MAZAK / page 2
Yamazaki Mazak Corporation
Year of manufacture : 1998
CNC control model : MAZATROL T-PLUS
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 11.8 in
Maximum feed rate in X-axis : 1200 in/min
CNC control model : MAZATROL T-PLUS
Turning diameter over bed (max) : 17.3 in
Turning diameter over cross slide (max) : 11.8 in
Maximum feed rate in X-axis : 1200 in/min
United States
Minnesota
Minnesota
Year of manufacture : 2003
CNC control model : MAZATROL 640 MT
Maximum turning length (Z-axis) : 40 in
Turning diameter over bed (max) : 26 in
Maximum travel length in the X-axis : 22.8 in
CNC control model : MAZATROL 640 MT
Maximum turning length (Z-axis) : 40 in
Turning diameter over bed (max) : 26 in
Maximum travel length in the X-axis : 22.8 in
United States
California
California
Year of manufacture : 1996
CNC control model : MAZATROL M-PLUS
Length of the working table : 78.7 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 2160 lb
CNC control model : MAZATROL M-PLUS
Length of the working table : 78.7 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 2160 lb
United States
California
California
Year of manufacture : 2000
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
United States
California
California
Year of manufacture : 2004
CNC control model : MAZATROL 640
Length of the working table : 16 in
Width of the working table : 16 in
Power of the spindle drive : 40 hp
CNC control model : MAZATROL 640
Length of the working table : 16 in
Width of the working table : 16 in
Power of the spindle drive : 40 hp
United States
California
California
Year of manufacture : 2000
CNC control model : MAZATROL 640 MT
Maximum turning length (Z-axis) : 30.9 in
Turning diameter over bed (max) : 18.5 in
Maximum travel length in the X-axis : 14.2 in
CNC control model : MAZATROL 640 MT
Maximum turning length (Z-axis) : 30.9 in
Turning diameter over bed (max) : 18.5 in
Maximum travel length in the X-axis : 14.2 in
74500 USD
United States
California
California
Year of manufacture : 2008
CNC control model : MAZATROL NEXUS
Maximum turning length (Z-axis) : 20.3 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZATROL NEXUS
Maximum turning length (Z-axis) : 20.3 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.8 in
80500 USD
United States
California
California
Year of manufacture : 2007
CNC control model : MAZATROL MATRIX
Length of the working table : 16 in
Width of the working table : 24.5 in
Maximum table load (evenly distributed) : 882 lb
CNC control model : MAZATROL MATRIX
Length of the working table : 16 in
Width of the working table : 24.5 in
Maximum table load (evenly distributed) : 882 lb
160000 USD
United States
California
California
Year of manufacture : 1996
CNC control model : MAZATROL M-PLUS
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 4840 lb
CNC control model : MAZATROL M-PLUS
Length of the working table : 31.5 in
Width of the working table : 31.5 in
Maximum table load (evenly distributed) : 4840 lb
United States
New York
New York
Year of manufacture : 1999
CNC control model : MAZATROL PC-FUSION 640 M
Length of the working table : 57.5 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 1600 lb
CNC control model : MAZATROL PC-FUSION 640 M
Length of the working table : 57.5 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 1600 lb
United States
New York
New York
Year of manufacture : 2000
CNC control model : MAZATROL PC-FUSION 640 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
CNC control model : MAZATROL PC-FUSION 640 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 880 lb
United States
New York
New York
Year of manufacture : 2010
CNC control model : MAZATROL MATRIX II NEXUS
Maximum turning length (Z-axis) : 43.5 in
Turning diameter over bed (max) : 33.3 in
Maximum travel length in the X-axis : 13.4 in
CNC control model : MAZATROL MATRIX II NEXUS
Maximum turning length (Z-axis) : 43.5 in
Turning diameter over bed (max) : 33.3 in
Maximum travel length in the X-axis : 13.4 in
United States
South Carolina
South Carolina
Year of manufacture : 2010
CNC control model : MAZATROL MATRIX NEXUS
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1542 lb
CNC control model : MAZATROL MATRIX NEXUS
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1542 lb
United States
South Carolina
South Carolina
Year of manufacture : 2007
CNC control model : MAZATROL MATRIX NEXUS
Length of the working table : 51.2 in
Width of the working table : 41.3 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : MAZATROL MATRIX NEXUS
Length of the working table : 51.2 in
Width of the working table : 41.3 in
Maximum table load (evenly distributed) : 2640 lb
United States
South Carolina
South Carolina
Year of manufacture : 2006
CNC control model : MAZATROL MATRIX
Maximum turning length (Z-axis) : 43.1 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : MAZATROL MATRIX
Maximum turning length (Z-axis) : 43.1 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13.8 in
United States
South Carolina
South Carolina
Year of manufacture : 1999
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 47.2 in
Width of the working table : 21.7 in
Maximum table load (evenly distributed) : 2640 lb
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 47.2 in
