Machine categories
Grinding Machines / page 3
Year of manufacture : 1996
Minimum rotary speed of the spindle : 1000 1/min
Maximum rotary speed of the spindle : 6000 1/min
Travel length X-axis (hand feed) : 14.2 in
Travel length Y-axis (hand feed) : 5.9 in
Minimum rotary speed of the spindle : 1000 1/min
Maximum rotary speed of the spindle : 6000 1/min
Travel length X-axis (hand feed) : 14.2 in
Travel length Y-axis (hand feed) : 5.9 in
15000 USD
Germany
Year of manufacture : 1984
Length of the working table : 36 in
Width of the working table : 5.3 in
Power of the spindle drive : 0.737265 hp
Maximum rotary speed of the spindle : 5635 1/min
Length of the working table : 36 in
Width of the working table : 5.3 in
Power of the spindle drive : 0.737265 hp
Maximum rotary speed of the spindle : 5635 1/min
5041 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1979
Maximum length of the grinded hole : 6.3 in
Minimum diameter of the grinded hole : 0.393701 in
Maximum diameter of the grinded hole : 3.9 in
Maximum rotational speed the workpiece spindle : 700 1/min
Maximum length of the grinded hole : 6.3 in
Minimum diameter of the grinded hole : 0.393701 in
Maximum diameter of the grinded hole : 3.9 in
Maximum rotational speed the workpiece spindle : 700 1/min
4768 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1991
65395 USD
Poland
Mazowieckie
Mazowieckie
Year of manufacture : 1991
Maximum length of the grinded hole : 19.7 in
Minimum diameter of the grinded hole : 0.393701 in
Maximum diameter of the grinded hole : 12.4 in
Maximum weight of the grinded workpiece : 1102.3 lb
Maximum length of the grinded hole : 19.7 in
Minimum diameter of the grinded hole : 0.393701 in
Maximum diameter of the grinded hole : 12.4 in
Maximum weight of the grinded workpiece : 1102.3 lb
59946 USD
Poland
Mazowieckie
Mazowieckie
Year of manufacture : 1990
Rapid feed of the grinding wheel
Electromagnetic chuck
Permanent magnetic chuck
Demagnetizing of the chuck
Rapid feed of the grinding wheel
Electromagnetic chuck
Permanent magnetic chuck
Demagnetizing of the chuck
16349 USD
Poland
Year of manufacture : 1991
Maximum length of the grinded hole : 19.7 in
Minimum diameter of the grinded hole : 0.393701 in
Maximum diameter of the grinded hole : 12.4 in
Maximum weight of the grinded workpiece : 1102.3 lb
Maximum length of the grinded hole : 19.7 in
Minimum diameter of the grinded hole : 0.393701 in
Maximum diameter of the grinded hole : 12.4 in
Maximum weight of the grinded workpiece : 1102.3 lb
65395 USD
Poland
Mazowieckie
Mazowieckie
Year of manufacture : 1977
Minimum rotary speed of the spindle : 13000 1/min
Maximum rotary speed of the spindle : 45000 1/min
Minimum rotary speed of the spindle : 13000 1/min
Maximum rotary speed of the spindle : 45000 1/min
6395 USD
Germany
Year of manufacture : 1982
Diameter of a new grinding wheel : 13.8 in
Diameter of a new grinding wheel : 13.8 in
Germany
Year of manufacture : 1987
Length of the working table : 74.8 in
Width of the working table : 21.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Maximum table load (evenly distributed) : 2094.4 lb
Length of the working table : 74.8 in
Width of the working table : 21.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 15.7 in
Maximum table load (evenly distributed) : 2094.4 lb
Germany
Hessen
Hessen
Year of manufacture : 1980
Length of the working table : 17.7 in
Width of the working table : 7.9 in
Diameter of a new grinding wheel : 15.7 in
Maximum diameter of a grinding wheel : 7.9 in
Length of the working table : 17.7 in
Width of the working table : 7.9 in
Diameter of a new grinding wheel : 15.7 in
Maximum diameter of a grinding wheel : 7.9 in
Germany
Hamburg
Hamburg
Year of manufacture : 1979
Maximum rotary speed the grinding wheel spindle : 120000 1/min
Total power demand : 4 hp
Machine height : 70.9 in
Machine length : 43.3 in
Maximum rotary speed the grinding wheel spindle : 120000 1/min
Total power demand : 4 hp
Machine height : 70.9 in
Machine length : 43.3 in
Germany
Hessen
Hessen
Year of manufacture : 1991
Length of the working table : 23.6 in
Width of the working table : 14.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.8 in
Electromagnetic chuck
Length of the working table : 23.6 in
Width of the working table : 14.8 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 14.8 in
Electromagnetic chuck
Germany
Hessen
Hessen
Year of manufacture : 1992
Oil tank capacity : 528.3 US gallon
Total power demand : 20.1 hp
Machine height : 110.2 in
Machine length : 157.5 in
Oil tank capacity : 528.3 US gallon
Total power demand : 20.1 hp
Machine height : 110.2 in
Machine length : 157.5 in
2698 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1978
Maximum length of the grinding (shaft) : 196.9 in
Maximum diameter of the grinding (shaft) : 23.6 in
Center height : 12 in
Maximum weight of the shaft between the centers : 6613.9 lb
Maximum length of the grinding (shaft) : 196.9 in
