CHEVALIER
Year of manufacture : 2001
CNC control model : SIEMENS 810D Manual Turn
Maximum turning length (Z-axis) : 118.1 in
Turning diameter over bed (max) : 32.1 in
Turning diameter over cross slide (max) : 18.1 in
CNC control model : SIEMENS 810D Manual Turn
Maximum turning length (Z-axis) : 118.1 in
Turning diameter over bed (max) : 32.1 in
Turning diameter over cross slide (max) : 18.1 in
Netherlands
Gelderland
Gelderland
Year of manufacture : 1991
Maximum machining current : 50 A
Length of the table : 27.2 in
Width of the table : 15.4 in
Maximum travel length X-axis : 15.8 in
Maximum machining current : 50 A
Length of the table : 27.2 in
Width of the table : 15.4 in
Maximum travel length X-axis : 15.8 in
4500 USD
United States
Maryland
Maryland
Year of manufacture : 1996
Length of the working table : 42 in
Width of the working table : 9 in
Power of the spindle drive : 3 hp
Minimum rotary speed of the spindle : 60 1/min
Length of the working table : 42 in
Width of the working table : 9 in
Power of the spindle drive : 3 hp
Minimum rotary speed of the spindle : 60 1/min
United States
Minnesota
Minnesota
Year of manufacture : 1995
Length of the working table : 16 in
Width of the working table : 40 in
Maximum length of grinding (without the grinding wheel output) X-axis : 43 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 18 in
Length of the working table : 16 in
Width of the working table : 40 in
Maximum length of grinding (without the grinding wheel output) X-axis : 43 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 18 in
22500 USD
United States
California
California
Year of manufacture : 2001
CNC control model : ANILAM 4200 T-PLUS
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 14.5 in
CNC control model : ANILAM 4200 T-PLUS
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 14.5 in
United States
South Carolina
South Carolina
Year of manufacture : 2001
CNC control model : FAGOR CNC CONTROL
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 18.1 in
Maximum travel length in the X-axis : 11 in
CNC control model : FAGOR CNC CONTROL
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 18.1 in
Maximum travel length in the X-axis : 11 in
United States
South Carolina
South Carolina
Year of manufacture : 1988
Length of the working table : 18 in
Width of the working table : 8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 18 in
Power of the spindle drive : 2 hp
Length of the working table : 18 in
Width of the working table : 8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 18 in
Power of the spindle drive : 2 hp
11500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2002
CNC control model : FANUC O-MD
Length of the working table : 47.2 in
Width of the working table : 17.7 in
Power of the spindle drive : 15 hp
CNC control model : FANUC O-MD
Length of the working table : 47.2 in
Width of the working table : 17.7 in
Power of the spindle drive : 15 hp
United States
Florida
Florida
Year of manufacture : 1996
Length of the working table : 18 in
Width of the working table : 5.8 in
Power of the spindle drive : 2.2 hp
Maximum rotary speed of the spindle : 3450 1/min
Length of the working table : 18 in
Width of the working table : 5.8 in
Power of the spindle drive : 2.2 hp
Maximum rotary speed of the spindle : 3450 1/min
United States
Florida
Florida
Year of manufacture : 1990
Length of the working table : 39.4 in
Width of the working table : 15.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Power of the spindle drive : 5 hp
Length of the working table : 39.4 in
Width of the working table : 15.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Power of the spindle drive : 5 hp
United States
New York
New York
Year of manufacture : 1998
Length of the working table : 31.5 in
Width of the working table : 15.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Power of the spindle drive : 5 hp
Length of the working table : 31.5 in
Width of the working table : 15.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Power of the spindle drive : 5 hp
United States
New York
New York
Year of manufacture : 1993
CNC control model : PROTO TRAK MX 2
Length of the working table : 50 in
Width of the working table : 10 in
Power of the spindle drive : 3 hp
CNC control model : PROTO TRAK MX 2
Length of the working table : 50 in
Width of the working table : 10 in
Power of the spindle drive : 3 hp
United States
Ohio
Ohio
Year of manufacture : 1996
Length of the working table : 24 in
Width of the working table : 12 in
Power of the spindle drive : 5 hp
Maximum distance from the table to the spindle axis : 24.8 in
Length of the working table : 24 in
Width of the working table : 12 in
Power of the spindle drive : 5 hp
Maximum distance from the table to the spindle axis : 24.8 in
United States
Illinois
Illinois
Year of manufacture : 1990
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Power of the spindle drive : 5 hp
Maximum distance from the table to the spindle axis : 19.8 in
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Power of the spindle drive : 5 hp
Maximum distance from the table to the spindle axis : 19.8 in
United States
Illinois
Illinois
Year of manufacture : 1990
Length of the working table : 25.6 in
Width of the working table : 11.8 in
Power of the spindle drive : 5 hp
Maximum diameter of a grinding wheel : 14 in
Length of the working table : 25.6 in
Width of the working table : 11.8 in
Power of the spindle drive : 5 hp
Maximum diameter of a grinding wheel : 14 in
United States
Illinois
Illinois
Year of manufacture : 1989
Length of the working table : 20 in
Width of the working table : 10 in
Power of the spindle drive : 3 hp
Maximum distance from the table to the spindle axis : 21.5 in
Length of the working table : 20 in
Width of the working table : 10 in
Power of the spindle drive : 3 hp
Maximum distance from the table to the spindle axis : 21.5 in
