HARDINGE
Year of manufacture : 2007
CNC control model : FANUC 0i-MC
Number of tools in the magazine : 24 pcs
Maximum rotary speed of the vertical spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 28 in
CNC control model : FANUC 0i-MC
Number of tools in the magazine : 24 pcs
Maximum rotary speed of the vertical spindle : 12000 1/min
Travel length X-axis (mechanical feed) : 28 in
United States
Colorado
Colorado
Year of manufacture : 1998
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
United States
Colorado
Colorado
Year of manufacture : 2004
CNC control model : FANUC 0i-MB
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC 0i-MB
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
United States
Colorado
Colorado
Year of manufacture : 1992
CNC control model : SIEMENS SINUMERIK 810 T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
CNC control model : SIEMENS SINUMERIK 810 T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1996
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
CNC control model : FANUC 21-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
United States
Wisconsin
Wisconsin
Year of manufacture : 1999
CNC control model : FANUC O-MB
Length of the working table : 43.1 in
Width of the working table : 16.7 in
Power of the spindle drive : 15 hp
CNC control model : FANUC O-MB
Length of the working table : 43.1 in
Width of the working table : 16.7 in
Power of the spindle drive : 15 hp
United States
New York
New York
Year of manufacture : 1998
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 31 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 10 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 31 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 10 in
United States
New York
New York
Year of manufacture : 1998
Maximum turning length (Z-axis) : 11.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
Maximum turning length (Z-axis) : 11.1 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
United States
New York
New York
Year of manufacture : 1984
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1983
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6 in
Spindle bore : 1.3 in
32500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1990
CNC control model : FANUC 0-TB
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Maximum travel length in the X-axis : 4.5 in
CNC control model : FANUC 0-TB
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Maximum travel length in the X-axis : 4.5 in
United States
South Carolina
South Carolina
Year of manufacture : 2011
CNC control model : FANUC OT
Turning diameter over bed (max) : 19.5 in
Turning diameter over cross slide (max) : 14.5 in
Maximum feed rate in X-axis : 472 in/min
CNC control model : FANUC OT
Turning diameter over bed (max) : 19.5 in
Turning diameter over cross slide (max) : 14.5 in
Maximum feed rate in X-axis : 472 in/min
United States
Colorado
Colorado
Year of manufacture : 2007
CNC control model : FANUC 18i-MB
Length of the working table : 47.2 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2000 lb
CNC control model : FANUC 18i-MB
Length of the working table : 47.2 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 2000 lb
United States
New York
New York
Year of manufacture : 2011
CNC control model : OKUMA OSP CONTROL
Length of the working table : 44.1 in
Width of the working table : 21.3 in
Power of the spindle drive : 20 hp
CNC control model : OKUMA OSP CONTROL
Length of the working table : 44.1 in
Width of the working table : 21.3 in
Power of the spindle drive : 20 hp
United States
California
California
Year of manufacture : 2009
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 16 in
Turning diameter over bed (max) : 18 in
Turning diameter over cross slide (max) : 11.1 in
CNC control model : FANUC 18i-TB
Maximum turning length (Z-axis) : 16 in
Turning diameter over bed (max) : 18 in
Turning diameter over cross slide (max) : 11.1 in
United States
California
California
Year of manufacture : 1996
CNC control model : GE FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Maximum table load (evenly distributed) : 1650 lb
CNC control model : GE FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Maximum table load (evenly distributed) : 1650 lb
12500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1990
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 12 in
Turning diameter over bed (max) : 14 in
Turning diameter over cross slide (max) : 8 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2000
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 9.7 in
Number of spindles : 2 pcs
Maximum feed rate in X-axis : 472 in/min
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 9.7 in
Number of spindles : 2 pcs
Maximum feed rate in X-axis : 472 in/min
34500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2000
CNC control model : FANUC CONTROL SYSTEM II
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : FANUC CONTROL SYSTEM II
Length of the working table : 44 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2001
CNC control model : SIEMENS SINUMERIK 810 D
Length of the working table : 36.4 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
CNC control model : SIEMENS SINUMERIK 810 D
Length of the working table : 36.4 in
Width of the working table : 20 in
Maximum table load (evenly distributed) : 1540 lb
29500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1991
Maximum turning length (Z-axis) : 11 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
Maximum feed rate in Z-axis : 630 in/min
Maximum turning length (Z-axis) : 11 in
Maximum travel length in the X-axis : 12 in
Maximum feed rate in X-axis : 472 in/min
Maximum feed rate in Z-axis : 630 in/min
24500 USD
United States
Year of manufacture : 2009
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1983
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6.5 in
Spindle bore : 1.3 in
Maximum length of the turning : 18 in
Turning diameter over bed (max) : 11 in
Turning diameter over cross slide (max) : 6.5 in
Spindle bore : 1.3 in
17500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2004
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
24500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1999
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 21 in
Maximum travel length in the X-axis : 7.8 in
21500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1991
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.1 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC OT
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.1 in
Maximum travel length in the X-axis : 12 in
24500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 1995
CNC control model : GE FANUC 18 T
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.1 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC 18 T
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.1 in
Maximum travel length in the X-axis : 12 in
24500 USD
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2009
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
CNC control model : GE FANUC 21i-TB
Maximum turning length (Z-axis) : 11 in
Turning diameter over bed (max) : 11.8 in
Maximum travel length in the X-axis : 12 in
United States
Pennsylvania
Pennsylvania
Year of manufacture : 2009
CNC control model : FANUC CNC CONTROL
Turning diameter over bed (max) : 8 in
Maximum power of the main spindle : 15 hp
Maximum rotary speed of the main spindle : 5000 rpm
CNC control model : FANUC CNC CONTROL
Turning diameter over bed (max) : 8 in
Maximum power of the main spindle : 15 hp
Maximum rotary speed of the main spindle : 5000 rpm
United States
Florida
Florida
Year of manufacture : 1995
CNC control model : FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Power of the spindle drive : 20 hp
CNC control model : FANUC 18 M
Length of the working table : 40 in
Width of the working table : 19 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Lathes HARDINGE
Lathes HARDINGE HLV-H [7]Lathes HARDINGE DSM-59 [3]
CNC Lathes and Turning Centers HARDINGE
CNC Lathes and Turning Centers HARDINGE GT-27 SP [6]CNC Lathes and Turning Centers HARDINGE CONQUEST T 42 [2]
Milling Machines HARDINGE
Milling Machines HARDINGE U M [1]CNC Milling Machines and Machining Centers HARDINGE
CNC Milling Machines and Machining Centers HARDINGE VMC-1000 II [3]CNC Milling Machines and Machining Centers HARDINGE XR 1000 [2]
