles | 1 pcs |
| Maximum power of the main spindle | 30 hp |
| Diameter of the spindle bore | 4 in |
| Minimum rotary speed of the main spindle | 20 rpm |
| Maximum rotary speed of the main spindle | 2800 rpm |
| Number of tool turrets | 1 pcs |
| Total number of tools in the turret | 12 pcs |
| Maximum travel length of the tailstock quill | 6.9 in |
| Number of CNC controlled axles | 2 pcs |
| Number of synchronous axles | 2 pcs |
| Total power demand | 30 hp |
| Weight of the lathe | 14.9 short ton |
Equipment | |
|---|---|
| FANUC SERIES i Liquid Crys | |
| Electronic wheel for manual operation | |
| RS connection | |
| Chip transporter | |
| Spindle with a through hole | |
| Automatic feed rate of tailstock quill | |
| Hydraulic chuck | |
| Liquid cooling system | |
| Technical documentation | |
| CE Declaration | |