Maximum diameter of the grinding (shaft) : 23.6 in
Center height : 12 in
Maximum weight of the shaft between the centers : 6613.9 lb
Poland
Year of manufacture : 1980
Maximal module : 0.314961 in
Minimal module : 0.019685 in
Maximum diameter of the gear wheel : 15.7 in
Machine weight : 9.9 short ton
Maximal module : 0.314961 in
Minimal module : 0.019685 in
Maximum diameter of the gear wheel : 15.7 in
Machine weight : 9.9 short ton
Poland
Year of manufacture : 1985
Length of the working table : 59.1 in
Width of the working table : 15.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
Length of the working table : 59.1 in
Width of the working table : 15.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 19.7 in
Maximum table load (evenly distributed) : 1102.3 lb
10218 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1977
Maximum length of the grinding (shaft) : 177.2 in
Maximum length of the shaft between the centers : 177.2 in
Maximum diameter of the grinding (shaft) : 39.4 in
Center height : 29.5 in
Maximum length of the grinding (shaft) : 177.2 in
Maximum length of the shaft between the centers : 177.2 in
Maximum diameter of the grinding (shaft) : 39.4 in
Center height : 29.5 in
Slovakia
Bratislavský kraj
Bratislavský kraj
Year of manufacture : 1990
Maximal module : 0.551181 in
Minimal module : 0.03937 in
Maximum diameter of the gear wheel : 31.5 in
Diameter of the table : 24.8 in
Maximal module : 0.551181 in
Minimal module : 0.03937 in
Maximum diameter of the gear wheel : 31.5 in
Diameter of the table : 24.8 in
13624 USD
Poland
Year of manufacture : 1975
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Length of the working table : 39.4 in
Width of the working table : 11.8 in
Czech Republic
Středočeský kraj
Středočeský kraj
Year of manufacture : 1980
Maximum length of the grinding (shaft) : 39.4 in
Maximum diameter of the grinding (shaft) : 11.8 in
Power of the grinding wheel spindle drive : 7.4 hp
Diameter of a new grinding wheel : 19.7 in
Maximum length of the grinding (shaft) : 39.4 in
Maximum diameter of the grinding (shaft) : 11.8 in
Power of the grinding wheel spindle drive : 7.4 hp
Diameter of a new grinding wheel : 19.7 in
5858 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1990
Maximum length of the grinding (shaft) : 157.5 in
Maximum length of the shaft between the centers : 157.5 in
Maximum diameter of the grinding (shaft) : 24.8 in
Center height : 173.2 in
Maximum length of the grinding (shaft) : 157.5 in
Maximum length of the shaft between the centers : 157.5 in
Maximum diameter of the grinding (shaft) : 24.8 in
Center height : 173.2 in
Germany
Year of manufacture : 1992
CNC control model : FANUC 0-GC
Maximum length of the grinding (shaft) : 24.4 in
Maximum length of the shaft between the centers : 28.3 in
Maximum diameter of the grinding (shaft) : 7.9 in
CNC control model : FANUC 0-GC
Maximum length of the grinding (shaft) : 24.4 in
Maximum length of the shaft between the centers : 28.3 in
Maximum diameter of the grinding (shaft) : 7.9 in
28488 USD
Austria
Year of manufacture : 1984
Length of the working table : 36 in
Width of the working table : 5.3 in
Maximum rotary speed of the spindle : 5635 1/min
Maximum distance from the table to the spindle axis : 12.2 in
Length of the working table : 36 in
Width of the working table : 5.3 in
Maximum rotary speed of the spindle : 5635 1/min
Maximum distance from the table to the spindle axis : 12.2 in
2861 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1992
Length of the working table : 39.4 in
Width of the working table : 15.7 in
Minimum distance from the table to the spindle axis : 4.9 in
Maximum distance from the table to the spindle axis : 22.6 in
Length of the working table : 39.4 in
Width of the working table : 15.7 in
Minimum distance from the table to the spindle axis : 4.9 in
Maximum distance from the table to the spindle axis : 22.6 in
15668 USD
Poland
Dolnośląskie
Dolnośląskie
Year of manufacture : 1990
Length of the working table : 23.8 in
Width of the working table : 12.2 in
Maximum length of grinding (without the grinding wheel output) X-axis : 24.8 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 13.8 in
Length of the working table : 23.8 in
Width of the working table : 12.2 in
Maximum length of grinding (without the grinding wheel output) X-axis : 24.8 in
Maximum width of grinding (without the grinding wheel output) Y-axis : 13.8 in
9302 USD
Spain
Guipúzcoa
Guipúzcoa
Year of manufacture : 1987
Length of the working table : 47.2 in
Width of the working table : 21.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.6 in
Maximum table load (evenly distributed) : 2645.6 lb
Length of the working table : 47.2 in
Width of the working table : 21.7 in
Maximum height of the grinded workpieces (for a new grinding wheel) : 24.6 in
Maximum table load (evenly distributed) : 2645.6 lb
23256 USD
Spain
Guipúzcoa
Guipúzcoa
