OKUMA
Year of manufacture : 2009
CNC control model : OSP 100 M
Length of the working table : 48 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OSP 100 M
Length of the working table : 48 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Colorado
Colorado
Year of manufacture : 2010
CNC control model : OSP P 200 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : OSP P 200 M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1760 lb
United States
Colorado
Colorado
Year of manufacture : 2012
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 35 in
Maximum turning diameter : 49.2 in
Maximum travel length in the X-axis : 33.1 in
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 35 in
Maximum turning diameter : 49.2 in
Maximum travel length in the X-axis : 33.1 in
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : OSP P 200 M
Length of the working table : 86.6 in
Width of the working table : 33.5 in
Number of tools in the magazine : 36 pcs
CNC control model : OSP P 200 M
Length of the working table : 86.6 in
Width of the working table : 33.5 in
Number of tools in the magazine : 36 pcs
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 31i
Length of the working table : 126 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Colorado
Colorado
Year of manufacture : 2008
CNC control model : OKUMA P 2000 L
Maximum turning length (Z-axis) : 29.5 in
Turning diameter over cross slide (max) : 23.6 in
Maximum travel length in the X-axis : 19.7 in
CNC control model : OKUMA P 2000 L
Maximum turning length (Z-axis) : 29.5 in
Turning diameter over cross slide (max) : 23.6 in
Maximum travel length in the X-axis : 19.7 in
United States
Colorado
Colorado
Year of manufacture : 2009
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 37.2 in
Turning diameter over bed (max) : 24.8 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 37.2 in
Turning diameter over bed (max) : 24.8 in
Maximum travel length in the X-axis : 22.8 in
184000 USD
United States
California
California
Year of manufacture : 2010
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OSP P 200 L
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 16.5 in
United States
South Carolina
South Carolina
Year of manufacture : 2008
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.8 in
Maximum travel length in the X-axis : 10.2 in
CNC control model : OSP P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 20.8 in
Maximum travel length in the X-axis : 10.2 in
United States
South Carolina
South Carolina
Year of manufacture : 2012
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
CNC control model : OKUMA OSP-P 200
Maximum turning length (Z-axis) : 20.5 in
Turning diameter over bed (max) : 22.8 in
Maximum power of the main spindle : 30 hp
United States
New York
New York
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
CNC control model : OKUMA OSP-P 200 L
Diameter of the table : 82.7 in
Maximum turning diameter : 78.7 in
Maximum height of the workpiece : 55.1 in
United States
Georgia
Georgia
Year of manufacture : 2012
CNC control model : OKUMA OSP-200 L
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 26.4 in
Turning diameter over cross slide (max) : 18.9 in
CNC control model : OKUMA OSP-200 L
Maximum turning length (Z-axis) : 59.1 in
Turning diameter over bed (max) : 26.4 in
Turning diameter over cross slide (max) : 18.9 in
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 43.3 in
Turning diameter over bed (max) : 20.5 in
Turning diameter over cross slide (max) : 11.8 in
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 7.9 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 15.8 in
Maximum power of the main spindle : 15 hp
CNC control model : OKUMA CNC CONTROL
Maximum turning length (Z-axis) : 59 in
Turning diameter over bed (max) : 15.8 in
Maximum power of the main spindle : 15 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2010
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 60.2 in
Width of the working table : 25.9 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2012
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
CNC control model : OKUMA OSP-E 200 M
Length of the working table : 51.2 in
Width of the working table : 22.1 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 2013
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA CNC CONTROL
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2008
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP-200 M
Length of the working table : 48.4 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2011
CNC control model : FANUC 31-A
Diameter of the table : 35.8 in
Maximum turning diameter : 31.5 in
Minimum table rotary speed : 13 rpm
CNC control model : FANUC 31-A
Diameter of the table : 35.8 in
Maximum turning diameter : 31.5 in
Minimum table rotary speed : 13 rpm
United States
Florida
Florida
Year of manufacture : 2011
CNC control model : OKUMA OSP P 200 LA
Maximum turning length (Z-axis) : 26 in
Maximum turning diameter : 24 in
Maximum feed rate in X-axis : 945 in/min
CNC control model : OKUMA OSP P 200 LA
Maximum turning length (Z-axis) : 26 in
Maximum turning diameter : 24 in
Maximum feed rate in X-axis : 945 in/min
United States
New York
New York
Year of manufacture : 2008
CNC control model : OKUMA 200 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.8 in
Turning diameter over cross slide (max) : 16.5 in
CNC control model : OKUMA 200 L
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 20.8 in
Turning diameter over cross slide (max) : 16.5 in
United States
New York
New York
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 35.4 in
Maximum turning diameter : 17.7 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 35.4 in
Maximum turning diameter : 17.7 in
Maximum travel length in the X-axis : 22.8 in
United States
Michigan
Michigan
Year of manufacture : 2013
CNC control model : OKUMA OSP- P 300 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : OKUMA OSP- P 300 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
CNC control model : OKUMA OSP U 10 L
Maximum turning length (Z-axis) : 12.6 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 11.8 in
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 17.7 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 37.8 in
Turning diameter over cross slide (max) : 17.7 in
Maximum travel length in the X-axis : 22.8 in
United States
Ohio
Ohio
Year of manufacture : 2008
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 19.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : OKUMA OSP-P 200 L
Maximum turning length (Z-axis) : 19.6 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 14.6 in
United States
Illinois
Illinois
Lathes OKUMA
Lathes OKUMA V80R [1]Lathes OKUMA SIMULTURN LU-300MY [1]
CNC Lathes and Turning Centers OKUMA
CNC Lathes and Turning Centers OKUMA LB 15 [4]CNC Lathes and Turning Centers OKUMA LB-25 [3]
Milling Machines OKUMA
Milling Machines OKUMA 5VS-NC [1]Milling Machines OKUMA 6VAE [1]
CNC Milling Machines and Machining Centers OKUMA
CNC Milling Machines and Machining Centers OKUMA MC-V 4020 [6]CNC Milling Machines and Machining Centers OKUMA MX 45 VAE [4]
Grinding Machines OKUMA
Grinding Machines OKUMA GI-5 N [1]Grinding Machines OKUMA GP-26 T X 65 [1]
