H Frame Presses
Year of manufacture : 2018
Germany
Year of manufacture : 2000
Maximum force (pressing) : 250 t
Length of the bottom working table : 84 in
Width of the bottom working table : 48 in
Maximum length of the stroke of the upper table : 12 in
Maximum force (pressing) : 250 t
Length of the bottom working table : 84 in
Width of the bottom working table : 48 in
Maximum length of the stroke of the upper table : 12 in
13624 USD
Poland
Year of manufacture : 1997
Maximum force (pressing) : 630 t
Maximum number of strokes (manual work) : 16 1/min
Maximum number of strokes (automatic work) : 16 1/min
Minimum length of the stroke of the upper table : 15.7 in
Maximum force (pressing) : 630 t
Maximum number of strokes (manual work) : 16 1/min
Maximum number of strokes (automatic work) : 16 1/min
Minimum length of the stroke of the upper table : 15.7 in
Poland
Year of manufacture : 1996
Maximum force (pressing) : 200 t
Length of the bottom working table : 35.4 in
Width of the bottom working table : 55.1 in
Length of the upper working table : 35.4 in
Maximum force (pressing) : 200 t
Length of the bottom working table : 35.4 in
Width of the bottom working table : 55.1 in
Length of the upper working table : 35.4 in
81395 USD
Italy
Milano
Milano
Year of manufacture : 1996
Maximum force (pressing) : 630 t
Length of the bottom working table : 72.8 in
Width of the bottom working table : 49.2 in
Length of the upper working table : 72.8 in
Maximum force (pressing) : 630 t
Length of the bottom working table : 72.8 in
Width of the bottom working table : 49.2 in
Length of the upper working table : 72.8 in
Italy
Year of manufacture : 2006
Maximum force (pressing) : 400 t
Length of the bottom working table : 80.7 in
Width of the bottom working table : 49.2 in
Length of the upper working table : 80.7 in
Maximum force (pressing) : 400 t
Length of the bottom working table : 80.7 in
Width of the bottom working table : 49.2 in
Length of the upper working table : 80.7 in
Italy
Bergamo
Bergamo
Year of manufacture : 2000
Maximum force (pressing) : 400 t
Length of the bottom working table : 110.2 in
Width of the bottom working table : 63 in
Length of the upper working table : 110.2 in
Maximum force (pressing) : 400 t
Length of the bottom working table : 110.2 in
Width of the bottom working table : 63 in
Length of the upper working table : 110.2 in
Italy
Bergamo
Bergamo
Year of manufacture : 2000
Maximum force (pressing) : 400 t
Length of the bottom working table : 0 in
Width of the upper working table : 0 in
Maximum number of strokes (manual work) : 0 1/min
Maximum force (pressing) : 400 t
Length of the bottom working table : 0 in
Width of the upper working table : 0 in
Maximum number of strokes (manual work) : 0 1/min
Italy
Torino
Torino
Year of manufacture : 1995
Maximum force (pressing) : 250 t
Length of the bottom working table : 98.4 in
Width of the bottom working table : 55.1 in
Maximum distance between the tables (at the lower position of the slider) : 28.3 in
Maximum force (pressing) : 250 t
Length of the bottom working table : 98.4 in
Width of the bottom working table : 55.1 in
Maximum distance between the tables (at the lower position of the slider) : 28.3 in
116279 USD
Germany
Hamburg
Hamburg
Year of manufacture : 1992
Maximum force (pressing) : 160 t
Length of the bottom working table : 82.7 in
Width of the bottom working table : 37.4 in
Maximum number of strokes (manual work) : 100 1/min
Maximum force (pressing) : 160 t
Length of the bottom working table : 82.7 in
Width of the bottom working table : 37.4 in
Maximum number of strokes (manual work) : 100 1/min
Switzerland
Sankt Gallen
Sankt Gallen
-s.jpg)
Year of manufacture : 1996
Maximum force (pressing) : 250 t
Length of the bottom working table : 78.7 in
Width of the bottom working table : 31.5 in
Maximum distance between the tables (at the lower position of the slider) : 25.6 in
Maximum force (pressing) : 250 t
Length of the bottom working table : 78.7 in
Width of the bottom working table : 31.5 in
Maximum distance between the tables (at the lower position of the slider) : 25.6 in
Switzerland
Sankt Gallen
Sankt Gallen
-s.jpg)
Year of manufacture : 1997
CNC control model : SIEMENS S 5
Maximum force (pressing) : 160 t
Length of the bottom working table : 63 in
Width of the bottom working table : 27.6 in
CNC control model : SIEMENS S 5
Maximum force (pressing) : 160 t
Length of the bottom working table : 63 in
Width of the bottom working table : 27.6 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1992
CNC control model : BRUDERER
Maximum force (pressing) : 25 t
Length of the bottom working table : 25.6 in
Width of the bottom working table : 20.9 in
CNC control model : BRUDERER
Maximum force (pressing) : 25 t
