Jig borer KUNMING T4163C
Jig borer KUNMING T4163C was manufactured by the machine manufacturer KUNMING. Machine KUNMING T4163C was built in 1989 year.
General data | |
|---|---|
| Location | Poland |
| region | Dolnośląskie |
| Year of manufacture | 1989 |
| Warranty | Without warranty |
| Technical condition | Good |
| Payment | Before receipt |
| Transport | The buyer organizes the transport at his own cost |
| Status | A test can be performed |
Technical parameters | |
|---|---|
| Maximum drilling diameter in steel | 1.6 in |
| Maximum boring diameter | 9.8 in |
| Length of the working table | 43.3 in |
| Width of the working table | 24.8 in |
| Throat depth (distance of the spindle axis from the frame) | 27.6 in |
| Maximum distance from the spindle to the table | 29.1 in |
| Minimum rotary speed of the spindle | 55 1/min |
| Maximum rotary speed of the spindle | 2000 1/min |
| Maximum table load (evenly distributed) | 1322.8 lb |
| Machine height | 101.6 in |
| Machine length | 91.3 in |
| Machine width | 90.6 in |
| Machine weight | 7.5 short ton |
Equipment | |
|---|---|
| Technical documentation | |
