CNC Vertical Machining Centers
Year of manufacture : 1987
Length of the working table : 30 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
Number of CNC controlled axles : 3 pcs
Length of the working table : 30 in
Width of the working table : 20 in
Power of the spindle drive : 10 hp
Number of CNC controlled axles : 3 pcs
United States
Wisconsin
Wisconsin
Year of manufacture : 1986
CNC control model : FANUC 11-M
Length of the working table : 131.9 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
CNC control model : FANUC 11-M
Length of the working table : 131.9 in
Width of the working table : 33.5 in
Maximum table load (evenly distributed) : 6600 lb
United States
Illinois
Illinois
Year of manufacture : 1982
CNC control model : FANUC 6-MB
Length of the working table : 82.7 in
Width of the working table : 27.5 in
Power of the spindle drive : 25 hp
CNC control model : FANUC 6-MB
Length of the working table : 82.7 in
Width of the working table : 27.5 in
Power of the spindle drive : 25 hp
United States
Colorado
Colorado
Year of manufacture : 1978
CNC control model : FANUC O-M
Length of the working table : 72 in
Width of the working table : 25 in
Power of the spindle drive : 15 hp
CNC control model : FANUC O-M
Length of the working table : 72 in
Width of the working table : 25 in
Power of the spindle drive : 15 hp
United States
Wisconsin
Wisconsin
Year of manufacture : 1987
CNC control model : FANUC 11 M
Length of the working table : 75 in
Width of the working table : 31.5 in
Number of tools in the magazine : 40 pcs
CNC control model : FANUC 11 M
Length of the working table : 75 in
Width of the working table : 31.5 in
Number of tools in the magazine : 40 pcs
United States
New York
New York
Year of manufacture : 1984
CNC control model : FANUC 18 M
Length of the working table : 63 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 3300 lb
CNC control model : FANUC 18 M
Length of the working table : 63 in
Width of the working table : 23.6 in
Maximum table load (evenly distributed) : 3300 lb
United States
New York
New York
Year of manufacture : 1983
CNC control model : FANUC 6 MB
Maximum table load (evenly distributed) : 2200 lb
Power of the spindle drive : 12 hp
Number of tools in the magazine : 30 pcs
CNC control model : FANUC 6 MB
Maximum table load (evenly distributed) : 2200 lb
Power of the spindle drive : 12 hp
Number of tools in the magazine : 30 pcs
United States
New York
New York
Year of manufacture : 1986
CNC control model : YASNAC MX-2
Power of the spindle drive : 15 hp
Number of tools in the magazine : 30 pcs
Maximum rotary speed of the vertical spindle : 4500 1/min
CNC control model : YASNAC MX-2
Power of the spindle drive : 15 hp
Number of tools in the magazine : 30 pcs
Maximum rotary speed of the vertical spindle : 4500 1/min
United States
New York
New York
Year of manufacture : 1986
CNC control model : YASNAC CNC CONTROL
Length of the working table : 66.9 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 4400 lb
CNC control model : YASNAC CNC CONTROL
Length of the working table : 66.9 in
Width of the working table : 25.6 in
Maximum table load (evenly distributed) : 4400 lb
United States
South Carolina
South Carolina
Year of manufacture : 1985
CNC control model : FANUC 10 M
Length of the working table : 30.9 in
Width of the working table : 14 in
Maximum table load (evenly distributed) : 529.2 lb
CNC control model : FANUC 10 M
Length of the working table : 30.9 in
Width of the working table : 14 in
Maximum table load (evenly distributed) : 529.2 lb
United States
South Carolina
South Carolina
Year of manufacture : 1985
CNC control model : FANUC 6 MB
Length of the working table : 43.3 in
Width of the working table : 20.4 in
Maximum table load (evenly distributed) : 1200 lb
CNC control model : FANUC 6 MB
Length of the working table : 43.3 in
Width of the working table : 20.4 in
Maximum table load (evenly distributed) : 1200 lb
United States
South Carolina
South Carolina
Year of manufacture : 1986
CNC control model : MAZATROL M-2
Length of the working table : 68.5 in
Width of the working table : 29.5 in
Maximum table load (evenly distributed) : 5500 lb
CNC control model : MAZATROL M-2
Length of the working table : 68.5 in
Width of the working table : 29.5 in
Maximum table load (evenly distributed) : 5500 lb
United States
South Carolina
South Carolina
Year of manufacture : 1985
CNC control model : MAZATROL M-2
Length of the working table : 35.4 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 660 lb
CNC control model : MAZATROL M-2
Length of the working table : 35.4 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 660 lb
United States
South Carolina
South Carolina
Year of manufacture : 1986
CNC control model : MAZATROL M 2
Length of the working table : 35.4 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 660 lb
CNC control model : MAZATROL M 2
Length of the working table : 35.4 in
Width of the working table : 16.1 in
Maximum table load (evenly distributed) : 660 lb
United States
South Carolina
South Carolina
Year of manufacture : 1985
CNC control model : FANUC 11
Length of the working table : 55.9 in
Width of the working table : 26 in
Maximum table load (evenly distributed) : 440 lb
CNC control model : FANUC 11
Length of the working table : 55.9 in
Width of the working table : 26 in
Maximum table load (evenly distributed) : 440 lb
United States
South Carolina
South Carolina
Year of manufacture : 1987
CNC control model : YASNAC MX-3
Length of the working table : 23.6 in
Width of the working table : 14.9 in