Width of the working table : 21.7 in
Maximum table load (evenly distributed) : 2640 lb
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : MAZATROL T-PLUS
Maximum turning length (Z-axis) : 61.3 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 16.9 in
CNC control model : MAZATROL T-PLUS
Maximum turning length (Z-axis) : 61.3 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 16.9 in
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : MAZATROL FUSION 640 T
Maximum turning length (Z-axis) : 80.9 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13 in
CNC control model : MAZATROL FUSION 640 T
Maximum turning length (Z-axis) : 80.9 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 13 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : MAZATROL M-PLUS
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3307 lb
CNC control model : MAZATROL M-PLUS
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Maximum table load (evenly distributed) : 3307 lb
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : MAZATROL FUSION 640
Maximum turning length (Z-axis) : 63.2 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 15.4 in
CNC control model : MAZATROL FUSION 640
Maximum turning length (Z-axis) : 63.2 in
Turning diameter over bed (max) : 24 in
Turning diameter over cross slide (max) : 15.4 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : MAZATROL MATRIX NEXUS
Maximum turning length (Z-axis) : 21.7 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 17.7 in
CNC control model : MAZATROL MATRIX NEXUS
Maximum turning length (Z-axis) : 21.7 in
Turning diameter over bed (max) : 20.9 in
Maximum travel length in the X-axis : 17.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2010
CNC control model : MAZATROL MATRIX
Maximum turning length (Z-axis) : 83.5 in
Turning diameter over bed (max) : 33.3 in
Maximum travel length in the X-axis : 13.3 in
CNC control model : MAZATROL MATRIX
Maximum turning length (Z-axis) : 83.5 in
Turning diameter over bed (max) : 33.3 in
Maximum travel length in the X-axis : 13.3 in
United States
South Carolina
South Carolina
Year of manufacture : 1996
CNC control model : MAZATROL EIA
Maximum turning length (Z-axis) : 9.5 in
Turning diameter over bed (max) : 18.5 in
Turning diameter over cross slide (max) : 9.5 in
CNC control model : MAZATROL EIA
Maximum turning length (Z-axis) : 9.5 in
Turning diameter over bed (max) : 18.5 in
Turning diameter over cross slide (max) : 9.5 in
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : MAZATROL M-PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1210 lb
CNC control model : MAZATROL M-PLUS
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1210 lb
United States
South Carolina
South Carolina
Year of manufacture : 1997
CNC control model : MAZATROL T-PLUS
Maximum turning length (Z-axis) : 40.1 in
Turning diameter over bed (max) : 20.8 in
Turning diameter over cross slide (max) : 15.4 in
CNC control model : MAZATROL T-PLUS
Maximum turning length (Z-axis) : 40.1 in
Turning diameter over bed (max) : 20.8 in
Turning diameter over cross slide (max) : 15.4 in
United States
South Carolina
South Carolina
Year of manufacture : 1995
CNC control model : MAZATROL T-PLUS
Maximum turning length (Z-axis) : 22.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15.7 in
CNC control model : MAZATROL T-PLUS
Maximum turning length (Z-axis) : 22.8 in
Turning diameter over bed (max) : 20.9 in
Turning diameter over cross slide (max) : 15.7 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : MAZATROL MATRIX II NEXUS
Maximum turning length (Z-axis) : 123.3 in
Turning diameter over bed (max) : 29.5 in
Turning diameter over cross slide (max) : 22.8 in
CNC control model : MAZATROL MATRIX II NEXUS
Maximum turning length (Z-axis) : 123.3 in
Turning diameter over bed (max) : 29.5 in
Turning diameter over cross slide (max) : 22.8 in
United States
South Carolina
South Carolina
Year of manufacture : 2002
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 881 lb
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Maximum table load (evenly distributed) : 881 lb
United States
South Carolina
South Carolina
Year of manufacture : 1998
CNC control model : MAZATROL M-PLUS
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 660 lb
CNC control model : MAZATROL M-PLUS
Length of the working table : 15.7 in
Width of the working table : 15.7 in
Maximum table load (evenly distributed) : 660 lb
United States
South Carolina
South Carolina
Year of manufacture : 2000
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1760 lb
CNC control model : MAZATROL FUSION 640 M
Length of the working table : 57.5 in
Width of the working table : 20.1 in
Maximum table load (evenly distributed) : 1760 lb
United States
South Carolina
South Carolina
Lathes MAZAK
Lathes MAZAK QTN-200 II MS CNC [1]Lathes MAZAK QTN 450-II [1]
CNC Lathes and Turning Centers MAZAK
CNC Lathes and Turning Centers MAZAK MULTIPLEX 620 [4]CNC Lathes and Turning Centers MAZAK QT 6 T [3]
CNC Milling Machines and Machining Centers MAZAK
CNC Milling Machines and Machining Centers MAZAK PFH-4800 [7]CNC Milling Machines and Machining Centers MAZAK FH 6800 [5]
Lasers MAZAK
Lasers MAZAK SUPER TURBO X510 Hi-PRO Supercharged [2]Lasers MAZAK SUPER TURBO X-510 MKII [2]