United States
Illinois
Illinois
Year of manufacture : 1994
Length of the working table : 32 in
Width of the working table : 16 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Power of the spindle drive : 5 hp
Length of the working table : 32 in
Width of the working table : 16 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Power of the spindle drive : 5 hp
United States
Illinois
Illinois
Year of manufacture : 2000
Maximum length of the grinding (shaft) : 59 in
Maximum diameter of the grinding (shaft) : 14.9 in
Maximum weight of the shaft between the centers : 330 lb
Power of the grinding wheel spindle drive : 5 hp
Maximum length of the grinding (shaft) : 59 in
Maximum diameter of the grinding (shaft) : 14.9 in
Maximum weight of the shaft between the centers : 330 lb
Power of the grinding wheel spindle drive : 5 hp
United States
Illinois
Illinois
Year of manufacture : 1998
Length of the working table : 39.4 in
Width of the working table : 19.6 in
Power of the spindle drive : 7.5 hp
Maximum rotary speed of the spindle : 1740 1/min
Length of the working table : 39.4 in
Width of the working table : 19.6 in
Power of the spindle drive : 7.5 hp
Maximum rotary speed of the spindle : 1740 1/min
United States
Illinois
Illinois
Year of manufacture : 2004
CNC control model : FAGOR UC 800 TG-I
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 18.1 in
Maximum travel length in the X-axis : 11 in
CNC control model : FAGOR UC 800 TG-I
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 18.1 in
Maximum travel length in the X-axis : 11 in
United States
Illinois
Illinois
Year of manufacture : 2014
CNC control model : CHEVALIER
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Diameter of a new grinding wheel : 14 in
CNC control model : CHEVALIER
Length of the working table : 23.6 in
Width of the working table : 11.8 in
Diameter of a new grinding wheel : 14 in
Czech Republic
Jihomoravský kraj
Jihomoravský kraj
Year of manufacture : 1998
Length of the working table : 13.8 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Minimum longitudinal feed rate (Z-axis) : 196.9 in/min
Length of the working table : 13.8 in
Width of the working table : 7.9 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 13.8 in
Minimum longitudinal feed rate (Z-axis) : 196.9 in/min
8023 USD
France
Bas-Rhin
Bas-Rhin
Year of manufacture : 1990
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Permanent magnetic chuck
Tilting magnetic chuck
Length of the working table : 39.4 in
Width of the working table : 17.7 in
Permanent magnetic chuck
Tilting magnetic chuck
France
Seine-Saint-Denis
Seine-Saint-Denis
Year of manufacture : 1996
Maximum height of the grinded workpieces (for a new grinding wheel) : 18 in
Maximum length of grinding (without the grinding wheel output) X-axis : 18 in
Diameter of a new grinding wheel : 8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 18 in
Maximum length of grinding (without the grinding wheel output) X-axis : 18 in
Diameter of a new grinding wheel : 8 in
Spain
Year of manufacture : 2003
CNC control model : SIEMENS SINUMERIK 810 D
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 9.1 in
CNC control model : SIEMENS SINUMERIK 810 D
Maximum turning length (Z-axis) : 35.4 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 9.1 in
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 2004
CNC control model : SIEMENS SINUMERIK 810 D MANU
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 9.1 in
CNC control model : SIEMENS SINUMERIK 810 D MANU
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 9.1 in
Germany
Bayern
Bayern
Year of manufacture : 1998
CNC control model : FAGOR 800 T
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 14.6 in
Maximum power of the main spindle : 26.8 hp
CNC control model : FAGOR 800 T
Maximum turning length (Z-axis) : 60 in
Turning diameter over bed (max) : 14.6 in
Maximum power of the main spindle : 26.8 hp
Germany
Baden-Württemberg
Baden-Württemberg
Year of manufacture : 1992
Length of the working table : 18 in
Width of the working table : 6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 18 in
Maximum length of grinding (without the grinding wheel output) X-axis : 19 in
Length of the working table : 18 in
Width of the working table : 6 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 18 in
Maximum length of grinding (without the grinding wheel output) X-axis : 19 in
Canada
Year of manufacture : 1985
Length of the working table : 31.5 in
Width of the working table : 15.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Maximum rotary speed of the spindle : 1750 1/min
Length of the working table : 31.5 in
Width of the working table : 15.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.4 in
Maximum rotary speed of the spindle : 1750 1/min
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1995
Length of the working table : 78.7 in
Width of the working table : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 33.5 in
Power of the spindle drive : 32.2 hp
Length of the working table : 78.7 in
Width of the working table : 24 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 33.5 in
Power of the spindle drive : 32.2 hp
Netherlands
Noord-Brabant
Noord-Brabant
CNC Lathes and Turning Centers CHEVALIER
CNC Lathes and Turning Centers CHEVALIER FCL-1840 [2]CNC Lathes and Turning Centers CHEVALIER FCL-2460 [2]
Milling Machines CHEVALIER
Milling Machines CHEVALIER FM-3VS [1]CNC Milling Machines and Machining Centers CHEVALIER
CNC Milling Machines and Machining Centers CHEVALIER VMC 4020 [1]CNC Milling Machines and Machining Centers CHEVALIER FALCON FM-3 VKH [1]
Grinding Machines CHEVALIER
Grinding Machines CHEVALIER FSG-1640 AD [3]Grinding Machines CHEVALIER FSG-1224 AD [3]
Electrical Discharge Machines CHEVALIER
Electrical Discharge Machines CHEVALIER DM 422 [1]
