MAZAK / page 8
Yamazaki Mazak Corporation
Year of manufacture : 2003
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 19.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 661.4 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 19.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 661.4 lb
France
Isère
Isère
Year of manufacture : 2008
CNC control model : MAZAK MATRIX
Length of the working table : 137.8 in
Width of the working table : 32.3 in
Maximum table load (evenly distributed) : 5511.6 lb
CNC control model : MAZAK MATRIX
Length of the working table : 137.8 in
Width of the working table : 32.3 in
Maximum table load (evenly distributed) : 5511.6 lb
France
Isère
Isère
Year of manufacture : 2007
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2007
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 6613.9 lb
France
Isère
Isère
Year of manufacture : 2006
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 21.2 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2006
CNC control model : MAZAK MATRIX
Diameter of the table : 39.4 in
Maximum turning diameter : 49.2 in
Maximum height of the workpiece : 49.2 in
CNC control model : MAZAK MATRIX
Diameter of the table : 39.4 in
Maximum turning diameter : 49.2 in
Maximum height of the workpiece : 49.2 in
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK PC FUSION
Maximum turning length (Z-axis) : 40 in
Maximum turning diameter : 26 in
Maximum feed rate in X-axis : 1496.1 in/min
CNC control model : MAZAK PC FUSION
Maximum turning length (Z-axis) : 40 in
Maximum turning diameter : 26 in
Maximum feed rate in X-axis : 1496.1 in/min
France
Isère
Isère
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 13 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 11 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 13 in
Turning diameter over bed (max) : 21.7 in
Turning diameter over cross slide (max) : 11 in
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 88.2 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 5511.6 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 88.2 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 5511.6 lb
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 41.1 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 41.1 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK PC FUSION 640 MT PRO
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 29.9 in
Maximum travel length in the X-axis : 24.8 in
CNC control model : MAZAK PC FUSION 640 MT PRO
Maximum turning length (Z-axis) : 59.1 in
Maximum turning diameter : 29.9 in
Maximum travel length in the X-axis : 24.8 in
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 12.2 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 39.4 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 12.2 in
France
Isère
Isère
Year of manufacture : 2008
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 17.9 in
Turning diameter over bed (max) : 11 in
Maximum travel length in the X-axis : 7.3 in
CNC control model : MAZAK MATRIX
Maximum turning length (Z-axis) : 17.9 in
Turning diameter over bed (max) : 11 in
Maximum travel length in the X-axis : 7.3 in
France
Isère
Isère
Year of manufacture : 1999
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
CNC control model : MAZAK MAZATROL M PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1763.7 lb
France
Isère
Isère
Year of manufacture : 2005
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 881.8 lb
CNC control model : MAZAK MAZATROL PC FUSION 6
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 881.8 lb
France
Isère
Isère
Year of manufacture : 2004
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZAK MAZATROL PC FUSION
Maximum turning length (Z-axis) : 19.7 in
Turning diameter over bed (max) : 26.6 in
Turning diameter over cross slide (max) : 13.8 in
France
Isère
Isère
Year of manufacture : 1990
CNC control model : MAZAK MAZATROL T 32/2
Maximum turning length (Z-axis) : 11.2 in
Turning diameter over bed (max) : 11.8 in
Turning diameter over cross slide (max) : 6.3 in
CNC control model : MAZAK MAZATROL T 32/2
Maximum turning length (Z-axis) : 11.2 in
Turning diameter over bed (max) : 11.8 in
Turning diameter over cross slide (max) : 6.3 in
France
Isère
Isère
Year of manufacture : 2001
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 7.7 in
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 5.1 in
CNC control model : MAZAK MAZATROL PC FUSION 6
Maximum turning length (Z-axis) : 7.7 in
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 5.1 in
France
Isère
Isère
Year of manufacture : 1998
CNC control model : EIA CNC CONTROL
Maximum turning length (Z-axis) : 7.7 in
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 5.1 in
CNC control model : EIA CNC CONTROL
Maximum turning length (Z-axis) : 7.7 in
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 5.1 in
France
Isère
Isère
Year of manufacture : 1998
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.5 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 21 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 7.5 in
France
Isère
Isère
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 37 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 1102.3 lb
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 37 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 1102.3 lb
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 2000
CNC control model : MAZATROL PC FUSION 640 T
Turning diameter over bed (max) : 13.8 in
Diameter of the spindle bore : 3 in
Maximum rotary speed of the main spindle : 5000 rpm
CNC control model : MAZATROL PC FUSION 640 T
Turning diameter over bed (max) : 13.8 in
Diameter of the spindle bore : 3 in
Maximum rotary speed of the main spindle : 5000 rpm
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1990
CNC control model : MAZAK MAZATROL T 32-3
Turning diameter over bed (max) : 11.8 in
Turning diameter over cross slide (max) : 6.3 in
Maximum feed rate in X-axis : 1181.1 in/min
CNC control model : MAZAK MAZATROL T 32-3
Turning diameter over bed (max) : 11.8 in
Turning diameter over cross slide (max) : 6.3 in
Maximum feed rate in X-axis : 1181.1 in/min
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1990
CNC control model : MAZAK MAZATROL T 32-3
Diameter of the table : 49.2 in
Maximum turning diameter : 57.1 in
Maximum height of the workpiece : 52.2 in
CNC control model : MAZAK MAZATROL T 32-3
Diameter of the table : 49.2 in
Maximum turning diameter : 57.1 in
Maximum height of the workpiece : 52.2 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1990
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2204.6 lb
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 2204.6 lb
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1982
CNC control model : FANUC 6 M
Length of the working table : 48.8 in
Width of the working table : 19.7 in
Travel length X-axis (mechanical feed) : 49.2 in
CNC control model : FANUC 6 M
Length of the working table : 48.8 in
Width of the working table : 19.7 in
Travel length X-axis (mechanical feed) : 49.2 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 48.8 in
Width of the working table : 21.7 in
Number of tools in the magazine : 60 pcs
CNC control model : MAZAK MAZATROL M 32
Length of the working table : 48.8 in
Width of the working table : 21.7 in
Number of tools in the magazine : 60 pcs
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1990
CNC control model : MAZAK MAZATROL T 32-6
Maximum turning length (Z-axis) : 46.5 in
Turning diameter over bed (max) : 15.4 in
Maximum travel length in the X-axis : 8.3 in
CNC control model : MAZAK MAZATROL T 32-6
Maximum turning length (Z-axis) : 46.5 in
Turning diameter over bed (max) : 15.4 in
Maximum travel length in the X-axis : 8.3 in
Netherlands
Noord-Brabant
Noord-Brabant
Year of manufacture : 1997
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 46.5 in
Turning diameter over bed (max) : 15.4 in
Turning diameter over cross slide (max) : 10.2 in
CNC control model : MAZAK MAZATROL T PLUS
Maximum turning length (Z-axis) : 46.5 in
Turning diameter over bed (max) : 15.4 in
Turning diameter over cross slide (max) : 10.2 in
Netherlands
Noord-Brabant
Noord-Brabant
CNC Lathes and Turning Centers MAZAK
CNC Lathes and Turning Centers MAZAK INTEGREX 300 Y [2]CNC Lathes and Turning Centers MAZAK QTN 200-II MS [2]
CNC Milling Machines and Machining Centers MAZAK
CNC Milling Machines and Machining Centers MAZAK AJV-35/80 [3]CNC Milling Machines and Machining Centers MAZAK VCU 400 B [2]
Lasers MAZAK
Lasers MAZAK STX510 HYBRID [1]Lasers MAZAK X 48 CHAMPION [1]