Length of the bottom working table : 25.6 in
Width of the bottom working table : 20.9 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 2002
Maximum force (pressing) : 315 t
Maximum distance between the tables (at the lower position of the slider) : 19.7 in
Maximum number of strokes (manual work) : 80 1/min
Maximum length of the stroke of the upper table : 9.8 in
Maximum force (pressing) : 315 t
Maximum distance between the tables (at the lower position of the slider) : 19.7 in
Maximum number of strokes (manual work) : 80 1/min
Maximum length of the stroke of the upper table : 9.8 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1993
Maximum force (pressing) : 50 t
Length of the bottom working table : 18.9 in
Width of the bottom working table : 19.7 in
Maximum number of strokes (manual work) : 400 1/min
Maximum force (pressing) : 50 t
Length of the bottom working table : 18.9 in
Width of the bottom working table : 19.7 in
Maximum number of strokes (manual work) : 400 1/min
Switzerland
Sankt Gallen
Sankt Gallen
-s.jpg)
Year of manufacture : 1998
Maximum force (pressing) : 315 t
Length of the bottom working table : 102.4 in
Width of the bottom working table : 49.2 in
Maximum distance between the tables (at the lower position of the slider) : 41.9 in
Maximum force (pressing) : 315 t
Length of the bottom working table : 102.4 in
Width of the bottom working table : 49.2 in
Maximum distance between the tables (at the lower position of the slider) : 41.9 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1993
Maximum force (pressing) : 50 t
Length of the bottom working table : 37 in
Width of the bottom working table : 22 in
Maximum number of strokes (manual work) : 1050 1/min
Maximum force (pressing) : 50 t
Length of the bottom working table : 37 in
Width of the bottom working table : 22 in
Maximum number of strokes (manual work) : 1050 1/min
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 2007
CNC control model : UNIDOR
Maximum force (pressing) : 12 t
Length of the bottom working table : 14.6 in
Width of the bottom working table : 17.3 in
CNC control model : UNIDOR
Maximum force (pressing) : 12 t
Length of the bottom working table : 14.6 in
Width of the bottom working table : 17.3 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 2003
CNC control model : SIEMENS S 7
Maximum force (pressing) : 300 t
Length of the bottom working table : 35.4 in
Width of the bottom working table : 31.5 in
CNC control model : SIEMENS S 7
Maximum force (pressing) : 300 t
Length of the bottom working table : 35.4 in
Width of the bottom working table : 31.5 in
Switzerland
Sankt Gallen
Sankt Gallen
-s.jpg)
Year of manufacture : 1999
Maximum force (pressing) : 250 t
Length of the bottom working table : 70.9 in
Width of the bottom working table : 39.4 in
Maximum distance between the tables (at the lower position of the slider) : 24.8 in
Maximum force (pressing) : 250 t
Length of the bottom working table : 70.9 in
Width of the bottom working table : 39.4 in
Maximum distance between the tables (at the lower position of the slider) : 24.8 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1997
CNC control model : SIEMENS S 7
Maximum force (pressing) : 400 t
Length of the bottom working table : 106.3 in
Width of the bottom working table : 55.1 in
CNC control model : SIEMENS S 7
Maximum force (pressing) : 400 t
Length of the bottom working table : 106.3 in
Width of the bottom working table : 55.1 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1993
CNC control model : HARDMEIER CONTROL P-321
Maximum force (pressing) : 40 t
Length of the bottom working table : 11.8 in
Width of the bottom working table : 11.8 in
CNC control model : HARDMEIER CONTROL P-321
Maximum force (pressing) : 40 t
Length of the bottom working table : 11.8 in
Width of the bottom working table : 11.8 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 2001
Maximum force (pressing) : 400 t
Length of the bottom working table : 157.5 in
Width of the bottom working table : 78.7 in
Maximum distance between the tables (at the lower position of the slider) : 42.1 in
Maximum force (pressing) : 400 t
Length of the bottom working table : 157.5 in
Width of the bottom working table : 78.7 in
Maximum distance between the tables (at the lower position of the slider) : 42.1 in
Switzerland
Sankt Gallen
Sankt Gallen
Year of manufacture : 1996
CNC control model : HARDMEIER CONTROL ONC 1
Maximum force (pressing) : 250 t
Length of the bottom working table : 22 in
Width of the bottom working table : 22 in
CNC control model : HARDMEIER CONTROL ONC 1
Maximum force (pressing) : 250 t
Length of the bottom working table : 22 in
Width of the bottom working table : 22 in
Switzerland
Sankt Gallen
Sankt Gallen