Maximum table load (evenly distributed) : 550 lb
CNC control model : YASNAC MX-3
Length of the working table : 23.6 in
Width of the working table : 14.9 in
Maximum table load (evenly distributed) : 550 lb
United States
South Carolina
South Carolina
Year of manufacture : 1987
CNC control model : FANUC 11 M
Length of the working table : 47.2 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1100 lb
CNC control model : FANUC 11 M
Length of the working table : 47.2 in
Width of the working table : 19.7 in
Maximum table load (evenly distributed) : 1100 lb
United States
South Carolina
South Carolina
Year of manufacture : 1985
CNC control model : FAGOR 8055 M
Length of the working table : 84 in
Width of the working table : 30 in
Power of the spindle drive : 25 hp
CNC control model : FAGOR 8055 M
Length of the working table : 84 in
Width of the working table : 30 in
Power of the spindle drive : 25 hp
United States
California
California
Year of manufacture : 1987
Length of the working table : 120 in
Width of the working table : 29.9 in
Power of the spindle drive : 25 hp
Maximum rotary speed of the vertical spindle : 3600 1/min
Length of the working table : 120 in
Width of the working table : 29.9 in
Power of the spindle drive : 25 hp
Maximum rotary speed of the vertical spindle : 3600 1/min
United States
California
California
Year of manufacture : 1987
CNC control model : FANUC 11 M
Power of the spindle drive : 20 hp
Minimum rotary speed of the vertical spindle : 30 1/min
Maximum rotary speed of the vertical spindle : 2000 1/min
CNC control model : FANUC 11 M
Power of the spindle drive : 20 hp
Minimum rotary speed of the vertical spindle : 30 1/min
Maximum rotary speed of the vertical spindle : 2000 1/min
United States
California
California
Year of manufacture : 1985
CNC control model : FANUC 6 M B 2
Number of tools in the magazine : 30 pcs
Maximum rotary speed of the vertical spindle : 3500 1/min
Travel length X-axis (mechanical feed) : 41.7 in
CNC control model : FANUC 6 M B 2
Number of tools in the magazine : 30 pcs
Maximum rotary speed of the vertical spindle : 3500 1/min
Travel length X-axis (mechanical feed) : 41.7 in
United States
California
California
Year of manufacture : 1984
CNC control model : FANUC 6 M
Length of the working table : 55 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
CNC control model : FANUC 6 M
Length of the working table : 55 in
Width of the working table : 20 in
Power of the spindle drive : 20 hp
United States
California
California
Year of manufacture : 1986
CNC control model : FANUC 6 M
Power of the spindle drive : 20 hp
Travel length X-axis (mechanical feed) : 61 in
Travel length Y-axis (mechanical feed) : 32 in
CNC control model : FANUC 6 M
Power of the spindle drive : 20 hp
Travel length X-axis (mechanical feed) : 61 in
Travel length Y-axis (mechanical feed) : 32 in
United States
California
California
Year of manufacture : 1985
CNC control model : YASNAC MX-1
Length of the working table : 34 in
Width of the working table : 15 in
Power of the spindle drive : 7 hp
CNC control model : YASNAC MX-1
Length of the working table : 34 in
Width of the working table : 15 in
Power of the spindle drive : 7 hp
United States
California
California
Year of manufacture : 1987
CNC control model : FANUC 15 M
Travel length X-axis (mechanical feed) : 80 in
Travel length Y-axis (mechanical feed) : 30 in
Travel length Z-axis (mechanical feed) : 27 in
CNC control model : FANUC 15 M
Travel length X-axis (mechanical feed) : 80 in
Travel length Y-axis (mechanical feed) : 30 in
Travel length Z-axis (mechanical feed) : 27 in
United States
California
California
Year of manufacture : 1986
CNC control model : YASNAC MX 3
Number of tools in the magazine : 30 pcs
Maximum rotary speed of the vertical spindle : 5200 1/min
Travel length X-axis (mechanical feed) : 20 in
CNC control model : YASNAC MX 3
Number of tools in the magazine : 30 pcs
Maximum rotary speed of the vertical spindle : 5200 1/min
Travel length X-axis (mechanical feed) : 20 in
United States
California
California
Year of manufacture : 1987
CNC control model : MAZAK M 2
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 16 in
Travel length Z-axis (mechanical feed) : 15.8 in
CNC control model : MAZAK M 2
Travel length X-axis (mechanical feed) : 22 in
Travel length Y-axis (mechanical feed) : 16 in
Travel length Z-axis (mechanical feed) : 15.8 in
United States
California
California
Year of manufacture : 1981
CNC control model : FANUC CNC CONTROL
Number of tools in the magazine : 41 pcs
Maximum rotary speed of the vertical spindle : 3000 1/min
Travel length X-axis (mechanical feed) : 45.4 in
CNC control model : FANUC CNC CONTROL
Number of tools in the magazine : 41 pcs
Maximum rotary speed of the vertical spindle : 3000 1/min
Travel length X-axis (mechanical feed) : 45.4 in
United States
California
California
Year of manufacture : 1980
CNC control model : FANUC 6 M
Length of the working table : 55.1 in
Width of the working table : 23.6 in
Number of tools in the magazine : 30 pcs
CNC control model : FANUC 6 M
Length of the working table : 55.1 in
Width of the working table : 23.6 in
Number of tools in the magazine : 30 pcs
United States
California
California
Year of manufacture : 1985
CNC control model : FANUC 15 M
Length of the working table : 83 in
Width of the working table : 27.5 in
Power of the spindle drive : 30 hp
CNC control model : FANUC 15 M
Length of the working table : 83 in
Width of the working table : 27.5 in
Power of the spindle drive : 30 hp
United States
California
California
