Bench Lathe LACFER CR 1-250
Bench Lathe LACFER CR 1-250 was manufactured by the machine manufacturer LACFER. Machine LACFER CR 1-250 was built in 2015 year.
General data | |
|---|---|
| Location | Spain |
| Year of manufacture | 2015 |
| Warranty | Warranty for 12 months |
| Technical condition | Unused |
| Loading | The buyer organizes the loading at his own cost |
| Payment | Payment in installments |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum length of the turning | 0.03937 in |
| Turning diameter over bed (max) | 19.7 in |
| Turning diameter over cross slide (max) | 12.8 in |
| Turning diameter in gap | 29.1 in |
| Spindle bore | 2.4 in |
| Power of the spindle | 7.5 hp |
| Length of the lathe | 0.090551 in |
| Width of the lathe | 0.041339 in |
| Height of the lathe | 0.049213 in |
| Weight of the lathe | 0.002094 short ton |
Equipment | |
|---|---|
| Hardened guideways | |
| Rapid feed | |
| 3-jaw chuck | |
| 4-jaw chuck | |
| Hydraulic chuck | |
| Steady rest | |
| Follower rest | |
| Tool post grinder (external) | |
| Tool post grinder (internal) | |
| 4-way tool post | |
| Technical documentation | |
| CE Declaration | |
