DAEWOO / page 2
Year of manufacture : 1999
CNC control model : FANUC 21-M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : FANUC 21-M
Length of the working table : 47 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
Florida
Florida
Year of manufacture : 2006
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 33 hp
CNC control model : FANUC 18i-MB
Length of the working table : 24.8 in
Width of the working table : 24.8 in
Power of the spindle drive : 33 hp
United States
Florida
Florida
Year of manufacture : 2001
CNC control model : FANUC 16 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
CNC control model : FANUC 16 M
Length of the working table : 15.8 in
Width of the working table : 15.8 in
Power of the spindle drive : 30 hp
United States
Florida
Florida
Year of manufacture : 2002
CNC control model : FANUC 16i-M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 25 hp
CNC control model : FANUC 16i-M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 25 hp
United States
Florida
Florida
Year of manufacture : 2004
CNC control model : FANUC 18i-MB
Number of tools in the magazine : 60 pcs
Maximum rotary speed of the spindle : 14000 1/min
Travel length X-axis (mechanical feed) : 33 in
CNC control model : FANUC 18i-MB
Number of tools in the magazine : 60 pcs
Maximum rotary speed of the spindle : 14000 1/min
Travel length X-axis (mechanical feed) : 33 in
United States
California
California
Year of manufacture : 2001
CNC control model : FANUC 16i-MB
Length of the working table : 24 in
Width of the working table : 24 in
Number of tools in the magazine : 60 pcs
CNC control model : FANUC 16i-MB
Length of the working table : 24 in
Width of the working table : 24 in
Number of tools in the magazine : 60 pcs
United States
California
California
Year of manufacture : 2010
CNC control model : FANUC CNC CONTROL
Length of the working table : 19.6 in
Width of the working table : 19.6 in
Maximum table load (evenly distributed) : 1102 lb
CNC control model : FANUC CNC CONTROL
Length of the working table : 19.6 in
Width of the working table : 19.6 in
Maximum table load (evenly distributed) : 1102 lb
United States
California
California
Year of manufacture : 1997
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 30 in
Turning diameter over bed (max) : 22 in
Turning diameter over cross slide (max) : 15 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 30 in
Turning diameter over bed (max) : 22 in
Turning diameter over cross slide (max) : 15 in
United States
New York
New York
Year of manufacture : 1997
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 13 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 13.7 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 13 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 13.7 in
United States
New York
New York
Year of manufacture : 2000
CNC control model : FANUC 18i
Length of the working table : 47.2 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1762 lb
CNC control model : FANUC 18i
Length of the working table : 47.2 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1762 lb
United States
New York
New York
Year of manufacture : 1998
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 13 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 11 in
CNC control model : FANUC 21 T
Maximum turning length (Z-axis) : 13 in
Turning diameter over bed (max) : 18.1 in
Turning diameter over cross slide (max) : 11 in
United States
Michigan
Michigan
Year of manufacture : 2004
CNC control model : FANUC 18i-MB
Length of the working table : 25.6 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 659.2 lb
CNC control model : FANUC 18i-MB
Length of the working table : 25.6 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 659.2 lb
United States
Michigan
Michigan
Year of manufacture : 2004
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 19.2 in
Maximum turning diameter : 16.5 in
Maximum travel length in the X-axis : 10.6 in
CNC control model : FANUC 21i-T
Maximum turning length (Z-axis) : 19.2 in
Maximum turning diameter : 16.5 in
Maximum travel length in the X-axis : 10.6 in
United States
Michigan
Michigan
Year of manufacture : 1998
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 17.3 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 13 in
CNC control model : FANUC 18 T
Maximum turning length (Z-axis) : 17.3 in
Turning diameter over bed (max) : 20.1 in
Turning diameter over cross slide (max) : 13 in
United States
Michigan
Michigan
Year of manufacture : 1995
CNC control model : FANUC 15-M
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 4400 lb
CNC control model : FANUC 15-M
Length of the working table : 39.4 in
Width of the working table : 39.4 in
Maximum table load (evenly distributed) : 4400 lb
United States
Illinois
Illinois
Year of manufacture : 1990
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.8 in
CNC control model : FANUC O-T
Maximum turning length (Z-axis) : 14 in
Turning diameter over bed (max) : 17.7 in
Turning diameter over cross slide (max) : 9.8 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : FANUC 16-M
Length of the working table : 55.1 in
Width of the working table : 27.6 in
Power of the spindle drive : 25 hp
CNC control model : FANUC 16-M
Length of the working table : 55.1 in
Width of the working table : 27.6 in
Power of the spindle drive : 25 hp
United States
Illinois
Illinois
Year of manufacture : 2000
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 25 in
Turning diameter over bed (max) : 23.2 in
Turning diameter over cross slide (max) : 15.7 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 25 in
Turning diameter over bed (max) : 23.2 in
Turning diameter over cross slide (max) : 15.7 in
United States
Illinois
Illinois
Year of manufacture : 1995
CNC control model : FANUC 15-M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
CNC control model : FANUC 15-M
Length of the working table : 19.7 in
Width of the working table : 19.7 in
Power of the spindle drive : 20 hp
United States
Illinois
Illinois
Year of manufacture : 2002
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 23 in
Turning diameter over bed (max) : 21 in
Turning diameter over cross slide (max) : 13.8 in
CNC control model : FANUC 18i-T
Maximum turning length (Z-axis) : 23 in
Turning diameter over bed (max) : 21 in
Turning diameter over cross slide (max) : 13.8 in
United States
Illinois
Illinois
Year of manufacture : 1997
CNC control model : MITSUBISHI M 520 L
Maximum turning length (Z-axis) : 51.8 in
Turning diameter over bed (max) : 22.4 in
Turning diameter over cross slide (max) : 15.7 in
CNC control model : MITSUBISHI M 520 L
Maximum turning length (Z-axis) : 51.8 in
Turning diameter over bed (max) : 22.4 in
Turning diameter over cross slide (max) : 15.7 in
United States
Illinois
Illinois
Year of manufacture : 1998
CNC control model : FANUC 15 T
Maximum turning length (Z-axis) : 20.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 14.6 in
CNC control model : FANUC 15 T
Maximum turning length (Z-axis) : 20.7 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 14.6 in
Canada
Year of manufacture : 1998
CNC control model : FANUC 15 T-FAPT
Maximum turning length (Z-axis) : 20.9 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 13 in
CNC control model : FANUC 15 T-FAPT
Maximum turning length (Z-axis) : 20.9 in
Turning diameter over bed (max) : 19.7 in
Turning diameter over cross slide (max) : 13 in
Canada
CNC Lathes and Turning Centers DAEWOO
CNC Lathes and Turning Centers DAEWOO PUMA 8HC-3A [2]CNC Lathes and Turning Centers DAEWOO LYNX 200 B [2]
CNC Milling Machines and Machining Centers DAEWOO
CNC Milling Machines and Machining Centers DAEWOO DHP-5000 [3]CNC Milling Machines and Machining Centers DAEWOO DMV-400 [2]
